uniphier: increase BL33 max size and GZIP temporary buffer size ...

The current BL33 size is large enough for U-Boot, but we need to
increase the limit to use other boot loaders such as edk2.

Increase the buffer size used for GZIP decompression too.

 BL33 max size (UNIPHIER_BL33_MAX_SIZE):  1MB -> 8MB
 GZIP buffer (UNIPHIER_IMAGE_BUF_SIZE):   1MB -> 8MB

Increasing the block buffer size (UNIPHIER_BLOCK_BUF_SIZE) is not
required, but I increased it too to make it work more efficiently.

Change-Id: I4fa6d795bed9ab9ada7f8f616c7d47076139e3a8
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

xlat_tables_v2: add base table section name parameter for spm_mm ...

Core spm_mm code expects the translation tables are located in the
inner & outer WBWA & shareable memory.
REGISTER_XLAT_CONTEXT2 macro is used to specify the translation
table section in spm_mm.

In the commit 363830df1c28e (xlat_tables_v2: merge
REGISTER_XLAT_CONTEXT_{FULL_SPEC,RO_BASE_TABLE}), REGISTER_XLAT_CONTEXT2
macro explicitly specifies the base xlat table goes into .bss by default.
This change affects the existing SynQuacer spm_mm implementation.
plat/socionext/synquacer/include/plat.ld.S linker script intends to
locate ".bss.sp_base_xlat_table" into "sp_xlat_table" section,
but this implementation is no longer available.

This patch adds the base table section name parameter for
REGISTER_XLAT_CONTEXT2 so that platform can specify the
inner & outer WBWA & shareable memory for spm_mm base xlat table.
If PLAT_SP_IMAGE_BASE_XLAT_SECTION_NAME is not defined, base xlat table
goes into .bss by default, the result is same as before.

Change-Id: Ie0e1a235e5bd4288dc376f582d6c44c5df6d31b2
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>

Cleanup the code for TBBR CoT descriptors ...

CoT used for BL1 and BL2 are moved to tbbr_cot_bl1.c
and tbbr_cot_bl2.c respectively.
Common CoT used across BL1 and BL2 are moved to
tbbr_cot_common.c.

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I2252ac8a6960b3431bcaafdb3ea4fb2d01b79cf5

uniphier: define PLAT_XLAT_TABLES_DYNAMIC only for BL2 ...

This is not used in BL31 or Bl32 for this platform.

Pass it to BL2_CPPFLAGS instead of defining it for all BL images.

This will produce slightly smaller BL31 and Bl32.

Change-Id: I66ec5179f8dc5b112e65547335e7dd0a0f4074cd
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

plat: remove redundant =1 from -D option ...

As GCC manual says, -D option defines a macro as 1, if =<value> is omitted.

  -D <name>
      Predefine <name> as a macro, with definition 1.

The same applied with Clang, too.

In the context of -D option, =1 is always redundant.

Change-Id: I487489a1ea3eb51e734741619c1e65dab1420bc4
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Pass more -D options to BL*_CPPFLAGS instead of BL*_CFLAGS ...

Commit d5e97a1d2c79 ("Build: define IMAGE_AT_EL1 or IMAGE_AT_EL3
globally for C files") does not have commit 848a7e8ce1d9 ("Build:
introduce per-BL CPPFLAGS and ASFLAGS") as an ancestor because
they were pulled almost at the same time.

This is a follow-up conversion to be consistent with commit
11a3c5ee7325 ("plat: pass -D option to BL*_CPPFLAGS instead of
BL*_CFLAGS").

With this change, the command line option, IMAGE_AT_EL3, will be
passed to .S files as well.

I remove the definition in include/lib/cpus/aarch64/cpu_macros.S

Otherwise, the following error would happen.

  include/lib/cpus/aarch64/cpu_macros.S:29:0: error: "IMAGE_AT_EL3" redefined [-Werror]

Change-Id: I943c8f22356483c2ae3c57b515c69243a8fa6889
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

uniphier: support read-only xlat tables ...

BL2 for this platform uses mmap_add_dynamic_region(), but BL31 and
BL32 (TSP) only use static mapping. So, BL31 and BL32 can make the
tables read-only after enabling MMU.

Enable ALLOW_RO_XLAT_TABLES by default.

Change-Id: Ib59c44697163629119888bb6abd47fa144f09ba3
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

uniphier: use enable_mmu() in common function ...

Currently, enable_mmu_el1() or enable_mmu_el3() is kept outside the
common function because the appropriate one must be chosen.

Use enable_mmu() and move it to the common function.

Change-Id: If2fb651691a7b6be05674f5cf730ae067ba95d4b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

TF-A GICv3 driver: Introduce makefile ...

This patch moves all GICv3 driver files into new added
'gicv3.mk' makefile for the benefit of the generic driver
which can evolve in the future without affecting platforms.
The patch adds GICv3 driver configuration flags
'GICV3_IMPL', 'GICV3_IMPL_GIC600_MULTICHIP' and
'GICV3_OVERRIDE_DISTIF_PWR_OPS' described in
'GICv3 driver options' section of 'build-option.rst'
document.

NOTE: Platforms with GICv3 driver need to be modified to
include 'drivers/arm/gic/v3/gicv3.mk' in their makefiles.

Change-Id: If055f6770ff20f5dee5a3c99ae7ced7cdcac5c44
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

TF-A GICv3 driver: Separate GICD and GICR accessor functions ...

This patch provides separation of GICD, GICR accessor
functions and adds new macros for GICv3 registers access
as a preparation for GICv3.1 and GICv4 support.
NOTE: Platforms need to modify to include both
'gicdv3_helpers.c' and 'gicrv3_helpers.c' instead of the
single helper file previously.

Change-Id: I1641bd6d217d6eb7d1228be3c4177b2d556da60a
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

uniphier: shrink UNIPHIER_ROM_REGION_SIZE ...

Currently, the ROM region is needlessly too large.

The on-chip SRAM region of the next SoC will start from 0x04000000,
and this will cause the region overlap.

Mapping 0x04000000 for the ROM is enough.

Change-Id: I85ce0bb1120ebff2e3bc7fd13dc0fd15dfff5ff6
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

uniphier: prepare uniphier_soc_info() for next SoC ...

The revision register address will be changed in the next SoC.

The LSI revision is needed in order to know where the revision
register is located, but you need to read out the revision
register for that. This is impossible.

We need to know the revision register address by other means.
Use BL_CODE_BASE, where the base address of the TF image that is
currently running. If it is bigger than 0x80000000 (i.e. the DRAM
base is 0x80000000), we assume it is a legacy SoC.

Change-Id: I9d7f4325fe2085a8a1ab5310025e5948da611256
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Merge changes from topic "console_t_cleanup" into integration ...

* changes:
  marvell: Consolidate console register calls
  uniphier: Use generic console_t data structure
  spe: Use generic console_t data structure
  LS 16550: Use generic console_t data structure
  stm32: Use generic console_t data structure
  rcar: Use generic console_t data structure
  a3700: Use generic console_t data structure
  16550: Use generic console_t data structure
  imx: Use generic console_t data structure

Merge "pl011: Use generic console_t data structure" into integration

Merge "uniphier: make on-chip SRAM region configurable" into integration

pl011: Use generic console_t data structure ...

Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.

Change-Id: I7a23327394d142af4b293ea7ccd90b843c54587c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

uniphier: Use generic console_t data structure ...

Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.

Change-Id: Ia9d996bb45ff3a7f1b240f12fd75805b48a048e9
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Merge changes from topic "uniphier" into integration ...

* changes:
  uniphier: make I/O register region configurable
  uniphier: make PSCI related base address configurable
  uniphier: make counter control base address configurable
  uniphier: make UART base address configurable
  uniphier: make pinmon base address configurable
  uniphier: make NAND controller base address configurable
  uniphier: make eMMC controller base address configurable

Merge changes from topic "uniphier" into integration ...

* changes:
  uniphier: extend boot device detection for future SoCs
  uniphier: change block_addressing flag to bool
  uniphier: change the return value type of .is_usb_boot() to bool

uniphier: make on-chip SRAM region configurable ...

The on-chip SRAM region will be changed in the next SoC. Make it
configurable. Also, split the mmap code into a new helper function
so that it can be re-used for another boot mode.

Change-Id: I89f40432bf852a58ebc9be5d9dec4136b8dc010b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

uniphier: make I/O register region configurable ...

The I/O register region will be changed in the next SoC. Make it
configurable.

Change-Id: Iec0cbd1ef2d0703ebc7c3d3082edd73791bbfec9
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

uniphier: extend boot device detection for future SoCs ...

The next SoC will have:
  - No boot swap
  - SD boot
  - No USB boot

Add new fields to handle this.

Change-Id: I772395f2c5dfc612e575b0cbd0657a5fa9611c25
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

uniphier: make PSCI related base address configurable ...

The register base address will be changed in the next SoC. Make it
configurable.

Change-Id: Ibe07bd9db128b0f7e629916cb6ae21ba7984eca9
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

uniphier: change block_addressing flag to bool ...

The flag, uniphier_emmc_block_addressing, is boolean logic, so
"bool' is more suitable.

uniphier_emmc_is_over_2gb() is not boolean - it returns 1 / 0
depending on the card density, or a negative value on failure.
Rename it to make it less confusing.

Change-Id: Ia646b1929147b644e0df07c46b54ab80548bc3bd
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

uniphier: make counter control base address configurable ...

The register base will be changed in the next SoC. Make it
configurable.

Change-Id: I4a7cf85fe50e4d71db58a3372a71774e43193bd3
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

uniphier: change the return value type of .is_usb_boot() to bool ...

This is boolean logic, so "bool" is more suitable.

Change-Id: I439c5099770600a65b8f58390a4c621c2ee487a5
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

uniphier: make UART base address configurable ...

The next SoC supports the same UART, but the register base will be
changed. Make it configurable.

Change-Id: Ida5c9151b2f3554afd15555b22838437eef443f7
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

uniphier: make pinmon base address configurable ...

The register base will be changed in the next SoC. Make it
configurable.

Change-Id: I9fbb6bdd1cf06207618742d4ad7970d911c9bc26
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

uniphier: make NAND controller base address configurable ...

The next SoC does not support the NAND controller, but make the base
address configurable for consistency and future proof.

Change-Id: I776e43ff2b0408577919b0b72849c3e1e5ce0758
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

uniphier: make eMMC controller base address configurable ...

The next SoC supports the same eMMC controller, but the register
base will be changed. Make it configurable.

Change-Id: I00cb5531bc3d8d49357ad5e922cdd3d785355edf
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>