/*
* Copyright (c) 2016 Andreas Färber
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
#include <dt-bindings/clock/gxbb-clkc.h>
#include <dt-bindings/clock/gxbb-aoclkc.h>
#include <dt-bindings/reset/gxbb-aoclkc.h>
/ {
compatible = "amlogic,meson-gxbb";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <0x2>;
#size-cells = <0x0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
};
};
arm-pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
firmware {
sm: secure-monitor {
compatible = "amlogic,meson-gxbb-sm";
};
};
efuse: efuse {
compatible = "amlogic,meson-gxbb-efuse";
#address-cells = <1>;
#size-cells = <1>;
sn: sn@14 {
reg = <0x14 0x10>;
};
eth_mac: eth_mac@34 {
reg = <0x34 0x10>;
};
bid: bid@46 {
reg = <0x46 0x30>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
};
xtal: xtal-clk {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "xtal";
#clock-cells = <0>;
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
usb0_phy: phy@c0000000 {
compatible = "amlogic,meson-gxbb-usb2-phy";
#phy-cells = <0>;
reg = <0x0 0xc0000000 0x0 0x20>;
resets = <&reset RESET_USB_OTG>;
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
clock-names = "usb_general", "usb";
status = "disabled";
};
usb1_phy: phy@c0000020 {
compatible = "amlogic,meson-gxbb-usb2-phy";
#phy-cells = <0>;
reg = <0x0 0xc0000020 0x0 0x20>;
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
clock-names = "usb_general", "usb";
status = "disabled";
};
cbus: cbus@c1100000 {
compatible = "simple-bus";
reg = <0x0 0xc1100000 0x0 0x100000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
reset: reset-controller@4404 {
compatible = "amlogic,meson-gxbb-reset";
reg = <0x0 0x04404 0x0 0x20>;
#reset-cells = <1>;
};
uart_A: serial@84c0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x84c0 0x0 0x14>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
uart_B: serial@84dc {
compatible = "amlogic,meson-uart";
reg = <0x0 0x84dc 0x0 0x14>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
pwm_ab: pwm@8550 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x08550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
pwm_cd: pwm@8650 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x08650 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
pwm_ef: pwm@86c0 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x086c0 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
uart_C: serial@8700 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x8700 0x0 0x14>;
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
watchdog@98d0 {
compatible = "amlogic,meson-gxbb-wdt";
reg = <0x0 0x098d0 0x0 0x10>;
clocks = <&xtal>;
};
spifc: spi@8c80 {
compatible = "amlogic,meson-gxbb-spifc";
reg = <0x0 0x08c80 0x0 0x80>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clkc CLKID_SPI>;
status = "disabled";
};
i2c_A: i2c@8500 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x08500 0x0 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_B: i2c@87c0 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087c0 0x0 0x20>;
interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_C: i2c@87e0 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087e0 0x0 0x20>;
interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
gic: interrupt-controller@c4301000 {
compatible = "arm,gic-400";
reg = <0x0 0xc4301000 0 0x1000>,
<0x0 0xc4302000 0 0x2000>,
<0x0 0xc4304000 0 0x2000>,
<0x0 0xc4306000 0 0x2000>;
interrupt-controller;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
#interrupt-cells = <3>;
#address-cells = <0>;
};
aobus: aobus@c8100000 {
compatible = "simple-bus";
reg = <0x0 0xc8100000 0x0 0x100000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
pinctrl_aobus: pinctrl@14 {
compatible = "amlogic,meson-gxbb-aobus-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio_ao: bank@14 {
reg = <0x0 0x00014 0x0 0x8>,
<0x0 0x0002c 0x0 0x4>,
<0x0 0x00024 0x0 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
};
};
remote_input_ao_pins: remote_input_ao {
mux {
groups = "remote_input_ao";
function = "remote_input_ao";
};
};
i2c_ao_pins: i2c_ao {
mux {
groups = "i2c_sck_ao",
"i2c_sda_ao";
function = "i2c_ao";
};
};
pwm_ao_a_3_pins: pwm_ao_a_3 {
mux {
groups = "pwm_ao_a_3";
function = "pwm_ao_a_3";
};
};
pwm_ao_a_6_pins: pwm_ao_a_6 {
mux {
groups = "pwm_ao_a_6";
function = "pwm_ao_a_6";
};
};
pwm_ao_a_12_pins: pwm_ao_a_12 {
mux {
groups = "pwm_ao_a_12";
function = "pwm_ao_a_12";
};
};
pwm_ao_b_pins: pwm_ao_b {
mux {
groups = "pwm_ao_b";
function = "pwm_ao_b";
};
};
};
clkc_AO: clock-controller@040 {
compatible = "amlogic,gxbb-aoclkc";
reg = <0x0 0x00040 0x0 0x4>;
#clock-cells = <1>;
#reset-cells = <1>;
};
uart_AO: serial@4c0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x004c0 0x0 0x14>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
ir: ir@580 {
compatible = "amlogic,meson-gxbb-ir";
reg = <0x0 0x00580 0x0 0x40>;
interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
pwm_ab_AO: pwm@550 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x0550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
i2c_AO: i2c@500 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x500 0x0 0x20>;
interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_AO_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
periphs: periphs@c8834000 {
compatible = "simple-bus";
reg = <0x0 0xc8834000 0x0 0x2000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
rng {
compatible = "amlogic,meson-rng";
reg = <0x0 0x0 0x0 0x4>;
};
pinctrl_periphs: pinctrl@4b0 {
compatible = "amlogic,meson-gxbb-periphs-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio: bank@4b0 {
reg = <0x0 0x004b0 0x0 0x28>,
<0x0 0x004e8 0x0 0x14>,
<0x0 0x00120 0x0 0x14>,
<0x0 0x00430 0x0 0x40>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
emmc_pins: emmc {
mux {
groups = "emmc_nand_d07",
"emmc_cmd",
"emmc_clk";
function = "emmc";
};
};
nor_pins: nor {
mux {
groups = "nor_d",
"nor_q",
"nor_c",
"nor_cs";
function = "nor";
};
};
sdcard_pins: sdcard {
mux {
groups = "sdcard_d0",
"sdcard_d1",
"sdcard_d2",
"sdcard_d3",
"sdcard_cmd",
"sdcard_clk";
function = "sdcard";
};
};
sdio_pins: sdio {
mux {
groups = "sdio_d0",
"sdio_d1",
"sdio_d2",
"sdio_d3",
"sdio_cmd",
"sdio_clk";
function = "sdio";
};
};
sdio_irq_pins: sdio_irq {
mux {
groups = "sdio_irq";
function = "sdio";
};
};
uart_a_pins: uart_a {
mux {
groups = "uart_tx_a",
"uart_rx_a";
function = "uart_a";
};
};
uart_b_pins: uart_b {
mux {
groups = "uart_tx_b",
"uart_rx_b";
function = "uart_b";
};
};
uart_c_pins: uart_c {
mux {
groups = "uart_tx_c",
"uart_rx_c";
function = "uart_c";
};
};
i2c_a_pins: i2c_a {
mux {
groups = "i2c_sck_a",
"i2c_sda_a";
function = "i2c_a";
};
};
i2c_b_pins: i2c_b {
mux {
groups = "i2c_sck_b",
"i2c_sda_b";
function = "i2c_b";
};
};
i2c_c_pins: i2c_c {
mux {
groups = "i2c_sck_c",
"i2c_sda_c";
function = "i2c_c";
};
};
eth_pins: eth_c {
mux {
groups = "eth_mdio",
"eth_mdc",
"eth_clk_rx_clk",
"eth_rx_dv",
"eth_rxd0",
"eth_rxd1",
"eth_rxd2",
"eth_rxd3",
"eth_rgmii_tx_clk",
"eth_tx_en",
"eth_txd0",
"eth_txd1",
"eth_txd2",
"eth_txd3";
function = "eth";
};
};
pwm_a_x_pins: pwm_a_x {
mux {
groups = "pwm_a_x";
function = "pwm_a_x";
};
};
pwm_a_y_pins: pwm_a_y {
mux {
groups = "pwm_a_y";
function = "pwm_a_y";
};
};
pwm_b_pins: pwm_b {
mux {
groups = "pwm_b";
function = "pwm_b";
};
};
pwm_d_pins: pwm_d {
mux {
groups = "pwm_d";
function = "pwm_d";
};
};
pwm_e_pins: pwm_e {
mux {
groups = "pwm_e";
function = "pwm_e";
};
};
pwm_f_x_pins: pwm_f_x {
mux {
groups = "pwm_f_x";
function = "pwm_f_x";
};
};
pwm_f_y_pins: pwm_f_y {
mux {
groups = "pwm_f_y";
function = "pwm_f_y";
};
};
};
};
hiubus: hiubus@c883c000 {
compatible = "simple-bus";
reg = <0x0 0xc883c000 0x0 0x2000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
clkc: clock-controller@0 {
compatible = "amlogic,gxbb-clkc";
#clock-cells = <1>;
reg = <0x0 0x0 0x0 0x3db>;
};
mailbox: mailbox@404 {
compatible = "amlogic,meson-gxbb-mhu";
reg = <0 0x404 0 0x4c>;
interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
<0 209 IRQ_TYPE_EDGE_RISING>,
<0 210 IRQ_TYPE_EDGE_RISING>;
#mbox-cells = <1>;
};
};
apb: apb@d0000000 {
compatible = "simple-bus";
reg = <0x0 0xd0000000 0x0 0x200000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
};
usb0: usb@c9000000 {
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
reg = <0x0 0xc9000000 0x0 0x40000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
clock-names = "otg";
phys = <&usb0_phy>;
phy-names = "usb2-phy";
dr_mode = "host";
status = "disabled";
};
usb1: usb@c9100000 {
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
reg = <0x0 0xc9100000 0x0 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
clock-names = "otg";
phys = <&usb1_phy>;
phy-names = "usb2-phy";
dr_mode = "host";
status = "disabled";
};
ethmac: ethernet@c9410000 {
compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
reg = <0x0 0xc9410000 0x0 0x10000
0x0 0xc8834540 0x0 0x4>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
<&clkc CLKID_MPLL2>;
clock-names = "stmmaceth", "clkin0", "clkin1";
phy-mode = "rgmii";
status = "disabled";
};
};
};
