/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx51.dtsi"
/ {
model = "Freescale i.MX51 Babbage Board";
compatible = "fsl,imx51-babbage", "fsl,imx51";
chosen {
linux,stdout-path = "/soc/aips@70000000/serial@73fbc000";
environment@0 {
compatible = "barebox,environment";
device-path = &esdhc1, "partname:barebox-environment";
};
};
memory {
reg = <0x90000000 0x20000000>;
};
display@di0 {
compatible = "fsl,imx-parallel-display";
crtcs = <&ipu 0>;
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1_1>;
};
display@di1 {
compatible = "fsl,imx-parallel-display";
crtcs = <&ipu 1>;
interface-pix-fmt = "rgb565";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp2_1>;
};
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power Button";
gpios = <&gpio2 21 0>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
};
sound {
compatible = "fsl,imx51-babbage-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx51-babbage-sgtl5000";
ssi-controller = <&ssi2>;
audio-codec = <&sgtl5000>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <2>;
mux-ext-port = <3>;
};
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1_1>;
fsl,cd-controller;
fsl,wp-controller;
status = "okay";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "barebox-environment";
reg = <0x80000 0x20000>;
};
};
&esdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc2_1>;
cd-gpios = <&gpio1 6 0>;
wp-gpios = <&gpio1 5 0>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_1>;
fsl,uart-has-rtscts;
status = "okay";
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
status = "okay";
pmic: mc13892@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mc13892";
spi-max-frequency = <6000000>;
spi-cs-high;
reg = <0>;
interrupt-parent = <&gpio1>;
interrupts = <8 0x4>;
regulators {
sw1_reg: sw1 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1375000>;
regulator-boot-on;
regulator-always-on;
};
sw2_reg: sw2 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1850000>;
regulator-boot-on;
regulator-always-on;
};
sw3_reg: sw3 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1850000>;
regulator-boot-on;
regulator-always-on;
};
sw4_reg: sw4 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1850000>;
regulator-boot-on;
regulator-always-on;
};
vpll_reg: vpll {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
vdig_reg: vdig {
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <1650000>;
regulator-boot-on;
};
vsd_reg: vsd {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3150000>;
};
vusb2_reg: vusb2 {
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <2775000>;
regulator-boot-on;
regulator-always-on;
};
vvideo_reg: vvideo {
regulator-min-microvolt = <2775000>;
regulator-max-microvolt = <2775000>;
};
vaudio_reg: vaudio {
regulator-min-microvolt = <2300000>;
regulator-max-microvolt = <3000000>;
};
vcam_reg: vcam {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <3000000>;
};
vgen1_reg: vgen1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
vgen2_reg: vgen2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3150000>;
regulator-always-on;
};
vgen3_reg: vgen3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
regulator-always-on;
};
};
};
flash: at45db321d@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
spi-max-frequency = <25000000>;
reg = <1>;
partition@0 {
label = "U-Boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "Kernel";
reg = <0x40000 0x3c0000>;
};
};
};
&ssi2 {
fsl,mode = "i2s-slave";
status = "okay";
};
&iim {
barebox,provide-mac-address = <&fec 1 9>;
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
MX51_PAD_GPIO1_0__SD1_CD 0x20d5
MX51_PAD_GPIO1_1__SD1_WP 0x20d5
MX51_PAD_GPIO1_5__GPIO1_5 0x100
MX51_PAD_GPIO1_6__GPIO1_6 0x100
MX51_PAD_EIM_A27__GPIO2_21 0x5
MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
MX51_PAD_EIM_A20__GPIO2_14 0x85
>;
};
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_1>;
fsl,uart-has-rtscts;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_1>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clock-frequency = <26000000>;
VDDA-supply = <&vdig_reg>;
VDDIO-supply = <&vvideo_reg>;
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux_1>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "mii";
status = "okay";
};
&kpp {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_kpp_1>;
linux,keymap = <0x00000067 /* KEY_UP */
0x0001006c /* KEY_DOWN */
0x00020072 /* KEY_VOLUMEDOWN */
0x00030066 /* KEY_HOME */
0x0100006a /* KEY_RIGHT */
0x01010069 /* KEY_LEFT */
0x0102001c /* KEY_ENTER */
0x01030073 /* KEY_VOLUMEUP */
0x02000040 /* KEY_F6 */
0x02010042 /* KEY_F8 */
0x02020043 /* KEY_F9 */
0x02030044 /* KEY_F10 */
0x0300003b /* KEY_F1 */
0x0301003c /* KEY_F2 */
0x0302003d /* KEY_F3 */
0x03030074>; /* KEY_POWER */
status = "okay";
};
