Merge commit 'for-v0.4/05.20^' into for-v0.4 ...

Conflicts:
	plat/fvp/bl32_plat_setup.c
	plat/fvp/platform.mk
	services/spd/tspd/tspd_main.c

Change-Id: Ib4bad39a8a476a6b1796298f95dfb97c8b100975

Rework memory information passing to BL3-x images ...

The issues addressed in this patch are:

1. Remove meminfo_t from the common interfaces in BL3-x,
expecting that platform code will find a suitable mechanism
to determine the memory extents in these images and provide
it to the BL3-x images

2. Remove meminfo_t and bl31_plat_params_t from all FVP BL3-x
code as the images use link-time information to determine
memory extents.

meminfo_t is still used by common interface in BL1/BL2 for
loading images

Change-Id: I4e825ebf6f515b59d84dc2bdddf6edbf15e2d60f

Populate BL31 input parameters as per new spec ...

This patch rearranges the bl31_args  struct into
bl31_params and bl31_plat_params which provide the
information needed for Trusted firmware and platform
specific data via x0 and x1

On the FVP platform BL3-1 params and BL3-1 plat params
and its constituents are stored at the start of TZDRAM.

The information about memory availability and size for
BL3-1, BL3-2 and BL3-3 is moved into platform specific data.

Change-Id: I8b32057a3d0dd3968ea26c2541a0714177820da9

Extend SPSR definitions for full use of ELx modes ...

Extended SPSR definitions with all the fields to allow full use
of EL2/EL1 execution modes for entry points

Replaced make_spsr() with SPSR_64 macro and added SPSR_32 macro
for generating AARCH32 mode SPSR

Change-Id: I9425dda0923e8d5f03d03ddb8fa0e28392c4c61e

Non-Secure Interrupt support during Standard SMC processing in TSP ...

Implements support for Non Secure Interrupts preempting the
Standard SMC call in EL1. Whenever an IRQ is trapped in the
Secure world we securely handover to the Normal world
to process the interrupt. The normal world then issues
"resume" smc call to resume the previous interrupted SMC call.
Fixes ARM-software/tf-issues#105

Change-Id: I72b760617dee27438754cdfc9fe9bcf4cc024858

Add S-EL1 interrupt handling support in the TSPD ...

This patch adds support in the TSPD for registering a handler for
S-EL1 interrupts. This handler ferries the interrupts generated in the
non-secure state to the TSP at 'tsp_fiq_entry'. Support has been added
to the smc handler to resume execution in the non-secure state once
interrupt handling has been completed by the TSP.

There is also support for resuming execution in the normal world if
the TSP receives a EL3 interrupt. This code is currently unused.

Change-Id: I816732595a2635e299572965179f11aa0bf93b69

Use secure timer to generate S-EL1 interrupts ...

This patch adds support in the TSP to program the secure physical
generic timer to generate a EL-1 interrupt every half second. It also
adds support for maintaining the timer state across power management
operations. The TSPD ensures that S-EL1 can access the timer by
programming the SCR_EL3.ST bit.

This patch does not actually enable the timer. This will be done in a
subsequent patch once the complete framework for handling S-EL1
interrupts is in place.

Change-Id: I1b3985cfb50262f60824be3a51c6314ce90571bc

Add context library API to change a bit in SCR_EL3 ...

This patch adds an API to write to any bit in the SCR_EL3 member of
the 'cpu_context' structure of the current CPU for a specified
security state. This API will be used in subsequent patches which
introduce interrupt management in EL3 to specify the interrupt routing
model when execution is not in EL3.

It also renames the cm_set_el3_elr() function to cm_set_elr_el3()
which is more in line with the system register name being targeted by
the API.

Change-Id: I310fa7d8f827ad3f350325eca2fb28cb350a85ed

Rework 'state' field usage in per-cpu TSP context ...

This patch lays the foundation for using the per-cpu 'state' field in
the 'tsp_context' structure for other flags apart from the power state
of the TSP.

It allocates 2 bits for the power state, introduces the necessary
macros to manipulate the power state in the 'state' field and
accordingly reworks all use of the TSP_STATE_* states.

It also allocates a flag bit to determine if the TSP is handling a
standard SMC. If this flag is set then the TSP was interrupted due to
non-secure or EL3 interupt depending upon the chosen routing
model. Macros to get, set and clear this flag have been added as
well. This flag will be used by subsequent patches.

Change-Id: Ic6ee80bd5895812c83b35189cf2c3be70a9024a6

Rework BL3-1 unhandled exception handling and reporting ...

This patch implements the register reporting when unhandled exceptions are
taken in BL3-1. Unhandled exceptions will result in a dump of registers
to the console, before halting execution by that CPU. The Crash Stack,
previously called the Exception Stack, is used for this activity.
This stack is used to preserve the CPU context and runtime stack
contents for debugging and analysis.

This also introduces the per_cpu_ptr_cache, referenced by tpidr_el3,
to provide easy access to some of BL3-1 per-cpu data structures.
Initially, this is used to provide a pointer to the Crash stack.

panic() now prints the the error file and line number in Debug mode
and prints the PC value in release mode.

The Exception Stack is renamed to Crash Stack with this patch.
The original intention of exception stack is no longer valid
since we intend to support several valid exceptions like IRQ
and FIQ in the trusted firmware context. This stack is now
utilized for dumping and reporting the system state when a
crash happens and hence the rename.

Fixes ARM-software/tf-issues#79 Improve reporting of unhandled exception

Change-Id: I260791dc05536b78547412d147193cdccae7811a

Reduce deep nesting of header files ...

Reduce the number of header files included from other header
files as much as possible without splitting the files. Use forward
declarations where possible. This allows removal of some unnecessary
"#ifndef __ASSEMBLY__" statements.

Also, review the .c and .S files for which header files really need
including and reorder the #include statements alphabetically.

Fixes ARM-software/tf-issues#31

Change-Id: Iec92fb976334c77453e010b60bcf56f3be72bd3e

Always use named structs in header files ...

Add tag names to all unnamed structs in header files. This
allows forward declaration of structs, which is necessary to
reduce header file nesting (to be implemented in a subsequent
commit).

Also change the typedef names across the codebase to use the _t
suffix to be more conformant with the Linux coding style. The
coding style actually prefers us not to use typedefs at all but
this is considered a step too far for Trusted Firmware.

Also change the IO framework structs defintions to use typedef'd
structs to be consistent with the rest of the codebase.

Change-Id: I722b2c86fc0d92e4da3b15e5cab20373dd26786f

Separate out CASSERT macro into own header ...

Separate out the CASSERT macro out of bl_common.h into its own
header to allow more efficient header inclusion.

Change-Id: I291be0b6b8f9879645e839a8f0dd1ec9b3db9639

Remove vpath usage in makefiles ...

Remove all usage of the vpath keyword in makefiles as it was prone
to mistakes. Specify the relative paths to source files instead.

Also reorder source files in makefiles alphabetically.

Fixes ARM-software/tf-issues#121

Change-Id: Id15f60655444bae60e0e2165259efac71a50928b

Make use of user/system includes more consistent ...

Make codebase consistent in its use of #include "" syntax for
user includes and #include <> syntax for system includes.

Fixes ARM-software/tf-issues#65

Change-Id: If2f7c4885173b1fd05ac2cde5f1c8a07000c7a33

Move include and source files to logical locations ...

Move almost all system include files to a logical sub-directory
under ./include. The only remaining system include directories
not under ./include are specific to the platform. Move the
corresponding source files to match the include directory
structure.

Also remove pm.h as it is no longer used.

Change-Id: Ie5ea6368ec5fad459f3e8a802ad129135527f0b3

Place assembler functions in separate sections ...

This extends the --gc-sections behaviour to the many assembler
support functions in the firmware images by placing each function
into its own code section. This is achieved by creating a 'func'
macro used to declare each function label.

Fixes ARM-software/tf-issues#80

Change-Id: I301937b630add292d2dec6d2561a7fcfa6fec690

Fix build failure due to a typo in TSPD code ...

This patch fixes a build failure when TSPD support is included. The failure was
due to a missing semi-colon at the end of a C statement in tspd_common.c

Change-Id: I8fbd0d500bd9145b15f862b8686e570b80fcce8c

Fix build by correcting asm helper function usage in TSPD ...

This patch fixes a regression failure due to the use of functions by the 
TSPD code which access system registers with partially qualified names. 
These functions had been removed in an earlier patch. The relevant code 
has been updated to access these registers with their fully qualified 
names.

Fixes ARM-software/tf-issues#119

Change-Id: Ide1bc5036e1b8164a42f7b7fe86186ad860e0ef9

Implement standard calls for TSP ...

This patch adds call count, UID and version information SMC calls for
the Trusted OS, as specified by the SMC calling convention.

Change-Id: I9a3e84ac1bb046051db975d853dcbe9612aba6a9

Update Makefiles to get proper dependency checking working. ...

This change requires all platforms to now specify a list of source files
rather than object files.

New source files should preferably be specified by using the path as
well and we should add this in the future for all files so we can remove
use of vpath. This is desirable because vpath hides issues like the fact
that BL2 currently pulls in a BL1 file bl1/aarch64/early_exceptions.S
and if in the future we added bl2/aarch64/early_exceptions.S then it's
likely only one of the two version would be used for both bootloaders.

This change also removes the 'dump' build target and simply gets
bootloaders to always generate a dump file. At the same time the -x
option is added so the section headers and symbols table are listed.

Fixes ARM-software/tf-issues#11

Change-Id: Ie38f7be76fed95756c8576cf3f3ea3b7015a18dc
Signed-off-by: Jon Medhurst <tixy@linaro.org>

Implement late binding for runtime hooks ...

At present SPD power management hooks and BL3-2 entry are implemented
using weak references. This would have the handlers bound and registered
with the core framework at build time, but leaves them dangling if a
service fails to initialize at runtime.

This patch replaces implementation by requiring runtime handlers to
register power management and deferred initialization hooks with the
core framework at runtime. The runtime services are to register the
hooks only as the last step, after having all states successfully
initialized.

Change-Id: Ibe788a2a381ef39aec1d4af5ba02376e67269782

Rework arithmetic operations in Test Secure Payload ...

This patch reworks the service provided by the TSP to perform common
arithmetic operations on a set of arguments provided by the non-secure
world. For a addition, division, subtraction & multiplication operation
requested on two arguments in x0 and x1 the steps are:

1. TSPD saves the non-secure context and passes the operation and its
   arguments to the TSP.

2. TSP asks the TSPD to return the same arguments once again. This
   exercises an additional SMC path.

3. TSP now has two copies of both x0 and x1. It performs the operation
   on the corresponding copies i.e. in case of addition it returns x0+x0
   and x1+x1.

4. TSPD receives the result, saves the secure context, restores the
   non-secure context and passes the result back to the non-secure
   client.

Change-Id: I6eebfa2ae0a6f28b1d2e11a31f575c7a4b96724b
Co-authored-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Add power management support in the SPD ...

This patch implements a set of handlers in the SPD which are called by
the PSCI runtime service upon receiving a power management
operation. These handlers in turn pass control to the Secure Payload
image if required before returning control to PSCI. This ensures that
the Secure Payload has complete visibility of all power transitions in
the system and can prepare accordingly.

Change-Id: I2d1dba5629b7cf2d53999d39fe807dfcf3f62fe2

Add Test Secure Payload Dispatcher (TSPD) service ...

This patch adds the TSPD service which is responsible for managing
communication between the non-secure state and the Test Secure Payload
(TSP) executing in S-EL1.

The TSPD does the following:

1. Determines the location of the TSP (BL3-2) image and passes control
   to it for initialization. This is done by exporting the 'bl32_init()'
   function.

2. Receives a structure containing the various entry points into the TSP
   image as a response to being initialized. The TSPD uses this
   information to determine how the TSP should be entered depending on
   the type of operation.

3. Implements a synchronous mechanism for entering into and returning
   from the TSP image. This mechanism saves the current C runtime
   context on top of the current stack and jumps to the TSP through an
   ERET instruction. The TSP issues an SMC to indicate completion of the
   previous request. The TSPD restores the saved C runtime context and
   resumes TSP execution.

This patch also introduces a Make variable 'SPD' to choose the specific
SPD to include in the build. By default, no SPDs are included in the
build.

Change-Id: I124da5695cdc510999b859a1bf007f4d049e04f3
Co-authored-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>