Currently, enable_mmu_el1() or enable_mmu_el3() is kept outside the
common function because the appropriate one must be chosen.

Use enable_mmu() and move it to the common function.

Change-Id: If2fb651691a7b6be05674f5cf730ae067ba95d4b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The I/O register region will be changed in the next SoC. Make it
configurable.

Change-Id: Iec0cbd1ef2d0703ebc7c3d3082edd73791bbfec9
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The register base address will be changed in the next SoC. Make it
configurable.

Change-Id: Ibe07bd9db128b0f7e629916cb6ae21ba7984eca9
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The register base will be changed in the next SoC. Make it
configurable.

Change-Id: I4a7cf85fe50e4d71db58a3372a71774e43193bd3
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The next SoC supports the same UART, but the register base will be
changed. Make it configurable.

Change-Id: Ida5c9151b2f3554afd15555b22838437eef443f7
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

BL2_BASE, BL31_BASE, and BL32_BASE are defined in platform_def.h,
that is, determined at link-time.

On the other hand, BL2_END, BL31_END, and BL32_END are derived from
the symbols produced by the linker scripts. So, they are fixed-up
at run-time if ENABLE_PIE is enabled.

To make it work in a position-indepenent manner, use BL_CODE_BASE and
BL_END, both of which are relocatable.

Change-Id: Ic179a7c60eb64c5f3024b178690b3ac7cbd7521b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Fix the typo "warn" -> "warm".

Also fix the following checkpatch.pl warnings:

  CHECK: Prefer using the BIT macro
  CHECK: No space is necessary after a cast
  CHECK: Alignment should match open parenthesis
  CHECK: Unnecessary parentheses around uniphier_io_policies[image_id].dev_handle

Change-Id: Ic11eea2668c4bf2d1e8f089e6338ba7b7156d80b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The legacy console is gone. Re-add the console support based on the
multi-console framework.

I am still keeping the putc, getc, and flush callbacks in
uniphier_console.S to use plat/common/aarch64/crash_console_helpers.S

The console registration code already relies on that C environment
has been set up. So, I just filled the struct console fields with the
callback pointers, then called console_register() directly. I also
re-implemented the init function in C to improve the readability.

Removing the custom crash console implementation has one disadvantage;
we cannot use the crash console on very early crashes because
crash_console_helpers.S works only after the console is registered.
I can live with this limitation.

Tested on my boards, and confirmed this worked like before.

Change-Id: Ieab9c849853ff6c525c15ea894a85944f257db59
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

- Remove references to removed build options.
- Migrate to bl31_early_platform_setup2().

Change-Id: I9242c4d02a36e385bf0bf8ee56287106030153d1
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: I5993b425445ee794e6d2a792c244c0af53640655
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Initial commit for Socionext UniPhier SoC support.  BL1, Bl2, and
BL31 are supported.  Refer to docs/plat/socionext-uniphier.md for
more detais.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>