stm32mp1: remove some dependencies on clocks and reset in drivers ...

Include all RCC, clocks and reset headers from stm32mp1_def.h
which if exported to the firmware through platform_def.h.
The same dependency removal is done in common code as well.
Some useless includes are also removed in stm32_sdmmc2 driver.

Change-Id: I731ea5775c3fdb7f7b0c388b93923ed5e84b8d3f
Signed-off-by: Yann Gautier <yann.gautier@st.com>

stm32mp1: make functions and macros more common ...

Mainly remove suffix 1 from prefix stm32mp1 in several macros and functions
that can be used in drivers shared by different platforms.

Change-Id: I2295c44f5b1edac7e80a93c0e8dfd671b36e88e7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

stm32mp1: split code between common and private parts ...

Some parts of code could be shared with platform derivatives,
or new platforms.
A new folder plat/st/common is created to put common parts.

stm32mp_common.h is a common API aggregate.

Remove some casts where applicable.
Fix some types where applicable.
Remove also some platform includes that are already in stm32mp1_def.h.

Change-Id: I46d763c8d9e15732d1ee7383207fd58206d7f583
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Merge pull request #1820 from thloh85-intel/integration_mbr ...

drivers: partition: Add simple MBR partition entries support

Merge pull request #1819 from thloh85-intel/integration ...

plat: intel: Fix faulty DDR calibration value

Merge pull request #1813 from oscardagrach/hikey960-iomcu-dma ...

hikey960: enable IOMCU DMAC

Merge pull request #1816 from grandpaul/paulliu-warp7-multiconsoleapi ...

imx: warp7: Migrate to MULTI_CONSOLE_API

Merge pull request #1814 from glneo/ti-sci-async ...

TI-SCI asynchronous power down sequencing

plat: intel: Fix faulty DDR calibration value ...

A DDR calibration value is missing write mask, causing ECC DDR calibration
to fail. This patch addresses the issue. ECC should also be scrubbed before
MMU initializes, thus the scrubbing is moved to ddr intialization phase.

Signed-off-by: Loh Tien Hock <tien.hock.loh@intel.com>

drivers: partition: Add simple MBR partition entries support ...

This is to add simple MBR partition entry support. This will read all four
MBR partition into the partition list, and the partition type will be saved
in the list.name[0] entry.

Signed-off-by: Loh Tien Hock <tien.hock.loh@intel.com>

Merge pull request #1812 from antonio-nino-diaz-arm/an/fix-cortex ...

Fix CPU headers' definitions

Merge pull request #1817 from antonio-nino-diaz-arm/an/spd-includes ...

Sanitize SPD include paths

Merge pull request #1818 from pbeesley-arm/doc-links ...

doc: Fix broken external links

Sanitize SPD include paths ...

Commit 09d40e0e0828 ("Sanitise includes across codebase") modified the
include paths of the TSP includes but it didn't remove the include path
from the makefile or did the same for TLK. This patch does the remaining
work.

Change-Id: Iecee2e88fabcd06989d35568c3a4c1f4e7d93572
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

imx: warp7: Migrate to MULTI_CONSOLE_API ...

This commit migrates to MULTI_CONSOLE_API for IMX Warp7 board.
We also rename the functions in imx_uart driver to more specific one.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>

ti: k3: common: Do not release processor control on startup ...

ATF should be the only host needing to control a processor that it has
started. ATF will need this control to stop the core later. Do not
relinquish control of a core after starting the core.

Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: drivers: ti_sci: Use non-blocking TI-SCI messages for power down ...

Now that we have non-blocking TI-SCI functions we can initiate the shutdown
sequence from the PSCI handler without needing the ti_sci_proc_shutdown
helper function, which is removed. This gives us the greater control and
flexibility that will be needed when cluster power down sequences are added.

Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: drivers: ti_sci: Add non-blocking TI-SCI messages ...

Most TI-SCI functions request an ACK and wait until it is received. For
some power sequence tasks we cannot wait but instead queue messages
asynchronously. Three messages have been identified that will need to
be used in this way. Add non-waiting versions of these functions.

Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: drivers: ti_sci: Request and check for ACK by default ...

Currently almost all TI-SCI messages request and check for an ACK from
the system firmware. Move this into a common place to remove the same
from each function.

Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: drivers: ti_sci: Add exclusive device accessors ...

When a device is requested with TI-SCI its control can be made exclusive
to the requesting host. This was currently the default but is not what
is needed most of the time. Add _exclusive versions of the request
functions and remove the exclusive flag from the default version.

Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: drivers: ti_sci: Internalize raw get/set state functions ...

The raw get and set state functions for both devices and clocks
are only meant for use internal to the TI-SCI driver, the same
functionality is available from the other API that call into
these. Remove them from the external interface and make them
static scope to the driver.

Signed-off-by: Andrew F. Davis <afd@ti.com>

hikey960: enable IOMCU DMAC ...

There exists a third DMA controller on the hi3660
SoC called the IOMCU DMAC. This controller is used by
peripherals like SPI2 and UART3. Initialize channels 4-7
as non-secure, while 0-3 remain reserved and secure.

Signed-off-by: Ryan Grachek <ryan@edited.us>

cpus: Add casts to all definitions in CPU headers ...

There are some incorrect casts and some missing casts in the headers.
This patch fixes the ones that were 64-bit or 32-bit wide wrongly and
adds casts where they were missing.

Note that none of the changes of the patch actually changes the values
of the definitions. This patch is just for correctness.

Change-Id: Iad6458021bad521922ce4f91bafff38b116b49eb
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

cpus: Fix some incorrect definitions in CPU headers ...

There are some values that should be 64-bit immediates but that resolve
to 0 because the type of the value is 32-bit wide. This patch casts the
expressions to 64-bit before the shift so that the definition has the
correct value.

The definitions are only used in assembly so far, so the code is not
actually affected by this bug. The assembler treats all values as 64-bit
values, so there are no overflows.

Change-Id: I965e4be631c1d28787c0913661d224c82a6b9155
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Merge pull request #1810 from antonio-nino-diaz-arm/an/setjmp ...

Make setjmp/longjmp compliant with the C standard and move them to libc

Merge pull request #1808 from sandrine-bailleux-arm/sb/maintainers ...

maintainers: Fix broken links to some Github accounts

Merge pull request #1811 from sandrine-bailleux-arm/sb/doc-fixes ...

Miscellaneous documentation fixes

doc: Fix broken external links ...

Using Sphinx linkcheck on the TF-A docs revealed some broken
or permanently-redirected links. These have been updated where
possible.

Change-Id: Ie1fead47972ede3331973759b50ee466264bd2ee
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Doc: Remove useless escape characters ...

Just like has been done in the porting guide a couple of patches
earlier, kill all escaped underscore characters in all documents.

Change-Id: I7fb5b806412849761d9221a6ce3cbd95ec43d611
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Miscellaneous doc fixes/enhancements ...

Change-Id: I915303cea787d9fb188428b98ac6cfc610cc4470
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>