/** * @file * @brief Board Initialization routines for the phyCARD-A-L1 * * FileName: arch/arm/boards/phycard-a-l1/pca-a-l1.c * * This board is based on OMAP3530. * More on OMAP3530 (including documentation can be found here): * http://focus.ti.com/docs/prod/folders/print/omap3530.html * * This file provides initialization in two stages: * @li Boot time initialization - just get SDRAM working. * This is run from SRAM - so no case constructs and global vars can be used. * @li Run time initialization - this is for the rest of the initializations * such as flash, uart etc. * * Boot time initialization includes: * @li SDRAM initialization. * @li Pin Muxing relevant for the EVM. * * Run time initialization includes * @li serial @ref serial_ns16550.c driver device definition * * Originally from arch/arm/boards/omap/board-beagle.c */ /* * Copyright (C) 2011 Phytec Messtechnik GmbH - http://www.phytec.de/ * Juergen Kilb <j.kilb@phytec.de> * * based on code from Texas Instruments / board-beagle.c * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ * Sanjeev Premi <premi@ti.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <common.h> #include <console.h> #include <driver.h> #include <errno.h> #include <init.h> #include <nand.h> #include <ns16550.h> #include <partition.h> #include <sizes.h> #include <asm/armlinux.h> #include <asm/io.h> #include <generated/mach-types.h> #include <linux/err.h> #include <mach/control.h> #include <mach/gpmc.h> #include <mach/gpmc_nand.h> #include <mach/omap_hsmmc.h> #include <mach/xload.h> #include <partition.h> #include <nand.h> #include <mach/omap3-mux.h> #include <mach/sdrc.h> #include <mach/silicon.h> #include <mach/sys_info.h> #include <mach/syslib.h> #include <mach/xload.h> #include "pca-a-l1.h" #define SMC911X_BASE 0x2c000000 /* * Boot-time initialization(s) */ /** * @brief Initialize the SDRC module * Initialisation for 1x256MByte but normally * done by x-loader. * @return void */ static void pcaal1_sdrc_init(void) { /* SDRAM software reset */ /* No idle ack and RESET enable */ writel(0x1A, SDRC_REG(SYSCONFIG)); sdelay(100); /* No idle ack and RESET disable */ writel(0x18, SDRC_REG(SYSCONFIG)); /* SDRC Sharing register */ /* 32-bit SDRAM on data lane [31:0] - CS0 */ /* pin tri-stated = 1 */ writel(0x00000100, SDRC_REG(SHARING)); /* ----- SDRC Registers Configuration --------- */ /* SDRC_MCFG0 register */ writel(0x03588099, SDRC_REG(MCFG_0)); /* SDRC_RFR_CTRL0 register */ writel(0x0004e201, SDRC_REG(RFR_CTRL_0)); /* SDRC_ACTIM_CTRLA0 register */ writel(0x629DB4C6, SDRC_REG(ACTIM_CTRLA_0)); /* SDRC_ACTIM_CTRLB0 register */ writel(0x00011113, SDRC_REG(ACTIM_CTRLB_0)); /* Disble Power Down of CKE due to 1 CKE on combo part */ writel(0x00000081, SDRC_REG(POWER)); /* SDRC_MANUAL command register */ /* NOP command */ writel(0x00000000, SDRC_REG(MANUAL_0)); /* Precharge command */ writel(0x00000001, SDRC_REG(MANUAL_0)); /* Auto-refresh command */ writel(0x00000002, SDRC_REG(MANUAL_0)); /* Auto-refresh command */ writel(0x00000002, SDRC_REG(MANUAL_0)); /* SDRC MR0 register Burst length=4 */ writel(0x00000032, SDRC_REG(MR_0)); /* SDRC DLLA control register */ writel(0x0000000A, SDRC_REG(DLLA_CTRL)); } /** * @brief Do the necessary pin muxing required for phyCARD-A-L1. * Some pins in OMAP3 do not have alternate modes. * We don't program these pins. * * See @ref MUX_VAL for description of the muxing mode. * * @return void */ static void pcaal1_mux_config(void) { /* * Serial Interface */ MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)); MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)); MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | EN | M0)); MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)); /* GPMC */ MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)); MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)); MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)); MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)); MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)); MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)); MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)); MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)); MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)); MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)); MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)); MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)); MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)); MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)); MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)); MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)); MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)); MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)); MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)); MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)); MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)); MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)); MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)); MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)); MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)); MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)); MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)); MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)); MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)); MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)); MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)); MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)); MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)); /* ETH_PME (GPIO_55) */ MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M4)); /* #CS5 (Ethernet) */ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)); /* ETH_FIFO_SEL (GPIO_57) */ MUX_VAL(CP(GPMC_NCS6), (IDIS | PTD | EN | M4)); /* ETH_AMDIX_EN (GPIO_58) */ MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | EN | M4)); /* ETH_nRST (GPIO_64) */ MUX_VAL(CP(GPMC_WAIT2), (IDIS | PTU | EN | M4)); /* HSMMC1 */ MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)); MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)); MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)); MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)); MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)); MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)); /* USBOTG_nRST (GPIO_63) */ MUX_VAL(CP(GPMC_WAIT1), (IDIS | PTU | EN | M4)); /* USBH_nRST (GPIO_65) */ MUX_VAL(CP(GPMC_WAIT3), (IDIS | PTU | EN | M4)); } /** * @brief The basic entry point for board initialization. * * This is called as part of machine init (after arch init). * This is again called with stack in SRAM, so not too many * constructs possible here. * * @return void */ void board_init(void) { int in_sdram = running_in_sdram(); pcaal1_mux_config(); /* Dont reconfigure SDRAM while running in SDRAM! */ if (!in_sdram) pcaal1_sdrc_init(); } /* * Run-time initialization(s) */ static struct NS16550_plat serial_plat = { .clock = 48000000, /* 48MHz (APLL96/2) */ .shift = 2, }; /** * @brief Initialize the serial port to be used as console. * * @return result of device registration */ static int pcaal1_init_console(void) { add_ns16550_device(-1, OMAP_UART3_BASE, 1024, IORESOURCE_MEM_8BIT, &serial_plat); return 0; } console_initcall(pcaal1_init_console); #ifdef CONFIG_DRIVER_NET_SMC911X /** GPMC timing for our SMSC9221 device */ static struct gpmc_config smsc_cfg = { .cfg = { 0x41001000, /*CONF1 */ 0x00040500, /*CONF2 */ 0x00000000, /*CONF3 */ 0x04000500, /*CONF4 */ 0x05050505, /*CONF5 */ 0x000002c1, /*CONF6 */ }, .base = SMC911X_BASE, /* GPMC address map as small as possible */ .size = GPMC_SIZE_16M, }; /* * Routine: setup_net_chip * Description: Setting up the configuration GPMC registers specific to the * Ethernet hardware. */ static void pcaal1_setup_net_chip(void) { gpmc_cs_config(5, &smsc_cfg); } #endif static int pcaal1_mem_init(void) { #ifdef CONFIG_GPMC /* * WP is made high and WAIT1 active Low */ gpmc_generic_init(0x10); #endif arm_add_mem_device("ram0", OMAP_SDRC_CS0, get_sdr_cs_size(SDRC_CS0_OSET)); if ((get_sdr_cs_size(SDRC_CS1_OSET) != 0) && (get_sdr_cs1_base() != OMAP_SDRC_CS0)) arm_add_mem_device("ram1", get_sdr_cs1_base(), get_sdr_cs_size(SDRC_CS1_OSET)); return 0; } mem_initcall(pcaal1_mem_init); #ifdef CONFIG_MCI_OMAP_HSMMC struct omap_hsmmc_platform_data pcaal1_hsmmc_plat = { .f_max = 26000000, }; #endif static int pcaal1_init_devices(void) { #ifdef CONFIG_MCI_OMAP_HSMMC add_generic_device("omap-hsmmc", -1, NULL, OMAP_MMC1_BASE, SZ_4K, IORESOURCE_MEM, &pcaal1_hsmmc_plat); #endif #ifdef CONFIG_DRIVER_NET_SMC911X pcaal1_setup_net_chip(); add_generic_device("smc911x", -1, NULL, SMC911X_BASE, SZ_4K, IORESOURCE_MEM, NULL); #endif armlinux_set_bootparams((void *)0x80000100); armlinux_set_architecture(MACH_TYPE_PCAAL1); return 0; } device_initcall(pcaal1_init_devices); static int pcaal1_late_init(void) { struct device_d *nand; gpmc_generic_nand_devices_init(0, 16, OMAP_ECC_SOFT); nand = get_device_by_name("nand0"); devfs_add_partition("nand0", 0x00000, 0x80000, PARTITION_FIXED, "x-loader"); dev_add_bb_dev("self_raw", "x_loader0"); devfs_add_partition("nand0", 0x80000, 0x1e0000, PARTITION_FIXED, "self_raw"); dev_add_bb_dev("self_raw", "self0"); devfs_add_partition("nand0", 0x260000, 0x20000, PARTITION_FIXED, "env_raw"); dev_add_bb_dev("env_raw", "env0"); return 0; } late_initcall(pcaal1_late_init);