LuminaSensum/arm-trusted-firmware

Fork: 0

LuminaSensum / arm-trusted-firmware

2019-01-08	c97c5b5 Browse files » rcar_gen3: drivers: delay: Rewrite from assembler to C ... Rewrite the delay code from assembler to C. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	47141b7 Browse files » rcar_gen3: plat: Add generic timer init ... Add code to determine the platform timer frequency and configure the generic timer accordingly early in BL2. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	452031e Browse files » rcar_gen3: drivers: scif: Use TEND flag for transmission end detection ... Use the SCIF SCFSR:TEND bit to check that all data were transmitted by the SCIF and that there are no more valid data to transmit in the FIFO. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	e32b622 Browse files » rcar_gen3: drivers: qos: Synchronize tables ... Synchronize the QoS tables with Renesas ATF release 2.0.0 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	042b4d4 Browse files » rcar_gen3: drivers: pfc: Synchronize tables ... Synchronize the pin control tables with Renesas ATF release 2.0.0 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	544cc72 Browse files » rcar_gen3: drivers: ddr-b: Synchronize tables ... Synchronize the R-Car DDR-B driver, used on R-Car H3/M3W/M3N, with Renesas ATF release 2.0.0 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	aff7e00 Browse files » rcar_gen3: drivers: ddr-a: Checkpatch cleanup ... Run Linux kernel checkpatch on the DDR-A init code to clean it up: $ checkpatch.pl --fix --fix-inplace -f drivers/staging/renesas/rcar/ddr/ddr_a/* Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	5e3c4bb Browse files » rcar_gen3: drivers: ddr-a: Synchronize tables ... Synchronize the R-Car DDR-A driver, used on R-Car E3, with Renesas ATF release 2.0.0 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	bd57db5 Browse files » rcar_gen3: drivers: cpld: Move rcar_cpld_reset_cpu() into header ... Move the rcar_cpld_reset_cpu() function into header file and zap the externs. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	8cbc417 Browse files » rcar_gen3: drivers: swdt: Access SCR in EL3 ... The code runs in EL3, use EL3 accessors to manipulate the interrupt bit. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	dc03e84 Browse files » rcar_gen3: drivers: auth-mod: Access SCTLR in EL3 ... The code runs in EL3, use EL3 accessors to manipulate the cache bits. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	c6ae55c Browse files » rcar_gen3: plat: Dump EL3 interrupt error registers ... Since the interrupts are handled in EL3, dump the EL3 error registers in case an error happens. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	d48536e Browse files » rcar_gen3: plat: Enable programmable CPU reset address ... The reset address is programmable on the R-Car Gen3, enable it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	3238542 Browse files » rcar_gen3: plat: Disable IPMMU PV0 cache on E3 ... Disable the IPMMU PV0 cache on E3 rev. 1.x . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	71430ed Browse files » rcar_gen3: plat: Add E3 rev. 1.1 support ... Add support for R-Car E3 silicon rev. 1.1 Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	0468aa3 Browse files » rcar_gen3: plat: Add missing platform auto-detection name ... Add missing TARGET_NAME for the case where RCAR_LSI is set to AUTO, which is platform auto-detection. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	b51a773 Browse files » rcar_gen3: plat: Clean up rcar_pwrc_code_copy_to_system_ram() ... Call the function only from architecture setup and at the end of suspend cycle instead of calling it all over the place. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	bc5fabd Browse files » rcar_gen3: plat: Fix BL2 size check ... Rename BL2_LIMIT to BL2_IMAGE_LIMIT and BL2_SYSRAM_LIMIT to BL2_LIMIT to correctly set BL2_LIMIT value. Set correct DEVICE_SRAM_BASE to match the hardware. Use BL2_END in rcar_configure_mmu_el3() to mark the cacheable BL2 area. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	fc181c3 Browse files » rcar_gen3: plat: Staticize memory maps ... Staticize the platform memory map tables as they are only used within the platform_common.c file. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	db9a155 Browse files » rcar_gen3: plat: Function cleanup ... Replace foo_t with struct foo. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	53ff5c7 Browse files » rcar_gen3: plat: Fix cache line size ... The CPU has cache line size of 64 Bytes, fix the cache line size. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	8a2f1ee Browse files » rcar_gen3: plat: Disable SVE ... Apply 3872fc2d1fc5 ("Do not enable SVE on pre-v8.2 platforms") to R-Car Gen3 too. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	539caac Browse files » rcar_gen3: plat: Add missing dependency to rcar_srecord ... Add missing dependency on the bl2.elf and bl31.elf into the rcar_srecord target, which uses those ELF files to generate the SRECs. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	e0dd5bb Browse files » rcar_gen3: plat: Rename H3 label ... Rename the H3 label to avoid confusing clang, which generates an error if the label is just H3. Rename it to RCARH3. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	a72e4f2 Browse files » rcar_gen3: plat: Drop ddr_regdef_len() ... This function is unused and triggers clang error, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Marek Vasut committed on 8 Jan 2019
	Unverified c871903 Browse files » Merge pull request #1740 from soby-mathew/sm/restrict_pie_to_fvp ... plat/arm: Restrict PIE support to FVP Antonio Niño Díaz authored on 8 Jan 2019 GitHub committed on 8 Jan 2019
	Unverified 4423046 Browse files » Merge pull request #1742 from sandrine-bailleux-arm/sb/fix-arm-mk ... Fix a variable expansion in Arm platform makefiles Antonio Niño Díaz authored on 8 Jan 2019 GitHub committed on 8 Jan 2019
	Unverified bddb5df Browse files » Merge pull request #1741 from deepan02/deepan02-arm-uart-definations ... plat/arm/n1sdp: define the uart constants for N1SDP Antonio Niño Díaz authored on 8 Jan 2019 GitHub committed on 8 Jan 2019
	Unverified f0ea342 Browse files » Merge pull request #1739 from Yann-lms/includes ... stm32mp1: do not include platform header files directly in drivers Antonio Niño Díaz authored on 8 Jan 2019 GitHub committed on 8 Jan 2019
	Unverified bd0bad1 Browse files » Merge pull request #1736 from antonio-nino-diaz-arm/an/maintainers ... maintainers: Fix path of Marvell documentation Antonio Niño Díaz authored on 8 Jan 2019 GitHub committed on 8 Jan 2019