Change copyright guidelines ...

Copyright guidance has been changed for migration of the
ARM run project to trustedfirmware.org where the project
governance is different.

Change-Id: I059177453fb357843eced93c2a55b3705a379683
Signed-off-by: Joanna Farley <joanna.farley@arm.com>

Merge pull request #1702 from MISL-EBU-System-SW/patches-18.12 ...

Update code with latest changes from Marvell LSP 18.12

plat/marvell: update platform LSP version to 18.12.0 ...

Sync the platform code version with current Marvell LSP.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

a8k: pm: extend MSS_TRIGGER_TIMEOUT ...

Very rarely, during cpuidle operations the following error
is seen: "PM MSG Trigger Timeout".
This is caused by slow handling of message interrutps
in the PM FW running on CM3 (under heavy PM operation load).

This is not a real issue, so we extend the timeout to
avoid the error prints.

Change-Id: I92fd6f2ff1ddf208b216c123880ded28a00b6e0e
Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-on: http://vgitil04.il.marvell.com:8080/59670
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Tested-by: iSoC Platform CI <ykjenk@marvell.com>

plat/marvell: comphy: Add support for SFI on Lane 4 ...

Add static configuration for SFI+ 10Gbps interface on SERDES
Lane 4.
This is just a copy of Lane 2 static values, not optimized.
Board-to-board iperf test shows up to 6Gbps transfer speed.

Change-Id: I024d2ac132f7fa6c342a64367f3dca2123a27e97
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Igal Liberman <igall@marvell.com>

doc: marvell: Update build manual with new memory layouts ...

Add description for memory layouts used by EspressoBin v7 (DDR4)

Change-Id: I199d8b52580b26e560f14b503a6e99d32de4f284
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: http://vgitil04.il.marvell.com:8080/61279
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Tested-by: iSoC Platform CI <ykjenk@marvell.com>

fix: a3900: pm: fix number of CPU power switches. ...

- Number of open power switches for CPUs should be three
  and now two.

- This patch updates the value of open power switches from
  0xfd (two power-switches) to 0xfc (three power-switches).

Change-Id: I2783ab7f04bbbb6da78eeedcabe4636f9a774512
Signed-off-by: Christine Gharzuzi <chrisg@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

svc: Update the EEPROM AVS values processing ...

Add support for SVC test builds for tuning AVS values.
Update the SVC procedure and add EEPROM access.
Add support for AP807 AVS values (10 bits wide).

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

ble: ap807: Switch to PLL mode and update CPU frequency ...

- Update CPU frequency on AP807 to 2GHz for SAR 0x0.
- Increase AVS to 0.88V for 2GHz clock

Change-Id: Ic945b682ab2f8543e34294bfc56c3eae2c5e0c8e
Signed-off-by: Christine Gharzuzi <chrisg@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

mvebu: cp110: avoid pcie power on/off sequence when called from Linux ...

In Armada 8K DB boards, PCIe initialization can be executed only once
because PCIe reset performed during chip power on and it cannot be
executed via GPIO later.
This means that power on can be executed only once, when it's called
from the bootloader.
Power on:
	Read bit 21 of the mode, it marks if the caller is
	the bootloader or the Linux Kernel.
Power off:
	Check if the comphy was already configured to PCIe, if yes,
	check if the caller is bootloader, if both conditions are true
	(PCIe mode and called by Linux) - skip the power-off.

In addition, fix incorrect documentation describing mode fields -
PCIe width is 3 bits, not 2.

NOTE: with this patch, please use LK4.14.76 (LK4.4.120 may not work
with it).

Change-Id: I4b929011f97a0a1869a51ba378687e78b3eca4ff
Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

plat: marvell: a3700: do not power off cpu due to errata ref #13 ...

Do not power off the CPU1 since there is no way to wake it up
(wake-up is causing CPU0 reset as well duo to HW bug). Quote from errata
Ref #13 [In power saving mode, both cores must be powered off]:
"When Core 0 is on and Core 1 is in power-off state, a Core 1
wake-up resets Core 0 as well and puts Core 0 back to ROM".

To overcome described HW bug instead of powering the CPU off, let it
reach WFI instruction, which is invoked by generic psci_do_cpu_off
function after platform handler finishes. This will put the core in low
power state and give a chance to wake it up.

Before this change, after running secondary kernel via kexec, only one
core was up, now both cores are up.

Change-Id: I87f144867550728055d9b8a2edb84a14539acab7
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

mvebu: cp110: fix phy selector configuration for XFI1 ...

Extended phy selector configuration about XFI1 mode.

Change-Id: I1309770bbb5fdbfb0127b6f12ee78974d1d6b19f
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

Merge pull request #1699 from chandnich/sgi-mt-support ...

Add support to implement multi-threaded platforms for SGI

Merge pull request #1701 from chandnich/psci-ops ...

remove weak implemention of 'plat_arm_psci_override_pm_ops'

Merge pull request #1688 from JoelHutton/jh/variant_1_mitigations ...

Initial Spectre V1 mitigations (CVE-2017-5753).

Merge pull request #1698 from hzhuang1/rm_emmc_delay ...

Rm emmc delay

Merge pull request #1679 from pangupta/master ...

ccn: Introduce API to set and read value of node register

plat/arm: remove weak implemention of 'plat_arm_psci_override_pm_ops' function ...

In order to allow Arm platforms to override the default list of PSCI
callbacks, remove the existing weak implementation of
'plat_arm_psci_override_pm_ops' function and let all the Arm platforms
implement their own 'plat_arm_psci_override_pm_ops' function.

For platforms that support SCMI protocol, the function
'css_scmi_override_pm_ops' can be additionally used as well to
override the default PSCI callbacks.

Change-Id: If7c27468bd51a00ea9c2a3716b5894163f5a9f3c
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

Merge pull request #1693 from jeenu-arm/ehf-doc ...

EHF and RAS documentation

Merge pull request #1696 from satheesbalya-arm/sb1/sb1_2406_romlib_juno ...

romlib: Add juno support for romlib

Merge pull request #1695 from satheesbalya-arm/sb1/sb1_2641_romlib_phase2 ...

romlib: Allow patching of romlib functions

plat/arm/sgi: allow value of PLAT_MAX_PWR_LVL to be platform specific ...

For platforms with multi-threaded CPUs, the number of power domains
supported would be more than the value currently defined by
PLAT_MAX_PWR_LVL. So move the PLAT_MAX_PWR_LVL macro to platform
specific code and let the platform define the number of power domain
levels.

Change-Id: I21c0682e62b397860b2999031a0c9c5ce0d28eed
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

plat/arm/sgi: override weak implementation of plat_arm_get_cpu_pe_count ...

To support platforms which are based on multi-threaded CPUs, override
the weak implementation of plat_arm_get_cpu_pe_count function to return
the number of threads supported by the CPU used in the platform.

Change-Id: Ia680773f1277b17e2d3d2414d87943dcece33e89
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

plat/arm/common: add an additional platform power level ...

For platforms using multi-threaded CPUs, there can be upto four
platform power domain levels. At present, there are three platform
power domain levels that are defined for the CSS platforms. Define a
fourth level 'ARM_PWR_LVL3' as well to provide support for an
additional platform power domain level.

Change-Id: I40cc17a10f4690a560776f504364fd7277a7e72a
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

plat/css: allow platforms to define the system power domain level ...

The CSS_SYSTEM_PWR_DMN_LVL macro that defines the system power domain
level is fixed at ARM_PWR_LVL2 for all CSS platforms. However, the
system power domain level can be different for CSS platforms that
use multi-threaded CPUs.

So, in preparation towards adding support for platforms that use
multi-threaded CPUs, refactor the definition of CSS_SYSTEM_PWR_DMN_LVL
such that CSS_SYSTEM_PWR_DMN_LVL is uniquely defined for each of the
CSS platform.

Change-Id: Ia837b13f6865e71da01780993c048b45b7f36d85
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

docs: Add RAS framework documentation ...

Change-Id: Ibf2b21b12ebc0af5815fc6643532a3be9100bf02
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Initial Spectre V1 mitigations (CVE-2017-5753). ...

Initial Spectre Variant 1 mitigations (CVE-2017-5753).
A potential speculative data leak was found in PSCI code, this depends
on a non-robust implementation of the `plat_get_core_pos_by_mpidr()`
function. This is considered very low-risk. This patch adds a macro to
mitigate this. Note not all code paths could be analyzed with current
tools.

Add a macro which makes a variable 'speculation safe', using the
 __builtin_speculation_safe_value function of GCC and llvm. This will be
available in GCC 9, and is planned for llvm, but is not currently in
mainline GCC or llvm. In order to implement this mitigation the compiler
must support this builtin. Support is indicated by the
__HAVE_SPECULATION_SAFE_VALUE flag.

The -mtrack-speculation option maintains a 'tracker' register, which
determines if the processor is in false speculation at any point. This
adds instructions and increases code size, but avoids the performance
impact of a hard barrier.

Without the -mtrack-speculation option, __builtin_speculation_safe_value
expands to a

    ISB
    DSB SY

sequence after a conditional branch, before the
speculation safe variable is used. With -mtrack-speculation a

    CSEL tracker, tracker, XZR, [cond];
    AND safeval,tracker;
    CSDB

sequence is added instead, clearing the vulnerable variable by
AND'ing it with the tracker register, which is zero during speculative
execution. [cond] are the status flags which will only be true during
speculative execution. For more information on
__builtin_speculation_safe_value and the -mtrack-speculation option see
https://developer.arm.com/support/arm-security-updates/speculative-processor-vulnerability/compiler-support-for-mitigations

The -mtracking option was not added, as the performance impact of the
mitigation is low, and there is only one occurence.

Change-Id: Ic9e66d1f4a5155e42e3e4055594974c230bfba3c
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

docs: Add Exception Handling Framework documentation ...

Change-Id: I77d38758d18ba6dda1652b1b1e644fbfb14386cc
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

SDEI: Unconditionally resume Secure if it was interrupted ...

Secure world execution nearly always expect a controlled exit to
Non-secure world. SDEI interrupts, although targets EL3, occur on behalf
of Non-secure world, and may have higher priority than Secure world
interrupts. Therefore they might preempt Secure execution, and yield
execution to Non-secure SDEI handler. Upon completion of SDEI event
handling (regardless of whether it's COPLETE or COMPLETE_AND_RESUME), we
must resume Secure execution if it was preempted.

Change-Id: I6edd991032588588427ba2fe6c3d7668f7080e3d
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Merge pull request #1697 from antonio-nino-diaz-arm/an/arch ...

Synchronise arch.h and arch_helpers.h with TF-A-Tests