/* * Copyright (C) 2007 Sascha Hauer, Pengutronix * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * */ #include <common.h> #include <net.h> #include <cfi_flash.h> #include <init.h> #include <environment.h> #include <fec.h> #include <asm/armlinux.h> #include <asm/mach-types.h> #include <partition.h> #include <fs.h> #include <fcntl.h> #include <asm/io.h> #include <asm/hardware.h> #include <nand.h> #include <linux/mtd/nand.h> #include <asm/arch/ether.h> #include <asm/arch/atmel_nand.h> #include <gpio.h> #define NAND_READY_GPIO (32 * 2 + 13) /* Port C pin 13 */ #define NAND_ENABLE_GPIO (32 * 2 + 14) /* Port C pin 14 */ static struct atmel_nand_data nand_pdata = { .ale = 21, .cle = 22, /* .det_pin = ... not connected */ .ecc_base = (void __iomem *)AT91C_BASE_HECC, .ecc_mode = NAND_ECC_HW, .rdy_pin = NAND_READY_GPIO, .enable_pin = NAND_ENABLE_GPIO, #if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, #endif }; static struct device_d nand_dev = { .name = "atmel_nand", .map_base = 0x40000000, .size = 0x10, .platform_data = &nand_pdata, }; static struct device_d sdram_dev = { .name = "ram", .id = "ram0", .map_base = 0x20000000, .size = 64 * 1024 * 1024, .type = DEVICE_TYPE_DRAM, }; static struct at91sam_ether_platform_data macb_pdata = { .flags = AT91SAM_ETHER_RMII, .phy_addr = 0, }; static struct device_d macb_dev = { .name = "macb", .id = "eth0", .map_base = AT91C_BASE_EMACB, .size = 0x1000, .type = DEVICE_TYPE_ETHER, .platform_data = &macb_pdata, }; static int at91sam9260ek_devices_init(void) { struct device_d *nand, *dev; register_device(&sdram_dev); gpio_direction_input(NAND_READY_GPIO); gpio_direction_output(NAND_ENABLE_GPIO, 1); register_device(&nand_dev); register_device(&macb_dev); armlinux_set_bootparams((void *)0x20000100); armlinux_set_architecture(MACH_TYPE_AT91SAM9260EK); nand = get_device_by_path("/dev/nand0"); dev = dev_add_partition(nand, 0x00000, 0x80000, PARTITION_FIXED, "self_raw"); dev_add_bb_dev(dev, "self0"); dev = dev_add_partition(nand, 0x40000, 0x40000, PARTITION_FIXED, "env_raw"); dev_add_bb_dev(dev, "env0"); dev_add_partition(nand, 0x00000, 0x80000, PARTITION_FIXED, "self"); dev_add_partition(nand, 0x40000, 0x40000, PARTITION_FIXED, "env"); return 0; } device_initcall(at91sam9260ek_devices_init); static struct device_d at91sam9260ek_serial_device = { .name = "atmel_serial", .id = "cs0", .map_base = AT91C_BASE_DBGU, .size = 4096, .type = DEVICE_TYPE_CONSOLE, }; static int at91sam9260ek_console_init(void) { register_device(&at91sam9260ek_serial_device); return 0; } console_initcall(at91sam9260ek_console_init);