rockchip: Unify Platform specific defines for PSCI module ...

PLATFORM_CORE_COUNT - Unsigned int
PLATFORM_CLUSTER_COUNT - Unsigned int
PLATFORM_MAX_CPUS_PER_CLUSTER - Unsigned int
PLATFORM_CORE_COUNT_PER_CLUSTER - Unsigned int

Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I624c15d569db477506a74964bc828e1a932181d4

rockchip: make miniloader ddr_parameter handling optional ...

Transfering the regions of ddr memory to additionally protect is very much
specific to some rockchip internal first stage bootloader and doesn't get
used in either mainline uboot or even Rockchip's published vendor uboot
sources.

This results in a big error
    ERROR:   over or zero region, nr=0, max=10
getting emitted on every boot for most users and such a message coming
from early firmware might actually confuse developers working with the
system.

As this mechanism seems to be only be used by Rockchip's internal miniloader
hide it behind a build conditional, so it doesn't confuse people too much.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Change-Id: I52c02decc60fd431ea78c7486cad5bac82bdbfbe

rockchip: px30: cleanup securing of ddr regions ...

So far the px30-related ddr security was loading data for regions to secure
from a pre-specified memory location and also setting region0 to secure
the first megabyte of memory in hard-coded setting (top=0, end=0, meaning
1MB).

To make things more explicit and easier to read add a function doing
the settings for specified memory areas, like other socs have and also
add an assert to make sure any descriptor read from memory does not
overlap the TZRAM security in region0 and TEE security in region1.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Change-Id: I78441875112bf66a62fde5f1789f4e52a78ef95f

rockchip: px30: move secure init to separate file ...

Similar to others like rk3399 and rk3288 move the secure init to a
separate file to unclutter the soc init a bit.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Change-Id: Iebb38e24f1c7fe5353f139c896fb8ca769bf9691

rockchip: bring TZRAM_SIZE values in line ...

The agreed upon division of early boot locations is 0x40000 for bl31
to leave enough room for u-boot-spl and 0x100000 for bl33 (u-boot).

rk3288 and rk3399 already correctly secure the ddr up to the 1MB boundary
so pull the other platforms along to also give the Rockchip TF-A enough
room to comfortably live in.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Change-Id: Ie9e0c927d3074a418b6fd23b599d2ed7c15c8c6f

rockchip: px30: Add support for UART3 as serial output ...

Add the UART3 base definition for serial output, which is used on some
PX30 SoM boards.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Change-Id: I8490b15c9f129a33c01cb78bd78675014bc7b015

rockchip: Update BL31_BASE to 0x40000 ...

Rockchip platform is using the first 1MB of DRAM as secure ram space,
and there is a vendor loader who loads and runs the BL31/BL32/BL33,
this loader is usually load by SoC BootRom to the start addres of DRAM,
we need to reserve enough space for this loader so that it doesn't need
to do the relocate when loading the BL31. eg.
We use U-Boot SPL to load ATF BL31 and U-Boot proper as BL33, the SPL
TEXT BASE is offset 0 of DRAM which is decide by Bootrom; if we update
the BL31_BASE to offset 0x40000(256KB), then the 0~0x40000 should be
enough for SPL and no need to do the relocate while the space size
0x10000(64KB) may not enough for SPL.
After this update, the BL31 can use the rest 768KB of the first 1MB,
which is also enough, and the loader who is using BL31 elf file can
support this update without any change.

Change-Id: I66dc685594d77f10f9a49c3be015fd6729250ece
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

rockchip: Fix typo for TF content text ...

The 'txet' should be 'text'.

Change-Id: I2217a1adf50c3b86f3087b83c77d9291b280627c
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

rockchip: px30: add uart5 as option for serial output ...

The px30 mini-evb can use either uart2 (muxed with the sd-card pins) or
uart5 via its pin header for serial output. Uart5 is especially useful
when needing to boot from the sd-card, where uart2 obviously is not
useable.

So add the uart5 constants and it as uart option for the serial-param
handler.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: Ib88df7a55d761ee104d312c9953a13de3beba1c4

rockchip: px30: Use new bl31_params_parse functions ...

This change is needed for the platform to compile following the changes
made in commits cbdc72b559ab and 3e02c7436cf4.

Change-Id: I3468dd27f3b4f3095fb82f445d51cd8714311eb7
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

rockchip: px30: Fix build error ...

"result of '1 << 31' requires 33 bits to represent, but 'int' only has
32 bits [-Werror=shift-overflow=]"

This is treated as an error since commit 93c690eba8ca ("Enable
-Wshift-overflow=2 to check for undefined shift behavior")

Only the actual errors are being tackled by this patch. It is up to the
platform to choose whether there needs to be further modifications to
the code.

Change-Id: I70860ae5f2a34d7c684bd491b76da50aa04f778e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

rockchip: px30: support px30 ...

px30 is a Quad-core soc and Cortex-a53 inside.
This patch supports the following functions:
1. basic platform setup
2. power up/off cpus
3. suspend/resume cpus
4. suspend/resume system
5. reset system
6. power off system

Change-Id: I73d55aa978096c078242be921abe0ddca9e8f67e
Signed-off-by: XiaoDong Huang <derrick.huang@rock-chips.com>