tools: Add firmware authenticated encryption tool ...

Add firmware authenticated encryption tool which utilizes OpenSSL
library to encrypt firmwares using a key provided via cmdline. Currently
this tool supports AES-GCM as an authenticated encryption algorithm.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I60e296af1b98f1912a19d5f91066be7ea85836e4

TBB: Add an IO abstraction layer to load encrypted firmwares ...

TBBR spec advocates for optional encryption of firmwares (see optional
requirement: R060_TBBR_FUNCTION). So add an IO abstaction layer to
support firmware decryption that can be stacked above any underlying IO/
packaging layer like FIP etc. It aims to provide a framework to load any
encrypted IO payload.

Also, add plat_get_enc_key_info() to be implemented in a platform
specific manner as handling of encryption key may vary from one platform
to another.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I9892e0ddf00ebecb8981301dbfa41ea23e078b03

drivers: crypto: Add authenticated decryption framework ...

Add framework for autheticated decryption of data. Currently this
patch optionally imports mbedtls library as a backend if build option
"DECRYPTION_SUPPORT = aes_gcm" is set to perform authenticated decryption
using AES-GCM algorithm.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I2966f0e79033151012bf4ffc66f484cd949e7271

Merge changes from topic "spmd-sel2" into integration ...

* changes:
  SPMD: add command line parameter to run SPM at S-EL2 or S-EL1
  SPMD: smc handler qualify secure origin using booleans
  SPMD: SPMC init, SMC handler cosmetic changes
  SPMD: [tegra] rename el1_sys_regs structure to sys_regs
  SPMD: Adds partially supported EL2 registers.
  SPMD: save/restore EL2 system registers.

Merge changes from topic "console_t_drvdata_fix" into integration ...

* changes:
  imx: console: Use CONSOLE_T_BASE for UART base address
  Tegra: spe: use CONSOLE_T_BASE to save MMIO base address

imx: console: Use CONSOLE_T_BASE for UART base address ...

Since commit ac71344e9eca we have the UART base address in the generic
console_t structure. For most platforms the platform-specific struct
console is gone, so we *must* use the embedded base address, since there
is no storage behind the generic console_t anymore.

Replace the usage of CONSOLE_T_DRVDATA with CONSOLE_T_BASE to fix this.

Change-Id: I6d2ab0bc2c845c71f98b9dd64d89eef3252f4591
Reported-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Tegra: spe: use CONSOLE_T_BASE to save MMIO base address ...

Commit ac71344 moved the base address
for the MMIO aperture of the console inside the console_t struct. As
a result, the driver should now save the MMIO base address to console_t
at offset marked by the CONSOLE_T_BASE macro.

This patch updates the SPE console driver to use the CONSOLE_T_BASE macro
to save/access the MMIO base address.

Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I42afc2608372687832932269108ed642f218fd40

Merge changes from topic "sp_loading" into integration ...

* changes:
  SPMD: loading Secure Partition payloads
  fvp: add Cactus/Ivy Secure Partition information
  fconf: Add Secure Partitions information as property

SPMD: loading Secure Partition payloads ...

This patch implements loading of Secure Partition packages using
existing framework of loading other bl images.

The current framework uses a statically defined array to store all the
possible image types and at run time generates a link list and traverse
through it to load different images.

To load SPs, a new array of fixed size is introduced which will be
dynamically populated based on number of SPs available in the system
and it will be appended to the loadable images list.

Change-Id: I8309f63595f2a71b28a73b922d20ccba9c4f6ae4
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

Merge "Update pathnames in maintainers.rst file" into integration

SPMD: add command line parameter to run SPM at S-EL2 or S-EL1 ...

Added SPMD_SPM_AT_SEL2 build command line parameter.
Set to 1 to run SPM at S-EL2.
Set to 0 to run SPM at S-EL1 (pre-v8.4 or S-EL2 is disabled).
Removed runtime EL from SPM core manifest.

Change-Id: Icb4f5ea4c800f266880db1d410d63fe27a1171c0
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

SPMD: smc handler qualify secure origin using booleans ...

Change-Id: Icc8f73660453a2cbb2241583684b615d5d1af9d4
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>

SPMD: SPMC init, SMC handler cosmetic changes ...

Change-Id: I8881d489994aea667e3dd59932ab4123f511d6ba
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

SPMD: [tegra] rename el1_sys_regs structure to sys_regs ...

Renamed the structure according to a SPMD refactoring
introduced in <c585d07aa> since this structure is used
to service both EL1 and EL2 as opposed to serving only EL1.

Change-Id: I23b7c089e53f617157a4b4e6443acce50d85c3b5
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

SPMD: Adds partially supported EL2 registers. ...

This patch adds EL2 registers that are supported up to ARMv8.6.
ARM_ARCH_MINOR has to specified to enable save/restore routine.

Note: Following registers are still not covered in save/restore.
 * AMEVCNTVOFF0<n>_EL2
 * AMEVCNTVOFF1<n>_EL2
 * ICH_AP0R<n>_EL2
 * ICH_AP1R<n>_EL2
 * ICH_LR<n>_EL2

Change-Id: I4813f3243e56e21cb297b31ef549a4b38d4876e1
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

fvp: add Cactus/Ivy Secure Partition information ...

Add load address and UUID in fw config dts for Cactus and Ivy which are
example SP's in tf-test repository.

For prototype purpose these information is added manually but later on
it will be updated at compile time from SP layout file and SP manifests
provided by platform.

Change-Id: I41f485e0245d882c7b514bad41fae34036597ce4
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

fconf: Add Secure Partitions information as property ...

Use the firmware configuration framework to retrieve information about
Secure Partitions to facilitate loading them into memory.

To load a SP image we need UUID look-up into FIP and the load address
where it needs to be loaded in memory.

This patch introduces a SP populator function which gets UUID and load
address from firmware config device tree and updates its C data
structure.

Change-Id: I17faec41803df9a76712dcc8b67cadb1c9daf8cd
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

Merge "doc: Fix variables names in TBBR CoT documentation" into integration

doc: Fix variables names in TBBR CoT documentation ...

In commit 516beb5 ("TBB: apply TBBR naming
convention to certificates and extensions"), some of the variables used in the
TBBR chain of trust got renamed but the documentation did not get properly
updated everywhere to reflect these changes.

Change-Id: Ie8e2146882c2d3538c5b8c968d1bdaf5ea2a6e53
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

SPMD: save/restore EL2 system registers. ...

NOTE: Not all EL-2 system registers are saved/restored.
This subset includes registers recognized by ARMv8.0

Change-Id: I9993c7d78d8f5f8e72d1c6c8d6fd871283aa3ce0
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

Merge changes I75f6d135,I4add470e,I0ecd3a2b,I67a63d73 into integration ...

* changes:
  board/rddaniel: intialize tzc400 controllers
  plat/arm/tzc: add support to configure multiple tzc400
  plat/arm: allow boards to specify second DRAM Base address
  plat/arm: allow boards to define PLAT_ARM_TZC_FILTERS

Merge "intel: Enable EMAC PHY in Intel FPGA platform" into integration

Merge "mt8173: Add support for new watchdog SMC" into integration

Merge "intel: Fix argument type for mailbox driver" into integration

Merge "fconf: Fix misra issues" into integration

Merge "Add Cortex-A65/AE to the supported FVP list" into integration

Merge "intel: Update RSU driver return code" into integration

fconf: Fix misra issues ...

MISRA C-2012 Rule 20.7:
Macro parameter expands into an expression without being wrapped by parentheses.

MISRA C-2012 Rule 12.1:
Missing explicit parentheses on sub-expression.

MISRA C-2012 Rule 18.4:
Essential type of the left hand operand is not the same as that of the right
operand.

Include does not provide any needed symbols.

Change-Id: Ie1c6451cfbc8f519146c28b2cf15c50b1f36adc8
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Add Cortex-A65/AE to the supported FVP list ...

Cortex-A65x4 and Cortex-A65AEx8 is now included in the list of the
supported Arm Fixed Virtual Platforms.

Signed-off-by: Imre Kis <imre.kis@arm.com>
Change-Id: Ibfcaec11bc75549d60455e96858d79b679e71e5e

intel: Update RSU driver return code ...

Modify RSU driver error code for backward-compatibility with
Linux RSU driver

Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ib9e38d4017efe35d3aceeee27dce451fbd429fb5