Newer
Older
barebox / dts / src / arm64 / arm / juno.dts
@Sascha Hauer Sascha Hauer on 6 May 2015 5 KB dts: update to v4.1-rc1
/*
 * ARM Ltd. Juno Platform
 *
 * Copyright (c) 2013-2014 ARM Ltd.
 *
 * This file is licensed under a dual GPLv2 or BSD license.
 */

/dts-v1/;

#include <dt-bindings/interrupt-controller/arm-gic.h>

/ {
	model = "ARM Juno development board (r0)";
	compatible = "arm,juno", "arm,vexpress";
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	aliases {
		serial0 = &soc_uart0;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	psci {
		compatible = "arm,psci-0.2";
		method = "smc";
	};

	cpus {
		#address-cells = <2>;
		#size-cells = <0>;

		A57_0: cpu@0 {
			compatible = "arm,cortex-a57","arm,armv8";
			reg = <0x0 0x0>;
			device_type = "cpu";
			enable-method = "psci";
			next-level-cache = <&A57_L2>;
		};

		A57_1: cpu@1 {
			compatible = "arm,cortex-a57","arm,armv8";
			reg = <0x0 0x1>;
			device_type = "cpu";
			enable-method = "psci";
			next-level-cache = <&A57_L2>;
		};

		A53_0: cpu@100 {
			compatible = "arm,cortex-a53","arm,armv8";
			reg = <0x0 0x100>;
			device_type = "cpu";
			enable-method = "psci";
			next-level-cache = <&A53_L2>;
		};

		A53_1: cpu@101 {
			compatible = "arm,cortex-a53","arm,armv8";
			reg = <0x0 0x101>;
			device_type = "cpu";
			enable-method = "psci";
			next-level-cache = <&A53_L2>;
		};

		A53_2: cpu@102 {
			compatible = "arm,cortex-a53","arm,armv8";
			reg = <0x0 0x102>;
			device_type = "cpu";
			enable-method = "psci";
			next-level-cache = <&A53_L2>;
		};

		A53_3: cpu@103 {
			compatible = "arm,cortex-a53","arm,armv8";
			reg = <0x0 0x103>;
			device_type = "cpu";
			enable-method = "psci";
			next-level-cache = <&A53_L2>;
		};

		A57_L2: l2-cache0 {
			compatible = "cache";
		};

		A53_L2: l2-cache1 {
			compatible = "cache";
		};
	};

	memory@80000000 {
		device_type = "memory";
		/* last 16MB of the first memory area is reserved for secure world use by firmware */
		reg = <0x00000000 0x80000000 0x0 0x7f000000>,
		      <0x00000008 0x80000000 0x1 0x80000000>;
	};

	gic: interrupt-controller@2c001000 {
		compatible = "arm,gic-400", "arm,cortex-a15-gic";
		reg = <0x0 0x2c010000 0 0x1000>,
		      <0x0 0x2c02f000 0 0x2000>,
		      <0x0 0x2c04f000 0 0x2000>,
		      <0x0 0x2c06f000 0 0x2000>;
		#address-cells = <0>;
		#interrupt-cells = <3>;
		interrupt-controller;
		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
	};

	pmu {
		compatible = "arm,armv8-pmuv3";
		interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-affinity = <&A57_0>,
				     <&A57_1>,
				     <&A53_0>,
				     <&A53_1>,
				     <&A53_2>,
				     <&A53_3>;
	};

	/include/ "juno-clocks.dtsi"

	dma@7ff00000 {
		compatible = "arm,pl330", "arm,primecell";
		reg = <0x0 0x7ff00000 0 0x1000>;
		#dma-cells = <1>;
		#dma-channels = <8>;
		#dma-requests = <32>;
		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&soc_faxiclk>;
		clock-names = "apb_pclk";
	};

	soc_uart0: uart@7ff80000 {
		compatible = "arm,pl011", "arm,primecell";
		reg = <0x0 0x7ff80000 0x0 0x1000>;
		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
		clock-names = "uartclk", "apb_pclk";
	};

	i2c@7ffa0000 {
		compatible = "snps,designware-i2c";
		reg = <0x0 0x7ffa0000 0x0 0x1000>;
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
		clock-frequency = <400000>;
		i2c-sda-hold-time-ns = <500>;
		clocks = <&soc_smc50mhz>;

		dvi0: dvi-transmitter@70 {
			compatible = "nxp,tda998x";
			reg = <0x70>;
		};

		dvi1: dvi-transmitter@71 {
			compatible = "nxp,tda998x";
			reg = <0x71>;
		};
	};

	ohci@7ffb0000 {
		compatible = "generic-ohci";
		reg = <0x0 0x7ffb0000 0x0 0x10000>;
		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&soc_usb48mhz>;
	};

	ehci@7ffc0000 {
		compatible = "generic-ehci";
		reg = <0x0 0x7ffc0000 0x0 0x10000>;
		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&soc_usb48mhz>;
	};

	memory-controller@7ffd0000 {
		compatible = "arm,pl354", "arm,primecell";
		reg = <0 0x7ffd0000 0 0x1000>;
		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&soc_smc50mhz>;
		clock-names = "apb_pclk";
	};

	smb {
		compatible = "simple-bus";
		#address-cells = <2>;
		#size-cells = <1>;
		ranges = <0 0 0 0x08000000 0x04000000>,
			 <1 0 0 0x14000000 0x04000000>,
			 <2 0 0 0x18000000 0x04000000>,
			 <3 0 0 0x1c000000 0x04000000>,
			 <4 0 0 0x0c000000 0x04000000>,
			 <5 0 0 0x10000000 0x04000000>;

		#interrupt-cells = <1>;
		interrupt-map-mask = <0 0 15>;
		interrupt-map = <0 0  0 &gic 0  68 IRQ_TYPE_LEVEL_HIGH>,
				<0 0  1 &gic 0  69 IRQ_TYPE_LEVEL_HIGH>,
				<0 0  2 &gic 0  70 IRQ_TYPE_LEVEL_HIGH>,
				<0 0  3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>,
				<0 0  4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>,
				<0 0  5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>,
				<0 0  6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>,
				<0 0  7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>,
				<0 0  8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>,
				<0 0  9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>,
				<0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>,
				<0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>,
				<0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>;

		/include/ "juno-motherboard.dtsi"
	};
};