if ARCH_AT91 config ARCH_TEXT_BASE hex default 0x23f00000 config BOARDINFO default "Atmel 91SAM9260-EK" if MACH_AT91SAM9260EK default "Atmel at91sam9261-ek" if MACH_AT91SAM9261EK default "Atmel at91sam9263-ek" if MACH_AT91SAM9263EK default "Atmel at91sam9g10-ek" if MACH_AT91SAM9G10EK default "Atmel at91sam9g20-ek" if MACH_AT91SAM9G20EK default "Atmel at91sam9m10g45-ek" if MACH_AT91SAM9M10G45EK default "Bucyrus MMC-CPU" if MACH_MMCCPU default "Ronetix PM9261" if MACH_PM9261 default "Ronetix PM9263" if MACH_PM9263 default "Ronetix PM9G45" if MACH_PM9G45 config HAVE_NAND_ATMEL_BUSWIDTH_16 bool comment "Atmel AT91 System-on-Chip" choice prompt "Atmel AT91 Processor" config ARCH_AT91SAM9260 bool "AT91SAM9260" select CPU_ARM926T select HAS_MACB config ARCH_AT91SAM9261 bool "AT91SAM9261" select CPU_ARM926T config ARCH_AT91SAM9263 bool "AT91SAM9263" select CPU_ARM926T select HAS_MACB config ARCH_AT91SAM9G10 bool "AT91SAM9G10" select CPU_ARM926T config ARCH_AT91SAM9G20 bool "AT91SAM9G20" select CPU_ARM926T select HAS_MACB config ARCH_AT91SAM9G45 bool "AT91SAM9G45 or AT91SAM9M10" select CPU_ARM926T select HAS_MACB endchoice # ---------------------------------------------------------- if ARCH_AT91SAM9260 choice prompt "AT91SAM9260 Board Type" config MACH_AT91SAM9260EK bool "Atmel AT91SAM9260-EK" select HAVE_NAND_ATMEL_BUSWIDTH_16 help Say y here if you are using Atmel's AT91SAM9260-EK Evaluation board endchoice endif # ---------------------------------------------------------- if ARCH_AT91SAM9261 choice prompt "AT91SAM9261 Board Type" config MACH_AT91SAM9261EK bool "Atmel AT91SAM9261-EK Evaluation Kit" select HAS_DM9000 select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> config MACH_PM9261 bool "Ronetix PM9261" select HAS_DM9000 select MACH_HAS_LOWLEVEL_INIT help Say y here if you are using the Ronetix PM9261 Board endchoice endif # ---------------------------------------------------------- if ARCH_AT91SAM9G10 choice prompt "AT91SAM9G10 Board Type" config MACH_AT91SAM9G10EK bool "Atmel AT91SAM9G10-EK Evaluation Kit" select HAVE_NAND_ATMEL_BUSWIDTH_16 select HAS_DM9000 help Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> endchoice endif # ---------------------------------------------------------- if ARCH_AT91SAM9G20 choice prompt "AT91SAM9G20 Board Type" config MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit" select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit that embeds only one SD/MMC slot. endchoice endif # ---------------------------------------------------------- if ARCH_AT91SAM9263 choice prompt "AT91SAM9263 Board Type" config MACH_AT91SAM9263EK bool "Atmel AT91SAM9263-EK" select MACH_HAS_LOWLEVEL_INIT select HAVE_NAND_ATMEL_BUSWIDTH_16 help Say y here if you are using Atmel's AT91SAM9263-EK Evaluation board config MACH_MMCCPU bool "Bucyrus MMC-CPU" help Say y here if you are using the Bucyrus MMC-CPU config MACH_PM9263 bool "Ronetix PM9263" select MACH_HAS_LOWLEVEL_INIT help Say y here if you are using the Ronetix PM9263 Board endchoice endif if ARCH_AT91SAM9G45 choice prompt "AT91SAM9G45 or AT91SAM9M10 Board Type" config MACH_AT91SAM9M10G45EK bool "Atmel AT91SAM9M10G45-EK Evaluation Kit" select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit. <http://atmel.com/dyn/products/tools_card_v2.asp?tool_id=4735> config MACH_PM9G45 bool "Ronetix PM9G45" help Say y here if you are using the Ronetix PM9G45 Board endchoice endif # ---------------------------------------------------------- comment "AT91 Board Options" config MTD_NAND_ATMEL_BUSWIDTH_16 bool "Enable 16-bit data bus interface to NAND flash" depends on HAVE_NAND_ATMEL_BUSWIDTH_16 help On AT91SAM926x boards both types of NAND flash can be present (8 and 16 bit data bus width). config AT91_HAVE_2MMC bool "Have 2 MMC" depends on MACH_AT91SAM9G20EK help Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and onwards. endif