2017-01-18 |
Move BL_COHERENT_RAM_BASE/END defines to common_def.h
...
We have lots of duplicated defines (and comment blocks too).
Move them to include/plat/common/common_def.h.
While we are here, suffix the end address with _END instead of
_LIMIT. The _END is a better fit to indicate the linker-derived
real end address.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 18 Jan 2017
|
2017-01-12 |
utils: move BIT(n) macro to utils.h
...
We are duplicating this macro define, and it is useful enough
to be placed in the common place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 12 Jan 2017
|
2016-12-14 |
Fix incorrect copyright notices
...
Some files have incorrect copyright notices, this patch fixes all
files with deviations from the standard notice.
Change-Id: I66b73e78a50a235acb55f1e2ec2052a42c0570d2
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 14 Dec 2016
|
2016-10-26 |
Merge pull request #724 from rockchip-linux/support-rk3399-sdram
...
rockchip: optimize the link mechanism for SRAM code
davidcunado-arm
authored
on 26 Oct 2016
GitHub
committed
on 26 Oct 2016
|
2016-10-24 |
rockchip: fix A72 L2CTLR_DATA_RAM_LATENCY to 5
...
The default value of L2CTLR_DATA_RAM_LATENCY is 2, depends to
the test result on rk3399, the A72 will need lower voltage for
high frequency if it's set to be 5, and almost no effect on performance.
Change-Id: I99a6a43edcc0c58f7775c10f4b85669dc3eff66d
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Caesar Wang
committed
on 24 Oct 2016
|
rockchip: clear the power mode status via M0
...
Due to the PMU design, the PMU may not clear the WAKEUP bit after
wakeup, therefore, the state machine at the power mode may enter
the infinite loop during WFI.
There is a solution that we can use the M0 to monitor the WAKEUP
bit and clear it during power mode, then the state machine will be
recovered immediately. Then, the DUT can exit the WFI normally.
Change-Id: I303628553b728c214bf2d436bd3122032b5e669c
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Caesar Wang
committed
on 24 Oct 2016
|
rockchip: optimize the link mechanism for SRAM code
...
Add the common extra.ld.S and customized rk3399.ld.S to extend
to more features for different platforms.
For example, we can add SRAM section and specific address to
load there if we need it, and the common bl31.ld.S not need to
be modified.
Therefore, we can remove the unused codes which copying explicitly
from the function pmusram_prepare(). It looks like more clear.
Change-Id: Ibffa2da5e8e3d1d2fca80085ebb296ceb967fce8
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Caesar Wang
committed
on 24 Oct 2016
|
2016-09-14 |
Merge pull request #700 from rockchip-linux/fixes-typo-and-warnings
...
rockchip: Fixes typo and warnings
davidcunado-arm
authored
on 14 Sep 2016
GitHub
committed
on 14 Sep 2016
|
2016-09-09 |
rockchip: fixes some typo
...
As the checkpatch reports the warning or error.
plat/rockchip/common/plat_pm.c:96:
ERROR: do not set execute permissions for source files
plat/rockchip/rk3399/drivers/pmu/pmu.c:294:
ERROR: do not set execute permissions for source files
plat/rockchip/common/plat_pm.c:286: WARNING: line over 80 characters
plat/rockchip/common/plat_pm.c:287: WARNING: line over 80 characters
Change-Id: Ib347da21c56551c31df3f90f03777b13c75d5c26
Caesar Wang
committed
on 9 Sep 2016
|
rockchip: set gpio2 ~ gpio4 to input and pull none mode
...
For save power cosumption, if gpio power supply shut down, we need to
set gpio2 ~ gpio4 to input and HiZ status when suspend, and recovery
they status when rusume. we do it base on apio pass from loader.
Change-Id: I59fd2395e5e37e63425472a39f519822c9197e4c
Caesar Wang
committed
on 9 Sep 2016
|
rockchip: support disable/enable specific gpio when suspend/resume
...
some specific board need to disable/enable specific gpio when
suspend/resume, so we add this function, bootloader can pass the
specific gpio, and we can handle these gpios in bl31 suspend/resuem
function.
Change-Id: I373b03ef9202ee4a05a2b9caacdfa01b47ee2177
Caesar Wang
committed
on 9 Sep 2016
|
2016-09-08 |
rockchip: fix the scu idle for rk3399
...
As rk3399 reported the d8/octane scores drop 10% with cpu idle.
The root cause is thc cpu cluster enter the slow mode.
We don't need switch the clock to 24MHz if cpu cluster enter the
retention mode. In order to improve performance, it just needs for
cluster enter powering off mode.
Also, we shouldn't do anything for hlvl if the system is off.
Change-Id: I2a02962a01343abd0cba47ed63192c1cdf88b119
Tony Xie
authored
on 2 Sep 2016
Caesar Wang
committed
on 8 Sep 2016
|
2016-08-25 |
rockchip: handle some interrupt before enter power mode for rk3399
...
For the PMU design, we don't expect to get the interrupts before enter
the power mode. Since that will cause the confusion for the state
machine in the power mode.
Change-Id: Id8dee79ae617a66271b5caf92caf35f520f45099
Caesar Wang
committed
on 25 Aug 2016
|
2016-08-11 |
rockchip: fix the power up/dowm cnt for rk3399
...
Sometimes this will cause the long delay for suspend/resume.
Since the 24M OCS will be turned off in power mode.
Also, remove the ERROR_DEPRECATED config define.
Change-Id: I78f21c35912c2250972e551695cdacc7bc4c020a
Caesar Wang
committed
on 11 Aug 2016
|
2016-07-27 |
rockchip: fixes typo and some bugs for suspend/resume tests
...
1. Remove the AP_PWROFF in ATF, should configure it in kernel.
2. Save and restore the PWMs pin/regs for suspend/resume.
3. The pmusgrf reset-hold bits needs to be released. since the
pmusgrf reset-hold bits needs to be held.
4. Configure the PMU power up/down cycles about delay 3ms.
5. With the MMIO register block as one big mapping.
6. Fix the build error with psci_entrypoint since PSCI lib updated.
Fixes the commit
9ec78bd ("rockchip: support the suspend/resume for rk3399").
Change-Id: I112806700bf433c87763aac23d22fa7e6a7f5264
Caesar Wang
committed
on 27 Jul 2016
|
2016-07-18 |
Merge pull request #654 from rockchip-linux/rk3399-suspend-resume
...
rockchip: support the suspend/resume for rk3399
danh-arm
authored
on 18 Jul 2016
GitHub
committed
on 18 Jul 2016
|
Merge pull request #653 from rockchip-linux/support-rockchip-sip-runtime-service
...
rockchip: support plat SIP runtime service for rk3399
danh-arm
authored
on 18 Jul 2016
GitHub
committed
on 18 Jul 2016
|
rockchip: support the suspend/resume for rk3399
...
1.Fixes the suspend/resume some bugs.
2.Add the power domain for saving power consumption.
3.Add cpu clusters suspend for rk3399 SoCs
Change-Id: Id602779016b41d6281f4ba40a20229d909b28e46
Tony Xie
authored
on 15 Jul 2016
Caesar Wang
committed
on 18 Jul 2016
|
rockchip: support plat SIP runtime service
...
Software executing in the normal world and in the trusted world at
exception levels lower than EL3 will request runtime services using the
SMC instruction.
See the documentation here:
https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/
rt-svc-writers-guide.md
This to be implemented as an EL3 Runtime Service in rockchip BL31
platform port, using the "SiP Service Call" range as specified in the
SMC Calling Convention.
This doesn't support any SMC yet, we will support it in later.
Change-Id: I0a638dd0b653c28b08f79d89f77ed7c69864017d
Caesar Wang
committed
on 18 Jul 2016
|
2016-07-08 |
Introduce utils.h header file
...
This patch introduces a new header file: include/lib/utils.h.
Its purpose is to provide generic macros and helper functions that
are independent of any BL image, architecture, platform and even
not specific to Trusted Firmware.
For now, it contains only 2 macros: ARRAY_SIZE() and
IS_POWER_OF_TWO(). These were previously defined in bl_common.h and
xlat_tables.c respectively.
bl_common.h includes utils.h to retain compatibility for platforms
that relied on bl_common.h for the ARRAY_SIZE() macro. Upstream
platform ports that use this macro have been updated to include
utils.h.
Change-Id: I960450f54134f25d1710bfbdc4184f12c049a9a9
Sandrine Bailleux
committed
on 8 Jul 2016
|
2016-05-26 |
rockchip: support system off function for rk3399
...
if define power off gpio, BL31 will do system power off through
gpio control.
Caesar Wang
committed
on 26 May 2016
|
rockchip: add reset or power off gpio configuration for rk3399
...
We add plat parameter structs to support BL2 to pass variable-length,
variable-type parameters to BL31. The parameters are structured as a
link list. During bl31 setup time, we travse the list to process each
parameter. throuth this way, we can get the reset or power off gpio
parameter, and do hardware control in BL31. This structure also can
pass other parameter to BL31 in future.
Caesar Wang
committed
on 26 May 2016
|
rockchip: support rk3399 gpio driver
...
There are 5 groups of GPIO (GPIO0~GPIO4), totally have 122 GPIOs
on rk3399 platform.
The pull direction(pullup or pulldown) for all of GPIOs are
software-programmable.
At the moment, we add the gpio basic driver since reset or power off
the devices from gpio configuration for BL31.
Caesar Wang
committed
on 26 May 2016
|
2016-05-20 |
Replace Rockchip delay timer by generic one
...
Use the generic delay timer instead of having a specific platform
file for configuring it.
Change-Id: Ifa68b9c97cd96ae1190cee74d22d729af95e4537
Antonio Nino Diaz
committed
on 20 May 2016
|
Implement plat_get_syscnt_freq2 on platforms
...
Replaced plat_get_syscnt_freq by plat_get_syscnt_freq2 on all
upstream platforms.
Change-Id: I3248f3f65a16dc5e9720012a05c35b9e3ba6abbe
Antonio Nino Diaz
committed
on 20 May 2016
|
2016-05-04 |
rockchip: support the suspend/resume for rk3399
...
This patch adds to support the suspend/resume for rk3399 SoCs.
Signed-off-by: Shengfei xu <xsf@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Caesar Wang
committed
on 4 May 2016
|
2016-04-21 |
Move `plat_get_syscnt_freq()` to arm_common.c
...
This patch moves the definition for `plat_get_syscnt_freq()`
from arm_bl31_setup.c to arm_common.c. This could be useful
in case a delay timer needs to be installed based on the
generic timer in other BLs.
This patch also modifies the return type for this function
from `uint64_t` to `unsigned long long` within ARM and other
platform files.
Change-Id: Iccdfa811948e660d4fdcaae60ad1d700e4eda80d
Yatharth Kochar
committed
on 21 Apr 2016
|
2016-04-14 |
Dump platform-defined regs in crash reporting
...
It is up to the platform to implement the new plat_crash_print_regs macro to
report all relevant platform registers helpful for troubleshooting.
plat_crash_print_regs merges or calls previously defined plat_print_gic_regs
and plat_print_interconnect_regs macros for each existing platforms.
NOTE: THIS COMMIT REQUIRES ALL PLATFORMS THAT ENABLE THE `CRASH_REPORTING`
BUILD FLAG TO MIGRATE TO USE THE NEW `plat_crash_print_regs()` MACRO. BY
DEFAULT, `CRASH_REPORTING` IS ENABLED IN DEBUG BUILDS FOR ALL PLATFORMS.
Fixes: arm-software/tf-issues#373
Signed-off-by: Gerald Lejeune <gerald.lejeune@st.com>
Gerald Lejeune
committed
on 14 Apr 2016
|
2016-04-04 |
Support for Rockchip's family SoCs
...
This patch adds to support the RK3368 and RK3399 SoCs.
RK3368/RK3399 is one of the Rockchip family SoCs, which is an
multi-cores ARM SoCs.
This patch adds support to boot the Trusted Firmware on RK3368/RK3399
SoCs, and adds support to boot secondary CPUs, enter/exit core
power states for all CPUs in the slow/fast clusters.
This is the initial version for rockchip SoCs.(RK3368/RK3399 and next SoCs)
* Support arm gicv2 & gicv3.
* Boot up multi-cores CPU.
* Add generic CPU helper functions.
* Support suspend/resume.
* Add system_off & system_reset implementation.
* Add delay timer platform implementation.
* Support the new porting interface for the PSCI implementation.
Change-Id: I704bb3532d65e8c70dbd99b512c5e6e440ea6f43
Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Shengfei xu <xsf@rock-chips.com>
Tony Xie
authored
on 15 Jan 2016
Caesar Wang
committed
on 4 Apr 2016
|