16550: Use generic console_t data structure ...

Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.

Change-Id: I5c2fe3b6a667acf80c808cfec4a64059a2c9c25f
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

rockchip: move dt-coreboot uart distinction into param handling code ...

Rockchip platforms can be booted from either u-boot or coreboot.

So far the Coreboot-console was initizalized from a coreboot data struct
in the early_param2 callbacks and dt-based consoles with data from the
rockchip_get_uart_* functions.

But later code may also need this console information for example for
special suspend handling. To make this easy follow a suggestion from
Julius Werner and move the coreboot<->dt distinction into the
rockchip_get_uart_* functions, thus making correct data about the used
uart available to all Rockchip platform code at all times.

This includes a new rockchip_get_uart_clock as well, because while the
dt-platforms right now always just default the rate defined in a constant
Coreboot provides its own field for the clock rate and we don't want to
loose that information for the console init. Similarly the rk_uart_*
variables should move into the non-Coreboot code, to prevent them from
being marked as unused, which also requires the rk_get_uart_* functions
to move below the actual dt-parsing.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I278d595d2aa6c6864187fc8979a9fbff9814feac

rockchip: make uart baudrate configurable ...

A previous patch already allowed to configure the uart output from the
devicetree, but on Rockchip platforms we also have the issue of different
vendors using different baudrates for their uarts.

For example, rk3399 has a default baudrate of 115200 which is true for
ChromeOS-devices and boards from Theobroma-Systems, while all the boards
using the vendor boot chain actually use a baudrate of 1500000.

Similarly the newly added px30 has a default of said 1500000 but some
boards may want to use the more widely used 115200.

The devicetree stdout-path node already contains the desired baudrate,
so add simple code to parse it from there and override the default,
which stays unchanged.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I7412139c3df3073a1996eb508ec08642ec6af90d

plat/rockchip: Use new bl31_params_parse_helper() ...

The Rockchip platform is a prime candidate for switching to the new
bl31_params_parse_helper(), so switch it over. This will allow BL2
implementations on this platform to transparently switch over to the
version 2 parameter structure.

Change-Id: I540741d2425c93f66c8697ce749a351eb2b3a7e8
Signed-off-by: Julius Werner <jwerner@chromium.org>

plat/rockchip: Switch to use new common BL aux parameter library ...

This patch changes all Rockchip platforms to use the new common BL aux
parameter helpers. Since the parameter space is now cleanly split in
generic and vendor-specific parameters and the COREBOOT_TABLE
parameter is now generic, the parameter type number for that parameter
has to change. Since it only affects coreboot which always builds TF as
a submodule and includes its headers directly to get these constants,
this should not cause any issues. In general, after this point, we
should avoid changing already assigned parameter type numbers whenever
possible.

Change-Id: Ic99ddd1e91ff5e5fe212fa30c793a0b8394c9dad
Signed-off-by: Julius Werner <jwerner@chromium.org>

rockchip: Allow console device to be set by DTB. ...

Currently the compile-time constant PLAT_RK_UART_BASE defines
which UART is used as console device. E.g. on RK3399 it is set
to UART2. That means, that a single bl31 image can not be used
for two boards, which just differ on the UART console.

This patch addresses this limitation by parsing the "stdout-path"
property from the "chosen" node in the DTB. The expected property
string is expected to have the form "serialN:XXX", with
N being either 0, 1, 2, 3 or 4. When the property is found, it will
be used to override PLAT_RK_UART_BASE.

Tested on RK3399-Q7, with a stdout-path of "serial0:115200n8".

Signed-off-by: Christoph Müllner <christophm30@gmail.com>
Change-Id: Iafe1320e77ab006c121f8d52745d54cef68a48c7

rockchip: add common aarch32 support ...

There are a number or ARMv7 Rockchip SoCs that are very similar in their
bringup routines to the existing arm64 SoCs, so there is quite a high
commonality possible here.

Things like virtualization also need psci and hyp-mode and instead of
trying to cram this into bootloaders like u-boot, barebox or coreboot
(all used in the field), re-use the existing infrastructure in TF-A
for this (both Rockchip plat support and armv7 support in general).

So add core support for aarch32 Rockchip SoCs, with actual soc support
following in a separate patch.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I298453985b5d8434934fc0c742fda719e994ba0b