/*
* Memory sub-system initialization code for INCA-IP development board.
*
* Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/regdef.h>
#define EBU_MODUL_BASE 0xB8000200
#define EBU_CLC(value) 0x0000(value)
#define EBU_CON(value) 0x0010(value)
#define EBU_ADDSEL0(value) 0x0020(value)
#define EBU_ADDSEL1(value) 0x0024(value)
#define EBU_ADDSEL2(value) 0x0028(value)
#define EBU_BUSCON0(value) 0x0060(value)
#define EBU_BUSCON1(value) 0x0064(value)
#define EBU_BUSCON2(value) 0x0068(value)
#define MC_MODUL_BASE 0xBF800000
#define MC_ERRCAUSE(value) 0x0100(value)
#define MC_ERRADDR(value) 0x0108(value)
#define MC_IOGP(value) 0x0800(value)
#define MC_SELFRFSH(value) 0x0A00(value)
#define MC_CTRLENA(value) 0x1000(value)
#define MC_MRSCODE(value) 0x1008(value)
#define MC_CFGDW(value) 0x1010(value)
#define MC_CFGPB0(value) 0x1018(value)
#define MC_LATENCY(value) 0x1038(value)
#define MC_TREFRESH(value) 0x1040(value)
#define CGU_MODUL_BASE 0xBF107000
#define CGU_PLL1CR(value) 0x0008(value)
#define CGU_DIVCR(value) 0x0010(value)
#define CGU_MUXCR(value) 0x0014(value)
#define CGU_PLL1SR(value) 0x000C(value)
.globl memsetup
memsetup:
/* EBU Initialization for the Flash CS0 and CS2.
*/
li t0, EBU_MODUL_BASE
li t1, 0xA0000041
sw t1, EBU_ADDSEL0(t0)
#if CPU_CLOCK_RATE==100000000 /* 100 MHz clock for the MIPS core */
lw t1, EBU_BUSCON0(t0) /* value set up by magic flash word */
sw t1, EBU_BUSCON2(t0)
#else /* 150 MHz or 133 MHz */
li t1, 0x8841417E
sw t1, EBU_BUSCON0(t0)
sw t1, EBU_BUSCON2(t0)
#endif
li t1, 0xA0800041
sw t1, EBU_ADDSEL2(t0)
/* Need to initialize CS1 too, so as to to prevent overlapping with
* Flash bank 1.
*/
li t1, 0xBE0000F1
sw t1, EBU_ADDSEL1(t0)
#if CPU_CLOCK_RATE==100000000 /* 100 MHz clock for the MIPS core */
li t1, 0x684142BD
#else /* 150 MHz or 133 MHz */
li t1, 0x684143FD
#endif
sw t1, EBU_BUSCON1(t0)
#if CPU_CLOCK_RATE==150000000 /* 150 MHz clock for the MIPS core */
li t0, CGU_MODUL_BASE
li t1, 0x80000017
sw t1, CGU_DIVCR(t0)
li t1, 0xC00B0001
sw t1, CGU_PLL1CR(t0)
lui t2, 0x8000
b1:
lw t1, CGU_PLL1SR(t0)
and t1, t1, t2
beq t1, zero, b1
li t1, 0x80000001
sw t1, CGU_MUXCR(t0)
#elif CPU_CLOCK_RATE==133000000 /* 133 MHz clock for the MIPS core */
li t0, CGU_MODUL_BASE
li t1, 0x80000054
sw t1, CGU_DIVCR(t0)
li t1, 0x80000000
sw t1, CGU_MUXCR(t0)
li t1, 0x800B0001
sw t1, CGU_PLL1CR(t0)
#endif
/* SDRAM Initialization.
*/
li t0, MC_MODUL_BASE
/* Clear Error log registers */
sw zero, MC_ERRCAUSE(t0)
sw zero, MC_ERRADDR(t0)
/* Set clock ratio to 1:1 */
li t1, 0x03 /* clkrat=1:1, rddel=3 */
sw t1, MC_IOGP(t0)
/* Clear Power-down registers */
sw zero, MC_SELFRFSH(t0)
/* Set CAS Latency */
li t1, 0x00000020 /* CL = 2 */
sw t1, MC_MRSCODE(t0)
/* Set word width to 16 bit */
li t1, 0x2
sw t1, MC_CFGDW(t0)
/* Set CS0 to SDRAM parameters */
li t1, 0x000014C9
sw t1, MC_CFGPB0(t0)
/* Set SDRAM latency parameters */
li t1, 0x00026325 /* BC PC100 */
sw t1, MC_LATENCY(t0)
/* Set SDRAM refresh rate */
li t1, 0x00000C30 /* 4K/64ms @ 100MHz */
sw t1, MC_TREFRESH(t0)
/* Finally enable the controller */
li t1, 1
sw t1, MC_CTRLENA(t0)
j ra
nop
