2020-02-25 |
16550: Use generic console_t data structure
...
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: I5c2fe3b6a667acf80c808cfec4a64059a2c9c25f
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Andre Przywara
committed
on 25 Feb 2020
|
2020-02-16 |
rockchip: fix definition of struct param_ddr_usage
...
In extreme cases, the number of secure regions is one more than
non-secure regions. So array "s_base" and "s_top"s size
in struct param_ddr_usage need to be adjust to "DDR_REGION_NR_MAX + 1".
Signed-off-by: XiaoDong Huang <derrick.huang@rock-chips.com>
Change-Id: Ifc09da2c8f8afa1aebcc78f8fbc21ac95abdece2
XiaoDong Huang
committed
on 16 Feb 2020
|
2020-01-28 |
Use correct type when reading SCR register
...
The Secure Configuration Register is 64-bits in AArch64 and 32-bits in
AArch32. Use u_register_t instead of unsigned int to reflect this.
Change-Id: I51b69467baba36bf0cfaec2595dc8837b1566934
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Louis Mayencourt
committed
on 28 Jan 2020
|
2019-11-17 |
plat/rockchip: initialize reset and poweroff GPIOs with known invalid value
...
And return NULL if we didn't get them in bl aux params otherwise reset and poweroff
will be broken on platforms that do not have reset and poweroff GPIOs.
Fixes: c1185ffde17c ("plat/rockchip: Switch to use new common BL aux parameter library")
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Change-Id: Ic6cf6383d8f05d745e2c5d5e1b1df38514ea8429
Vasily Khoruzhick
committed
on 17 Nov 2019
|
2019-08-15 |
Merge changes from topic "rockchip-uart-fixes" into integration
...
* changes:
rockchip: rk3399: store actual debug uart information on suspend
rockchip: move dt-coreboot uart distinction into param handling code
rockchip: make uart baudrate configurable
rockchip: px30: add uart5 as option for serial output
Paul Beesley
authored
on 15 Aug 2019
TrustedFirmware Code Review
committed
on 15 Aug 2019
|
2019-08-09 |
rockchip: move dt-coreboot uart distinction into param handling code
...
Rockchip platforms can be booted from either u-boot or coreboot.
So far the Coreboot-console was initizalized from a coreboot data struct
in the early_param2 callbacks and dt-based consoles with data from the
rockchip_get_uart_* functions.
But later code may also need this console information for example for
special suspend handling. To make this easy follow a suggestion from
Julius Werner and move the coreboot<->dt distinction into the
rockchip_get_uart_* functions, thus making correct data about the used
uart available to all Rockchip platform code at all times.
This includes a new rockchip_get_uart_clock as well, because while the
dt-platforms right now always just default the rate defined in a constant
Coreboot provides its own field for the clock rate and we don't want to
loose that information for the console init. Similarly the rk_uart_*
variables should move into the non-Coreboot code, to prevent them from
being marked as unused, which also requires the rk_get_uart_* functions
to move below the actual dt-parsing.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I278d595d2aa6c6864187fc8979a9fbff9814feac
Heiko Stuebner
committed
on 9 Aug 2019
|
2019-08-05 |
rockchip: make uart baudrate configurable
...
A previous patch already allowed to configure the uart output from the
devicetree, but on Rockchip platforms we also have the issue of different
vendors using different baudrates for their uarts.
For example, rk3399 has a default baudrate of 115200 which is true for
ChromeOS-devices and boards from Theobroma-Systems, while all the boards
using the vendor boot chain actually use a baudrate of 1500000.
Similarly the newly added px30 has a default of said 1500000 but some
boards may want to use the more widely used 115200.
The devicetree stdout-path node already contains the desired baudrate,
so add simple code to parse it from there and override the default,
which stays unchanged.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I7412139c3df3073a1996eb508ec08642ec6af90d
Heiko Stuebner
committed
on 5 Aug 2019
|
rockchip: px30: add uart5 as option for serial output
...
The px30 mini-evb can use either uart2 (muxed with the sd-card pins) or
uart5 via its pin header for serial output. Uart5 is especially useful
when needing to boot from the sd-card, where uart2 obviously is not
useable.
So add the uart5 constants and it as uart option for the serial-param
handler.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: Ib88df7a55d761ee104d312c9953a13de3beba1c4
Heiko Stuebner
committed
on 5 Aug 2019
|
2019-08-01 |
Switch AARCH32/AARCH64 to __aarch64__
...
NOTE: AARCH32/AARCH64 macros are now deprecated in favor of __aarch64__.
All common C compilers pre-define the same macros to signal which
architecture the code is being compiled for: __arm__ for AArch32 (or
earlier versions) and __aarch64__ for AArch64. There's no need for TF-A
to define its own custom macros for this. In order to unify code with
the export headers (which use __aarch64__ to avoid another dependency),
let's deprecate the AARCH32 and AARCH64 macros and switch the code base
over to the pre-defined standard macro. (Since it is somewhat
unintuitive that __arm__ only means AArch32, let's standardize on only
using __aarch64__.)
Change-Id: Ic77de4b052297d77f38fc95f95f65a8ee70cf200
Signed-off-by: Julius Werner <jwerner@chromium.org>
Julius Werner
committed
on 1 Aug 2019
|
Replace __ASSEMBLY__ with compiler-builtin __ASSEMBLER__
...
NOTE: __ASSEMBLY__ macro is now deprecated in favor of __ASSEMBLER__.
All common C compilers predefine a macro called __ASSEMBLER__ when
preprocessing a .S file. There is no reason for TF-A to define it's own
__ASSEMBLY__ macro for this purpose instead. To unify code with the
export headers (which use __ASSEMBLER__ to avoid one extra dependency),
let's deprecate __ASSEMBLY__ and switch the code base over to the
predefined standard.
Change-Id: Id7d0ec8cf330195da80499c68562b65cb5ab7417
Signed-off-by: Julius Werner <jwerner@chromium.org>
Julius Werner
committed
on 1 Aug 2019
|
2019-07-25 |
Merge changes I0d17ba6c,I540741d2,I9e6475ad,Ifd769320,I12c04a85, ... into integration
...
* changes:
plat/mediatek/mt81*: Use new bl31_params_parse() helper
plat/rockchip: Use new bl31_params_parse_helper()
Add helper to parse BL31 parameters (both versions)
Factor out cross-BL API into export headers suitable for 3rd party code
Use explicit-width data types in AAPCS parameter structs
plat/rockchip: Switch to use new common BL aux parameter library
Introduce lightweight BL platform parameter library
Soby Mathew
authored
on 25 Jul 2019
TrustedFirmware Code Review
committed
on 25 Jul 2019
|
2019-07-24 |
plat/rockchip: Use new bl31_params_parse_helper()
...
The Rockchip platform is a prime candidate for switching to the new
bl31_params_parse_helper(), so switch it over. This will allow BL2
implementations on this platform to transparently switch over to the
version 2 parameter structure.
Change-Id: I540741d2425c93f66c8697ce749a351eb2b3a7e8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Julius Werner
committed
on 24 Jul 2019
|
2019-07-23 |
Factor out cross-BL API into export headers suitable for 3rd party code
...
This patch adds a new include/export/ directory meant for inclusion in
third-party code. This is useful for cases where third-party code needs
to interact with TF-A interfaces and data structures (such as a custom
BL2-implementation like coreboot handing off to BL31). Directly
including headers from the TF-A repository avoids having to duplicate
all these definitions (and risk them going stale), but with the current
header structure this is not possible because handoff API definitions
are too deeply intertwined with other TF code/headers and chain-include
other headers that will not be available in the other environment.
The new approach aims to solve this by separating only the parts that
are really needed into these special headers that are self-contained and
will not chain-include other (non-export) headers. TF-A code should
never include them directly but should instead always include the
respective wrapper header, which will include the required prerequisites
(like <stdint.h>) before including the export header. Third-party code
can include the export headers via its own wrappers that make sure the
necessary definitions are available in whatever way that environment can
provide them.
Change-Id: Ifd769320ba51371439a8e5dd5b79c2516c3b43ab
Signed-off-by: Julius Werner <jwerner@chromium.org>
Julius Werner
committed
on 23 Jul 2019
|
plat/rockchip: Switch to use new common BL aux parameter library
...
This patch changes all Rockchip platforms to use the new common BL aux
parameter helpers. Since the parameter space is now cleanly split in
generic and vendor-specific parameters and the COREBOOT_TABLE
parameter is now generic, the parameter type number for that parameter
has to change. Since it only affects coreboot which always builds TF as
a submodule and includes its headers directly to get these constants,
this should not cause any issues. In general, after this point, we
should avoid changing already assigned parameter type numbers whenever
possible.
Change-Id: Ic99ddd1e91ff5e5fe212fa30c793a0b8394c9dad
Signed-off-by: Julius Werner <jwerner@chromium.org>
Julius Werner
committed
on 23 Jul 2019
|
2019-07-09 |
rockchip: px30: support px30
...
px30 is a Quad-core soc and Cortex-a53 inside.
This patch supports the following functions:
1. basic platform setup
2. power up/off cpus
3. suspend/resume cpus
4. suspend/resume system
5. reset system
6. power off system
Change-Id: I73d55aa978096c078242be921abe0ddca9e8f67e
Signed-off-by: XiaoDong Huang <derrick.huang@rock-chips.com>
XiaoDong Huang
committed
on 9 Jul 2019
|
2019-05-29 |
rockchip: drop rockchip-specific imported linker symbols for bl31
...
In the rockchip bl31 setup the __RO_START__ and __RO_END__ symbols are
currently imported into special BL31_RO_* constants while the general
code also imports them as BL_CODE_BASE and BL_CODE_END.
So we can just use the general symbols and can drop the duplication.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: Ibf1b48ad80bed897247a1690a32711030479262d
Heiko Stuebner
committed
on 29 May 2019
|
2019-05-01 |
rockchip: Allow console device to be set by DTB.
...
Currently the compile-time constant PLAT_RK_UART_BASE defines
which UART is used as console device. E.g. on RK3399 it is set
to UART2. That means, that a single bl31 image can not be used
for two boards, which just differ on the UART console.
This patch addresses this limitation by parsing the "stdout-path"
property from the "chosen" node in the DTB. The expected property
string is expected to have the form "serialN:XXX", with
N being either 0, 1, 2, 3 or 4. When the property is found, it will
be used to override PLAT_RK_UART_BASE.
Tested on RK3399-Q7, with a stdout-path of "serial0:115200n8".
Signed-off-by: Christoph Müllner <christophm30@gmail.com>
Change-Id: Iafe1320e77ab006c121f8d52745d54cef68a48c7
Christoph Müllner
committed
on 1 May 2019
|
2019-04-26 |
rockchip: only include libfdt in non-coreboot cases
...
While mainline u-boot always expects to submit the devicetree
as platform param, coreboot always uses the existing parameter
structure. As libfdt is somewhat big, it makes sense to limit
its inclusion to where necessary and thus only to non-coreboot
builds.
libfdt itself will get build in all cases, but only the non-
coreboot build will actually reference and thus include it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I4c5bc28405a14e6070917e48a526bfe77bab2fb7
Heiko Stuebner
committed
on 26 Apr 2019
|
2019-04-25 |
rockchip: add common aarch32 support
...
There are a number or ARMv7 Rockchip SoCs that are very similar in their
bringup routines to the existing arm64 SoCs, so there is quite a high
commonality possible here.
Things like virtualization also need psci and hyp-mode and instead of
trying to cram this into bootloaders like u-boot, barebox or coreboot
(all used in the field), re-use the existing infrastructure in TF-A
for this (both Rockchip plat support and armv7 support in general).
So add core support for aarch32 Rockchip SoCs, with actual soc support
following in a separate patch.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I298453985b5d8434934fc0c742fda719e994ba0b
Heiko Stuebner
committed
on 25 Apr 2019
|
rockchip: Allow socs with undefined wfe check bits
...
Some older socs like the rk3288 do not have the necessary registers
to check the wfi/wfe state of the cpu cores. Allow this case an "just"
do an additional delay similar to how the Linux kernel handles smp
right now.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I0f67af388b06b8bfb4a9bac411b4900ac266a77a
Heiko Stuebner
committed
on 25 Apr 2019
|
rockchip: move pmusram assembler code to a aarch64 subdir
...
The current code doing power-management from sram is highly
arm64-specific so should live in a corresponding subdirectory
and not in the common area.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I3b79ac26f70fd189d4d930faa6251439a644c5d9
Heiko Stuebner
committed
on 25 Apr 2019
|
2019-03-14 |
rockchip: add an fdt parsing stub for platform param
...
The Rockchip ATF platform can be entered from both Coreboot and U-Boot.
While Coreboot does submit the list of linked parameter structs as
platform param, upstream u-boot actually always provides a pointer
to a devicetree as parameter.
This results in current ATF not running at all when started from U-Boot.
To fix this, add a stub that checks if the parameter is a fdt so we
can at least boot and not get stuck. Later on we can extend this with
actual parsing of information from the devicetree.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Heiko Stuebner
committed
on 14 Mar 2019
|
2019-01-28 |
rockchip: Fix GICv2 interrupts
...
After the removal of deprecated interfaces in TF 2.0 the migration to
the new GIC driver interfaces was done incorrectly in rk3328 and rk3368:
2d6f1f01b141 ("rockchip: Migrate to new interfaces").
In the GICv2 driver it is mandated that all interrupts are Group 0
interrupts. This patch simply moves all Group 1 interrupts to Group 0.
Change-Id: I224c0135603eb5b81bd512976361500c0d129a91
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 28 Jan 2019
|
2019-01-04 |
Sanitise includes across codebase
...
Enforce full include path for includes. Deprecate old paths.
The following folders inside include/lib have been left unchanged:
- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}
The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).
For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").
This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.
Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.
Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 4 Jan 2019
|
2018-11-08 |
Standardise header guards across codebase
...
All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.
The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.
The exceptions are files that are imported from other projects:
- CryptoCell driver
- dt-bindings folders
- zlib headers
Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 8 Nov 2018
|
2018-10-10 |
Replace S-EL3 references by EL3
...
The "Secure" prefix (S-ELx) is valid only for S-EL0 and S-EL1 but is
meaningless for EL3, since EL3 is always secure. Hence, the "S" prefix
has been removed from wherever it was used as "S-EL3".
Change-Id: Icdeac9506d763f9f83d7297c7113aec7b85e9dbe
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
John Tsichritzis
committed
on 10 Oct 2018
|
2018-09-28 |
rockchip: Migrate to new interfaces
...
- Migrate to new GIC interfaces.
- Migrate to bl31_early_platform_setup2().
- Use bl31_warm_entrypoint() instead of psci_entrypoint().
- Use PLAT_VIRT_ADDR_SPACE_SIZE and PLAT_PHY_ADDR_SPACE_SIZE.
- Update Makefile paths.
- Remove references to removed build options.
- Use private definition of bl31_params_t.
Change-Id: I860341594b5c868b2fcaa59d23957ee718472ef1
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 28 Sep 2018
|
2018-08-15 |
rockchip: Add plat_is_my_cpu_primary function
...
This function is required for platforms where
COLD_BOOT_SINGLE_CPU=0 however it was missing from rockchip
platforms
Change-Id: I32a85f226a4f22085a27113903f34bdb6f28dbcc
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Daniel Boulby
committed
on 15 Aug 2018
|
2018-07-11 |
Remove .func and .endfunc assembler directives
...
These directives are only used when stabs debugging information
is used, but we use ELF which uses DWARF debugging information.
Clang assembler doesn't support these directives, and removing
them makes the code more compatible with clang.
Change-Id: I2803f22ebd24c0fe248e04ef1b17de9cec5f89c4
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Roberto Vargas
committed
on 11 Jul 2018
|
2018-06-14 |
Make TF UUID RFC 4122 compliant
...
RFC4122 defines that fields are stored in network order (big endian),
but TF-A stores them in machine order (little endian by default in TF-A).
We cannot change the future UUIDs that are already generated, but we can store
all the bytes using arrays and modify fiptool to generate the UUIDs with
the correct byte order.
Change-Id: I97be2d3168d91f4dee7ccfafc533ea55ff33e46f
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Roberto Vargas
committed
on 14 Jun 2018
|