/*
* Copyright 2012 Pengutronix
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx53.dtsi"
#include <arm/imx53.dtsi>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Garz & Fricke VINCELL LT";
compatible = "guf,imx53-vincell-lt", "fsl,imx53";
chosen {
stdout-path = &uart2;
environment {
compatible = "barebox,environment";
device-path = &bareboxenv;
};
};
clocks {
ckih1 {
clock-frequency = <0>;
};
};
panel: panel {
compatible = "giantplus,gpg482739qs5", "simple-panel";
power-supply = <®_panel>;
enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
backlight = <&backlight>;
port {
panel_in: endpoint {
remote-endpoint = <&disp0_out>;
};
};
};
display@di0 {
compatible = "fsl,imx-parallel-display";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp0>;
crtcs = <&ipu 0>;
interface-pix-fmt = "bgr24";
status = "okay";
fsl,panel = <&panel>;
port@0 {
disp0_in: endpoint {
remote-endpoint = <&ipu_di0_disp0>;
};
};
port@1 {
disp0_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 50000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <&ldo3>;
enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
backlight-boot-off;
};
regulators {
compatible = "simple-bus";
reg_3p2v: 3p2v {
compatible = "regulator-fixed";
regulator-name = "3P2V";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-always-on;
};
reg_panel: vdd-panel {
compatible = "regulator-fixed";
regulator-name = "VDD_PANEL";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 20 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usbotg: vbus-otg {
compatible = "regulator-fixed";
regulator-name = "VBUS_OTG";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
};
reg_usbh1: vbus-h1 {
compatible = "regulator-fixed";
regulator-name = "VBUS_H1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
bitrate = <100000>;
status = "okay";
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
};
pmic: dialog@48 { /* DA9053-3HHA1 PMIC */
compatible = "dlg,da9053-aa", "dlg,da9052";
reg = <0x48>;
interrupt-parent = <&gpio7>;
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
regulators {
buck1 { /* CORE */
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2075000>;
regulator-always-on;
regulator-boot-on;
};
buck2 { /* PRO */
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2075000>;
regulator-always-on;
regulator-boot-on;
};
buck3 { /* MEM */
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck4 { /* PERI */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
regulator-boot-on;
};
ldo1 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
ldo2 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
ldo3: ldo3 {
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
ldo4 {
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <2775000>;
regulator-always-on;
regulator-boot-on;
};
ldo5 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
ldo6 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
ldo7 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <2750000>;
regulator-always-on;
regulator-boot-on;
};
ldo8 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo9 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
ldo10 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
};
};
temperature-sensor@49 {
compatible = "ti,lm73";
reg = <0x49>;
};
eeprom@50 {
compatible = "atmel,24c32", "st,m24c32";
reg = <0x50>;
pagesize = <1>;
status = "okay";
};
rtc: nxp@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
bitrate = <100000>;
status = "disabled";
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
touch: edt-ft5x06@38 {
compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
reg = <0x38>;
interrupt-parent = <&gpio2>;
interrupts = <14 0>;
};
};
&ipu_di0_disp0 {
remote-endpoint = <&disp0_in>;
};
/* RS485 --> X39 [13..14] */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
/* RTS via GPIO */
fsl,uart-has-rtscts;
rs485-enabled;
gpio = <&gpio7 7 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
vbus-supply = <®_usbotg>;
status = "okay";
};
&usbh1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1>;
status = "okay";
};
/* Serial debug console --> X39 [2..5] */
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
/* Serial debug console --> X11 [5..7] */
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1>;
status = "okay";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
status = "okay";
};
&nfc {
#address-cells = <1>;
#size-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
nand-bus-width = <8>;
nand-ecc-mode = "hw";
nand-on-flash-bbt;
status = "okay";
partition@0 {
label = "barebox";
reg = <0x0 0xe0000>;
};
bareboxenv: partition@e0000 {
label = "barebox-environment";
reg = <0xe0000 0x20000>;
};
partition@100000 {
label = "ubi";
reg = <0x100000 0x0>;
};
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
imx53-vincell-lt {
pinctrl_can1: can1grp {
fsl,pins = <
MX53_PAD_GPIO_7__CAN1_TXCAN 0x00000000
MX53_PAD_GPIO_8__CAN1_RXCAN 0x000001c4
>;
};
pinctrl_hog: hoggrp {
fsl,pins = <
MX53_PAD_EIM_A25__EMI_WEIM_A_25 0x000000e4
MX53_PAD_EIM_A22__EMI_WEIM_A_22 0x000000e4
MX53_PAD_EIM_D16__EMI_WEIM_D_16 0x000000a4
MX53_PAD_EIM_D17__EMI_WEIM_D_17 0x000000a4
MX53_PAD_EIM_D18__EMI_WEIM_D_18 0x000000a4
MX53_PAD_EIM_D19__EMI_WEIM_D_19 0x000000a4
MX53_PAD_EIM_D20__EMI_WEIM_D_20 0x000000a4
MX53_PAD_EIM_D21__EMI_WEIM_D_21 0x000000a4
MX53_PAD_EIM_D22__EMI_WEIM_D_22 0x000000a4
MX53_PAD_EIM_D23__EMI_WEIM_D_23 0x000000a4
MX53_PAD_EIM_D24__EMI_WEIM_D_24 0x000000a4
MX53_PAD_EIM_D25__EMI_WEIM_D_25 0x000000a4
MX53_PAD_EIM_D26__EMI_WEIM_D_26 0x000000a4
MX53_PAD_EIM_D27__EMI_WEIM_D_27 0x000000a4
MX53_PAD_EIM_D28__EMI_WEIM_D_28 0x000000a4
MX53_PAD_EIM_D29__EMI_WEIM_D_29 0x000000a4
MX53_PAD_EIM_D30__EMI_WEIM_D_30 0x000000a4
MX53_PAD_EIM_D31__EMI_WEIM_D_31 0x000000a4
MX53_PAD_EIM_A24__EMI_WEIM_A_24 0x000001e4
MX53_PAD_EIM_A23__EMI_WEIM_A_23 0x000001e4
MX53_PAD_EIM_A22__EMI_WEIM_A_22 0x000000e4
MX53_PAD_EIM_A21__EMI_WEIM_A_21 0x000000e4
MX53_PAD_EIM_A20__EMI_WEIM_A_20 0x000000a4
MX53_PAD_EIM_A19__EMI_WEIM_A_19 0x000000a4
MX53_PAD_EIM_A18__EMI_WEIM_A_18 0x000000a4
MX53_PAD_EIM_A17__EMI_WEIM_A_17 0x000000a4
MX53_PAD_EIM_A16__EMI_WEIM_A_16 0x000000a4
MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 0x000000a4
MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 0x000000e4
MX53_PAD_EIM_OE__EMI_WEIM_OE 0x000000a4
MX53_PAD_EIM_RW__EMI_WEIM_RW 0x000000a4
MX53_PAD_EIM_LBA__EMI_WEIM_LBA 0x000000e4
MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 0x000000a4
MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 0x000000a4
MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 0x000001e4
MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 0x000001e4
MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT 0x000000e0
MX53_PAD_LVDS0_TX3_P__GPIO7_22 0x80000000
MX53_PAD_LVDS0_CLK_P__GPIO7_24 0x80000000
MX53_PAD_LVDS0_TX2_P__GPIO7_26 0x80000000
MX53_PAD_LVDS0_TX1_P__GPIO7_28 0x80000000
MX53_PAD_LVDS0_TX0_P__GPIO7_30 0x80000000
MX53_PAD_GPIO_1__GPIO1_1 0x000001c4
MX53_PAD_GPIO_2__GPIO1_2 0x000001c4
MX53_PAD_GPIO_10__GPIO4_0 0x000005e5
MX53_PAD_GPIO_11__GPIO4_1 0x000005c5
MX53_PAD_GPIO_12__GPIO4_2 0x000005e5
MX53_PAD_GPIO_13__GPIO4_3 0x000005e5
MX53_PAD_GPIO_14__GPIO4_4 0x000005e5
MX53_PAD_GPIO_16__GPIO7_11 0x000001c4
MX53_PAD_KEY_ROW2__GPIO4_11 0x000001e4
MX53_PAD_PATA_DATA8__GPIO2_8 0x000001e4
MX53_PAD_PATA_DATA12__PATA_DATA_12 0x000001e4
MX53_PAD_PATA_DA_0__PATA_DA_0 0x000001e4
/* UART5: MDB --> X39 [2..5] (shared with RS232) */
MX53_PAD_PATA_DATA9__GPIO2_9 0x00000000 /* MDB_WAKEUP_OUT */
/* UART3: RS485 --> X39 */
MX53_PAD_PATA_DA_1__GPIO7_7 0x00000000 /* RS485_TX_EN */
MX53_PAD_PATA_DATA4__GPIO2_4 0x00000000 /* FEC_nINT */
/* LCD panel */
MX53_PAD_DI0_PIN4__GPIO4_20 0x000004c4 /* lcd power */
MX53_PAD_PATA_DATA2__GPIO2_2 0x00000000 /* backlight power */
MX53_PAD_PATA_DATA5__GPIO2_5 0x00000020 /* lcd enable */
MX53_PAD_GPIO_9__PWM1_PWMO 0x00000000 /* LCD backlight PWM1 out */
/* ESDHC1 */
MX53_PAD_PATA_DATA6__GPIO2_6 0x00000000 /* ESDHC1 CD */
/* I2C system bus */
/* MX53_PAD_CSI0_DAT8__GPIO5_26 0x00000000 */
/* MX53_PAD_CSI0_DAT9__GPIO5_27 */
/* I2C external touch interface, disabled */
/* MX53_PAD_GPIO_5__GPIO1_50x80000000 */
/* MX53_PAD_GPIO_6__GPIO1_60x80000000 */
/* External Touch */
MX53_PAD_PATA_DATA13__GPIO2_13 0x00000000 /* TOUCH_RESET */
MX53_PAD_PATA_DATA14__GPIO2_14 0x00000000 /* TOUCH_INT */
MX53_PAD_PATA_DATA15__GPIO2_15 0x00000000 /* TOUCH_WAKE */
/* Audio */
MX53_PAD_PATA_DATA7__GPIO2_7 0x00000000 /* Speaker on */
/* Clockout for external USB-phy and audiocodec */
MX53_PAD_GPIO_3__CCM_CLKO2 0x00000000
/* GPIOs on keypad connector (X21) */
MX53_PAD_CSI0_DAT11__GPIO5_29 0x00000000 /* Pin 3 */
MX53_PAD_PATA_DIOW__GPIO6_17 0x00000000 /* Pin 4 */
MX53_PAD_SD2_CMD__GPIO1_11 0x00000000 /* Pin 5 */
MX53_PAD_PATA_DMACK__GPIO6_18 0x00000000 /* Pin 6 */
MX53_PAD_CSI0_DAT7__GPIO5_25 0x00000000 /* Pin 7 */
MX53_PAD_GPIO_4__GPIO1_4 0x00000000 /* Pin 8 */
MX53_PAD_KEY_ROW4__GPIO4_15 0x00000000 /* Pin 9 */
MX53_PAD_KEY_COL4__GPIO4_14 0x00000000 /* Pin 10 */
MX53_PAD_KEY_ROW3__GPIO4_13 0x00000000 /* Pin 11 */
MX53_PAD_KEY_COL3__GPIO4_12 0x00000000 /* Pin 12 */
MX53_PAD_GPIO_19__GPIO4_5 0x00000000 /* Pin 13 */
MX53_PAD_KEY_COL2__GPIO4_10 0x00000000 /* Pin 14 */
MX53_PAD_KEY_COL1__GPIO4_8 0x00000000 /* Pin 15 */
MX53_PAD_KEY_ROW0__GPIO4_7 0x00000000 /* Pin 16 */
MX53_PAD_KEY_COL0__GPIO4_6 0x00000000 /* Pin 17 */
MX53_PAD_KEY_ROW1__GPIO4_9 0x00000000 /* Pin 18 */
MX53_PAD_GPIO_17__GPIO7_12 0x000000e0 /* PMIC_nIRQ, 100 KOhm pull up */
>;
};
pinctrl_disp0: disp0grp {
fsl,pins = <
MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x000004c1
MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x000004c1
MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x000004c5
MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x000004c5
MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x000004c3
MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x000004c3
MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x000004c3
MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x000004c3
MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x000004c3
MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x000004c3
MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x000004c3
MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x000004c3
MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x000004c3
MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x000004c3
MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x000004c3
MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x000004c3
MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x000004c3
MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x000004c3
MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x000004c3
MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x000004c3
MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x000004c3
MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x000004c3
MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x000004c3
MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x000004c3
MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x000004c3
MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x000004c3
MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x000004c3
MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x000004c3
>;
};
pinctrl_nand: nandgrp {
fsl,pins = <
MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x00000004
MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x00000004
MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x00000004
MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x00000004
MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0x000000e4
MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0x000000e0
MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x00000004
MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 0x000001e4
MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 0x000001e4
MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 0x000001e4
MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x000000a4
MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x000000a4
MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x000000a4
MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x000000a4
MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x000000a4
MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x000000a4
MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x000000a4
MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 0x000000a4
MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 0x000000e4
MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 0x000000e4
MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 0x000000e4
MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 0x000000e4
MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 0x000000e4
MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 0x000000e4
MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 0x000000e4
MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 0x000000e4
>;
};
pinctrl_usbh1: usbh1grp {
fsl,pins = <
MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x00000000 /* OC */
MX53_PAD_GPIO_0__USBOH3_USBH1_PWR 0x00000000 /* PWR_EN */
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x00000084 /* OC */
/* can not be used, odd transistor logic */
MX53_PAD_CSI0_MCLK__GPIO5_19 0x00000000 /* PWR_EN */
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5
MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5
MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000
MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
>;
};
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x80000000
MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x80000000
MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x80000000
MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x80000000
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
>;
};
pinctrl_uart5: uart5grp {
fsl,pins = <
MX53_PAD_CSI0_DAT14__UART5_TXD_MUX 0x1c5
MX53_PAD_CSI0_DAT15__UART5_RXD_MUX 0x1c5
MX53_PAD_CSI0_DAT18__UART5_RTS 0x1c5
MX53_PAD_CSI0_DAT19__UART5_CTS 0x1c5
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1c5
MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1c5
MX53_PAD_CSI0_DAT16__UART4_RTS 0x1c5
MX53_PAD_CSI0_DAT17__UART4_CTS 0x1c5
>;
};
};
};
