/*
* Copyright 2013 Texas Instruments, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/gpio.h>
#include "skeleton.dtsi"
/ {
model = "Texas Instruments Keystone 2 SoC";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&gic>;
aliases {
serial0 = &uart0;
};
memory {
reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
};
gic: interrupt-controller {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x02561000 0x0 0x1000>,
<0x0 0x02562000 0x0 0x2000>,
<0x0 0x02564000 0x0 0x1000>,
<0x0 0x02566000 0x0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_HIGH)>;
};
timer {
compatible = "arm,armv7-timer";
interrupts =
<GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
pmu {
compatible = "arm,cortex-a15-pmu";
interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ti,keystone","simple-bus";
interrupt-parent = <&gic>;
ranges = <0x0 0x0 0x0 0xc0000000>;
dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
pllctrl: pll-controller@02310000 {
compatible = "ti,keystone-pllctrl", "syscon";
reg = <0x02310000 0x200>;
};
devctrl: device-state-control@02620000 {
compatible = "ti,keystone-devctrl", "syscon";
reg = <0x02620000 0x1000>;
};
rstctrl: reset-controller {
compatible = "ti,keystone-reset";
ti,syscon-pll = <&pllctrl 0xe4>;
ti,syscon-dev = <&devctrl 0x328>;
ti,wdt-list = <0>;
};
/include/ "keystone-clocks.dtsi"
uart0: serial@02530c00 {
compatible = "ns16550a";
current-speed = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
reg = <0x02530c00 0x100>;
clocks = <&clkuart0>;
interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
};
uart1: serial@02531000 {
compatible = "ns16550a";
current-speed = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
reg = <0x02531000 0x100>;
clocks = <&clkuart1>;
interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
};
i2c0: i2c@2530000 {
compatible = "ti,davinci-i2c";
reg = <0x02530000 0x400>;
clock-frequency = <100000>;
clocks = <&clki2c>;
interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c1: i2c@2530400 {
compatible = "ti,davinci-i2c";
reg = <0x02530400 0x400>;
clock-frequency = <100000>;
clocks = <&clki2c>;
interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c2: i2c@2530800 {
compatible = "ti,davinci-i2c";
reg = <0x02530800 0x400>;
clock-frequency = <100000>;
clocks = <&clki2c>;
interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
};
spi0: spi@21000400 {
compatible = "ti,dm6441-spi";
reg = <0x21000400 0x200>;
num-cs = <4>;
ti,davinci-spi-intr-line = <0>;
interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkspi>;
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@21000600 {
compatible = "ti,dm6441-spi";
reg = <0x21000600 0x200>;
num-cs = <4>;
ti,davinci-spi-intr-line = <0>;
interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkspi>;
#address-cells = <1>;
#size-cells = <0>;
};
spi2: spi@21000800 {
compatible = "ti,dm6441-spi";
reg = <0x21000800 0x200>;
num-cs = <4>;
ti,davinci-spi-intr-line = <0>;
interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkspi>;
#address-cells = <1>;
#size-cells = <0>;
};
usb_phy: usb_phy@2620738 {
compatible = "ti,keystone-usbphy";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x2620738 32>;
status = "disabled";
};
usb: usb@2680000 {
compatible = "ti,keystone-dwc3";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x2680000 0x10000>;
clocks = <&clkusb>;
clock-names = "usb";
interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
ranges;
dma-coherent;
dma-ranges;
status = "disabled";
dwc3@2690000 {
compatible = "synopsys,dwc3";
reg = <0x2690000 0x70000>;
interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
usb-phy = <&usb_phy>, <&usb_phy>;
};
};
wdt: wdt@022f0080 {
compatible = "ti,keystone-wdt","ti,davinci-wdt";
reg = <0x022f0080 0x80>;
clocks = <&clkwdtimer0>;
};
clock_event: timer@22f0000 {
compatible = "ti,keystone-timer";
reg = <0x022f0000 0x80>;
interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
clocks = <&clktimer15>;
};
gpio0: gpio@260bf00 {
compatible = "ti,keystone-gpio";
reg = <0x0260bf00 0x100>;
gpio-controller;
#gpio-cells = <2>;
/* HW Interrupts mapped to GPIO pins */
interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkgpio>;
clock-names = "gpio";
ti,ngpio = <32>;
ti,davinci-gpio-unbanked = <32>;
};
aemif: aemif@21000A00 {
compatible = "ti,keystone-aemif", "ti,davinci-aemif";
#address-cells = <2>;
#size-cells = <1>;
clocks = <&clkaemif>;
clock-names = "aemif";
clock-ranges;
reg = <0x21000A00 0x00000100>;
ranges = <0 0 0x30000000 0x10000000
1 0 0x21000A00 0x00000100>;
};
};
};
