/*
* Device Tree Source for PIC32MZDA clock data
*
* Purna Chandra Mandal <purna.mandal@microchip.com>
* Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
*
* Licensed under GPLv2 or later.
*/
/* all fixed rate clocks */
/ {
POSC:posc_clk { /* On-chip primary oscillator */
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
FRC:frc_clk { /* internal FRC oscillator */
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <8000000>;
};
BFRC:bfrc_clk { /* internal backup FRC oscillator */
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <8000000>;
};
LPRC:lprc_clk { /* internal low-power FRC oscillator */
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32000>;
};
/* UPLL provides clock to USBCORE */
UPLL:usb_phy_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "usbphy_clk";
};
TxCKI:txcki_clk { /* external clock input on TxCLKI pin */
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <4000000>;
status = "disabled";
};
/* external clock input on REFCLKIx pin */
REFIx:refix_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
status = "disabled";
};
/* PIC32 specific clks */
pic32_clktree {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x1f801200 0x200>;
compatible = "microchip,pic32mzda-clk";
ranges = <0 0x1f801200 0x200>;
/* secondary oscillator; external input on SOSCI pin */
SOSC:sosc_clk@0 {
#clock-cells = <0>;
compatible = "microchip,pic32mzda-sosc";
clock-frequency = <32768>;
reg = <0x000 0x10>, /* enable reg */
<0x1d0 0x10>; /* status reg */
microchip,bit-mask = <0x02>; /* enable mask */
microchip,status-bit-mask = <0x10>; /* status-mask*/
};
FRCDIV:frcdiv_clk {
#clock-cells = <0>;
compatible = "microchip,pic32mzda-frcdivclk";
clocks = <&FRC>;
clock-output-names = "frcdiv_clk";
};
/* System PLL clock */
SYSPLL:spll_clk@020 {
#clock-cells = <0>;
compatible = "microchip,pic32mzda-syspll";
reg = <0x020 0x10>, /* SPLL register */
<0x1d0 0x10>; /* CLKSTAT register */
clocks = <&POSC>, <&FRC>;
clock-output-names = "sys_pll";
microchip,status-bit-mask = <0x80>; /* SPLLRDY */
};
/* system clock; mux with postdiv & slew */
SYSCLK:sys_clk@1c0 {
#clock-cells = <0>;
compatible = "microchip,pic32mzda-sysclk-v2";
reg = <0x1c0 0x04>; /* SLEWCON */
clocks = <&FRCDIV>, <&SYSPLL>, <&POSC>, <&SOSC>,
<&LPRC>, <&FRCDIV>;
microchip,clock-indices = <0>, <1>, <2>, <4>,
<5>, <7>;
clock-output-names = "sys_clk";
};
/* Peripheral bus1 clock */
PBCLK1:pb1_clk@140 {
reg = <0x140 0x10>;
#clock-cells = <0>;
compatible = "microchip,pic32mzda-pbclk";
clocks = <&SYSCLK>;
clock-output-names = "pb1_clk";
/* used by system modules, not gateable */
microchip,ignore-unused;
};
/* Peripheral bus2 clock */
PBCLK2:pb2_clk@150 {
reg = <0x150 0x10>;
#clock-cells = <0>;
compatible = "microchip,pic32mzda-pbclk";
clocks = <&SYSCLK>;
clock-output-names = "pb2_clk";
/* avoid gating even if unused */
microchip,ignore-unused;
};
/* Peripheral bus3 clock */
PBCLK3:pb3_clk@160 {
reg = <0x160 0x10>;
#clock-cells = <0>;
compatible = "microchip,pic32mzda-pbclk";
clocks = <&SYSCLK>;
clock-output-names = "pb3_clk";
};
/* Peripheral bus4 clock(I/O ports, GPIO) */
PBCLK4:pb4_clk@170 {
reg = <0x170 0x10>;
#clock-cells = <0>;
compatible = "microchip,pic32mzda-pbclk";
clocks = <&SYSCLK>;
clock-output-names = "pb4_clk";
};
/* Peripheral bus clock */
PBCLK5:pb5_clk@180 {
reg = <0x180 0x10>;
#clock-cells = <0>;
compatible = "microchip,pic32mzda-pbclk";
clocks = <&SYSCLK>;
clock-output-names = "pb5_clk";
};
/* Peripheral Bus6 clock; */
PBCLK6:pb6_clk@190 {
reg = <0x190 0x10>;
compatible = "microchip,pic32mzda-pbclk";
clocks = <&SYSCLK>;
#clock-cells = <0>;
};
/* Peripheral bus7 clock */
PBCLK7:pb7_clk@1a0 {
reg = <0x1a0 0x10>;
#clock-cells = <0>;
compatible = "microchip,pic32mzda-pbclk";
/* CPU is driven by this clock; so named */
clock-output-names = "cpu_clk";
clocks = <&SYSCLK>;
};
/* Reference Oscillator clock for SPI/I2S */
REFCLKO1:refo1_clk@80 {
reg = <0x080 0x20>;
#clock-cells = <0>;
compatible = "microchip,pic32mzda-refoclk";
clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
<&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
<5>, <7>, <8>, <9>;
clock-output-names = "refo1_clk";
};
/* Reference Oscillator clock for SQI */
REFCLKO2:refo2_clk@a0 {
reg = <0x0a0 0x20>;
#clock-cells = <0>;
compatible = "microchip,pic32mzda-refoclk";
clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
<&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
<5>, <7>, <8>, <9>;
clock-output-names = "refo2_clk";
};
/* Reference Oscillator clock, ADC */
REFCLKO3:refo3_clk@c0 {
reg = <0x0c0 0x20>;
compatible = "microchip,pic32mzda-refoclk";
clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
<&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
<5>, <7>, <8>, <9>;
#clock-cells = <0>;
clock-output-names = "refo3_clk";
};
/* Reference Oscillator clock */
REFCLKO4:refo4_clk@e0 {
reg = <0x0e0 0x20>;
compatible = "microchip,pic32mzda-refoclk";
clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
<&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
<5>, <7>, <8>, <9>;
#clock-cells = <0>;
clock-output-names = "refo4_clk";
};
/* Reference Oscillator clock, LCD */
REFCLKO5:refo5_clk@100 {
reg = <0x100 0x20>;
compatible = "microchip,pic32mzda-refoclk";
clocks = <&SYSCLK>,<&PBCLK1>,<&POSC>,<&FRC>,<&LPRC>,
<&SOSC>,<&SYSPLL>,<&REFIx>,<&BFRC>;
microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
<5>, <7>, <8>, <9>;
#clock-cells = <0>;
clock-output-names = "refo5_clk";
};
};
};
