Commit cbff8031b491 ("i.MX: clk-pllv3: Do not touch PLL_BYPASS bit")
overreached a bit by removing the code that disables the PLL_BYPASS bit
for all architectures instead of making an exception for Vybrid and
i.MX6SL. This causes the USB controller on i.MX6Q to run at bypass
frequency and fail:

    barebox@Boundary Devices i.MX6 Quad Nitrogen6x Board:/ usb
    usb: USB: scanning bus for devices...
    usb: Bus 001 Device 001: ID 0000:0000 EHCI Host Controller
    imx-usb 2184200.usb: port(0) reset error

This patch adds code to unconditionally disable the PLL_BYPASS bit
initially, when the PLL clocks are registered.

Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Fixes: cbff8031b491 ("i.MX: clk-pllv3: Do not touch PLL_BYPASS bit")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Remove imx_clk_pllv3_locked() which was introduced for the sake of
Vybrid platform. The same effect (waiting on 'locked' bit) can be
achived with vanilla clk_pllv3_enable/disable, which make said
function unnecessary.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Do not touch PLL_BYPASS bit as a part of clk_pll3_enable/disable
execution. For a number of platforms (e.g. Vybrid, i.MX6SL) PLL_BYPASS
is specified as a bit controlling a clock MUX represented by a
dedicated 'struct clk'. Altering that bit as a part of
clk_pll3_enable/disable is equivalent to calling clk_set_parent() and
it makes in the following code:

clk_enable(clk_disable(<some pll>))

change clock chain instead of being a no-op.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add IMX_PLLV3_SYS_VF610 subtype to pllv3 code to be able to control and
re-clock PLL1 and PLL2 on Vybrid SoC. This commit also introduces
imx_clk_pllv3_locked which allows the user to create PLLv3 and specify
how it should be polled for "locked" status (used in .set_rate callback)

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add IMX_PLLV3_USB_VF610 PLLv3 types support clk-pllv3.c

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Move clk code from 'mach-imx' to 'drivers' to keep the code tree
structure closer to that of analogous one from Linux kernel and,
arguably although subjective, to keep 'mach-imx' less cluttered.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>