/*
* BSD LICENSE
*
* Copyright (c) 2015 Broadcom. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Broadcom Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/bcm-ns2.h>
/ {
compatible = "brcm,ns2";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <2>;
#size-cells = <0>;
A57_0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0 0>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
};
A57_1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0 1>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
};
A57_2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0 2>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
};
A57_3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0 3>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
};
CLUSTER0_L2: l2-cache@000 {
compatible = "cache";
};
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
IRQ_TYPE_EDGE_RISING)>,
<GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) |
IRQ_TYPE_EDGE_RISING)>,
<GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) |
IRQ_TYPE_EDGE_RISING)>,
<GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) |
IRQ_TYPE_EDGE_RISING)>;
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&A57_0>,
<&A57_1>,
<&A57_2>,
<&A57_3>;
};
pcie0: pcie@20020000 {
compatible = "brcm,iproc-pcie";
reg = <0 0x20020000 0 0x1000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 281 IRQ_TYPE_NONE>;
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x83000000 0 0x00000000 0 0x00000000 0 0x20000000>;
brcm,pcie-ob;
brcm,pcie-ob-oarr-size;
brcm,pcie-ob-axi-offset = <0x00000000>;
brcm,pcie-ob-window-size = <256>;
status = "disabled";
msi-parent = <&msi0>;
msi0: msi@20020000 {
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 277 IRQ_TYPE_NONE>,
<GIC_SPI 278 IRQ_TYPE_NONE>,
<GIC_SPI 279 IRQ_TYPE_NONE>,
<GIC_SPI 280 IRQ_TYPE_NONE>;
brcm,num-eq-region = <1>;
brcm,num-msi-msg-region = <1>;
};
};
pcie4: pcie@50020000 {
compatible = "brcm,iproc-pcie";
reg = <0 0x50020000 0 0x1000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 305 IRQ_TYPE_NONE>;
linux,pci-domain = <4>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x83000000 0 0x00000000 0 0x30000000 0 0x20000000>;
brcm,pcie-ob;
brcm,pcie-ob-oarr-size;
brcm,pcie-ob-axi-offset = <0x30000000>;
brcm,pcie-ob-window-size = <256>;
status = "disabled";
msi-parent = <&msi4>;
msi4: msi@50020000 {
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 301 IRQ_TYPE_NONE>,
<GIC_SPI 302 IRQ_TYPE_NONE>,
<GIC_SPI 303 IRQ_TYPE_NONE>,
<GIC_SPI 304 IRQ_TYPE_NONE>;
};
};
soc: soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
#include "ns2-clock.dtsi"
dma0: dma@61360000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x61360000 0x1000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
clocks = <&iprocslow>;
clock-names = "apb_pclk";
};
smmu: mmu@64000000 {
compatible = "arm,mmu-500";
reg = <0x64000000 0x40000>;
#global-interrupts = <2>;
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
mmu-masters;
};
pinctrl: pinctrl@6501d130 {
compatible = "brcm,ns2-pinmux";
reg = <0x6501d130 0x08>,
<0x660a0028 0x04>,
<0x660009b0 0x40>;
};
gpio_aon: gpio@65024800 {
compatible = "brcm,iproc-gpio";
reg = <0x65024800 0x50>,
<0x65024008 0x18>;
ngpios = <6>;
#gpio-cells = <2>;
gpio-controller;
};
gic: interrupt-controller@65210000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x65210000 0x1000>,
<0x65220000 0x1000>,
<0x65240000 0x2000>,
<0x65260000 0x1000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
IRQ_TYPE_LEVEL_HIGH)>;
};
cci@65590000 {
compatible = "arm,cci-400";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x65590000 0x1000>;
ranges = <0 0x65590000 0x10000>;
pmu@9000 {
compatible = "arm,cci-400-pmu,r1",
"arm,cci-400-pmu";
reg = <0x9000 0x4000>;
interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
};
};
mdio_mux_iproc: mdio-mux@6602023c {
compatible = "brcm,mdio-mux-iproc";
reg = <0x6602023c 0x14>;
#address-cells = <1>;
#size-cells = <0>;
mdio@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
pci_phy0: pci-phy@0 {
compatible = "brcm,ns2-pcie-phy";
reg = <0x0>;
#phy-cells = <0>;
status = "disabled";
};
};
mdio@7 {
reg = <0x7>;
#address-cells = <1>;
#size-cells = <0>;
pci_phy1: pci-phy@0 {
compatible = "brcm,ns2-pcie-phy";
reg = <0x0>;
#phy-cells = <0>;
status = "disabled";
};
};
mdio@10 {
reg = <0x10>;
#address-cells = <1>;
#size-cells = <0>;
};
};
timer0: timer@66030000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x66030000 0x1000>;
interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>,
<&iprocslow>,
<&iprocslow>;
clock-names = "timer1", "timer2", "apb_pclk";
};
timer1: timer@66040000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x66040000 0x1000>;
interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>,
<&iprocslow>,
<&iprocslow>;
clock-names = "timer1", "timer2", "apb_pclk";
};
timer2: timer@66050000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x66050000 0x1000>;
interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>,
<&iprocslow>,
<&iprocslow>;
clock-names = "timer1", "timer2", "apb_pclk";
};
timer3: timer@66060000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x66060000 0x1000>;
interrupts = <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>,
<&iprocslow>,
<&iprocslow>;
clock-names = "timer1", "timer2", "apb_pclk";
};
i2c0: i2c@66080000 {
compatible = "brcm,iproc-i2c";
reg = <0x66080000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 394 IRQ_TYPE_NONE>;
clock-frequency = <100000>;
status = "disabled";
};
wdt0: watchdog@66090000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x66090000 0x1000>;
interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>, <&iprocslow>;
clock-names = "wdogclk", "apb_pclk";
};
gpio_g: gpio@660a0000 {
compatible = "brcm,iproc-gpio";
reg = <0x660a0000 0x50>;
ngpios = <32>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
};
i2c1: i2c@660b0000 {
compatible = "brcm,iproc-i2c";
reg = <0x660b0000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 395 IRQ_TYPE_NONE>;
clock-frequency = <100000>;
status = "disabled";
};
uart0: serial@66100000 {
compatible = "snps,dw-apb-uart";
reg = <0x66100000 0x100>;
interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
uart1: serial@66110000 {
compatible = "snps,dw-apb-uart";
reg = <0x66110000 0x100>;
interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
uart2: serial@66120000 {
compatible = "snps,dw-apb-uart";
reg = <0x66120000 0x100>;
interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
uart3: serial@66130000 {
compatible = "snps,dw-apb-uart";
reg = <0x66130000 0x100>;
interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&osc>;
status = "disabled";
};
ssp0: ssp@66180000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x66180000 0x1000>;
interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>, <&iprocslow>;
clock-names = "spiclk", "apb_pclk";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
ssp1: ssp@66190000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x66190000 0x1000>;
interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>, <&iprocslow>;
clock-names = "spiclk", "apb_pclk";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
hwrng: hwrng@66220000 {
compatible = "brcm,iproc-rng200";
reg = <0x66220000 0x28>;
};
sata_phy: sata_phy@663f0100 {
compatible = "brcm,iproc-ns2-sata-phy";
reg = <0x663f0100 0x1f00>,
<0x663f004c 0x10>;
reg-names = "phy", "phy-ctrl";
#address-cells = <1>;
#size-cells = <0>;
sata_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
status = "disabled";
};
sata_phy1: sata-phy@1 {
reg = <1>;
#phy-cells = <0>;
status = "disabled";
};
};
sata: ahci@663f2000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x663f2000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata0: sata-port@0 {
reg = <0>;
phys = <&sata_phy0>;
phy-names = "sata-phy";
};
sata1: sata-port@1 {
reg = <1>;
phys = <&sata_phy1>;
phy-names = "sata-phy";
};
};
sdio0: sdhci@66420000 {
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x66420000 0x100>;
interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
bus-width = <8>;
clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
status = "disabled";
};
sdio1: sdhci@66430000 {
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x66430000 0x100>;
interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
bus-width = <8>;
clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
status = "disabled";
};
nand: nand@66460000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x66460000 0x600>,
<0x67015408 0x600>,
<0x66460f00 0x20>;
reg-names = "nand", "iproc-idm", "iproc-ext";
interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
brcm,nand-has-wp;
};
};
};
