ti: k3: common: Add basic PSCI core off support ...

Use TI-SCI messages to request core power down from system controller
firmware.

Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: common: Add basic PSCI reset support ...

Use TI-SCI messages to request reset from system controller firmware.

Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: common: Add basic PSCI core on support ...

Use TI-SCI messages to request core start from system controller
firmware.

Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: drivers: ti_sci: Add support for Processor control ...

TI-SCI message protocol provides support for controlling of various
physical cores available in the SoC. In order to control which host is
capable of controlling a physical processor core, there is a processor
access control list that needs to be populated as part of the board
configuration data.

Introduce support for the set of TI-SCI message protocol APIs that
provide us with this capability of controlling physical cores.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>

ti: k3: drivers: ti_sci: Add support for Core control ...

Since system controller now has control over SoC power management, core
operation such as reset need to be explicitly requested to reboot the SoC.
Add support for this here.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>

ti: k3: drivers: ti_sci: Add support for Clock control ...

TI-SCI message protocol provides support for management of various
hardware entities within the SoC.

In general, we expect to function at a device level of abstraction,
however, for proper operation of hardware blocks, many clocks directly
supplying the hardware block needs to be queried or configured.

Introduce support for the set of TI-SCI message protocol support that
provide us with this capability.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>

ti: k3: drivers: ti_sci: Add support for Device control ...

TI-SCI message protocol provides support for management of various
hardware entitites within the SoC.

We introduce the fundamental device management capability support to
the driver protocol as part of this change.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>

ti: k3: drivers: Add support for TI System Control Interface protocol ...

Texas Instrument's System Control Interface (TI-SCI) Message Protocol
is used in Texas Instrument's System on Chip (SoC) such as those
in K3 family AM654x SoCs to communicate between various compute
processors with a central system controller entity.

TI-SCI message protocol provides support for management of various
hardware entities within the SoC. Add support driver to allow
communication with system controller entity within the SoC.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>

ti: k3: drivers: Add Secure Proxy driver ...

Secure Proxy module manages hardware threads that are meant
for communication between the processor entities. Add support
for this here.

Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: common: Only enable caches early ...

We can enter and exit coherency without any software operations,
but HW_ASSISTED_COHERENCY has stronger implications that are
causing issues. Until these can be resolved, only use the weaker
WARMBOOT_ENABLE_DCACHE_EARLY flag.

Signed-off-by: Andrew F. Davis <afd@ti.com>

Merge pull request #1486 from antonio-nino-diaz-arm/an/psci-misra ...

Fix several MISRA defects in PSCI library

Rework page table setup for varying number of mem regions ...

Change arm_setup_page_tables() to take a variable number of memory
regions. Remove coherent memory region from BL1, BL2 and BL2U as
their coherent memory region doesn't contain anything and
therefore has a size of 0. Add check to ensure this
doesn't change without us knowing.

Change-Id: I790054e3b20b056dda1043a4a67bd7ac2d6a3bc0
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>

PSCI: Fix types of definitions ...

Also change header guards to fix defects of MISRA C-2012 Rule 21.1.

Change-Id: Ied0d4b0e557ef6119ab669d106d2ac5d99620c57
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

ti: k3: common: Enable interrupts before entering standby state ...

To wake a core from wfi interrupts must be enabled, in some cases they
may not be and so we can lock up here. Unconditionally enable interrupts
before wfi and then restore interrupt state.

Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: common: Add root domain node to platform topology ...

Actions may need to be taken by the last core when all clusters
have been shutdown. Add a top level root domain node to coordinate
this between clusters.

Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: Introduce basic generic board support ...

While it would be useful to have a device tree based build, the
required components are not in place yet, so support just a simple
statically defined configuration to begin with.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: common: Add PSCI stubs ...

These functions are used for the PSCI implementation and are needed to
build BL31, but we cannot implement them until we add several more drivers
related to ti-sci so these are only stubs for now.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benjamin Fair <b-fair@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: common: Enable GICv3 support ...

Do proper initialization of GIC V3. This will allow CP15 access to GIC
from "normal world" (aka HLOS) via mrc/mcr calls.

K3 SoC family uses GICv3 compliant GIC500 without compatibility for
legacy GICv2.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benjamin Fair <b-fair@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: common: Program A53 arch timer frequency ...

Provide K3_TIMER_FREQUENCY for the platform configuration if the GTC
clock is selected statically and override option if the platform has a
different configuration.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benjamin Fair <b-fair@ti.com>

ti: k3: common: Add console initialization base ...

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benjamin Fair <b-fair@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: common: Enable MMU using xlat_tables_v2 library ...

This library will be used to properly set up mappings from different
bootloaders at different exception levels. It ensures that memory mapped
devices such as UARTs are still accessible and memory regions have the
correct access permissions.

Signed-off-by: Benjamin Fair <b-fair@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: common: Implement topology functions ...

These functions describe the layout of the cores and clusters in order to
support the PSCI framework.

Signed-off-by: Benjamin Fair <b-fair@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: common: Populate BL32 and BL33 entrypoint ...

Because there is no BL2, BL31 must determine the entrypoint and memory
location of BL32 and BL33 on its own.

BL32_BASE and PRELOADED_BL33_BASE will be set in the corresponding board
makefile. We also allow a DTB address to be specified for cases when BL33
is a Linux image.

NOTE: It is possible to pull in this information from device tree as
well, however libfdt does not contain the required hooks to make this
happen at this point in time.

Signed-off-by: Benjamin Fair <b-fair@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: common: Add platform core management helpers ...

The K3 family of SoCs has multiple interconnects. The key interconnect
for high performance processors is the MSMC3 interconnect. This is
an io-coherent interconnect which exports multiple ports for each
processor cluster.

Sometimes, port 0 of the MSMC may not have an ARM cluster OR is isolated
such that the instance of ATF does not manage it. Define macros
in platform_def.h to help handle this.

Signed-off-by: Benjamin Fair <b-fair@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: Setup initial files for platform ...

Create the baseline Makefile, platform definitions file and platform
specific assembly macros file. This includes first set of constants
for the platform including cache sizes and linker format and a stub for
BL31 and the basic memory layout

K3 SoC family of processors do not use require a BL1 or BL2 binary,
since such functions are provided by an system controller on the SoC.
This lowers the burden of ATF to purely managing the local ARM cores
themselves.

Signed-off-by: Benjamin Fair <b-fair@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>