Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The Zii boards share some functionality across different boards. Add
a common directory, so we can implement this once and use across
different boards.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adds support for the TQ TQMLS1046a board. Currently supported:

- UART
- SD/MMC
- Network on eth3, eth2 currently not working for unknown reasons

First stage support exists but is currently untested. Serdes ports are
not yet supported.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The RDB is the Freescale LS1046a reference board. This patch adds
support for it. Currently supported:

- DDR4 RAM as read from SPD EEPROM
- UART
- SD/MMC
- RGMII network ports

The Serdes ports are currently not supported.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adds initial STMicroelectronics MP1 support along with support
for the DK2 devel board. Only very basic support:

- UART
- SDRAM memory base/size
- No 1st stage support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The phyCORE-i.MX8M aka PCL-066 is a SoM containing a i.MX8M SoC.

phyCORE-i.MX8M:
 - 1GB LPDDR4 RAM
 - eMMC
 - microSD
 - Ethernet

Signed-off-by: Christian Hemp <christian.hemp@posteo.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add support for the following ZII i.MX8MQ based boards:

   - ZII i.MX8MQ RMB3
   - ZII i.MX8MQ Zest

Most of the basic peripherals are supported by this patch. More
advanced features such as PCIe, display support, etc, are planned to
be added later.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Original patch from Uwe Kleine-König, I fixed the
review comments and the imxcfg file to use the udoo neo values.

I also tested the support on the udoo neo full board.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adds support for the AM3517 based WAGO pfc200 SPS.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add support for the Xilinx Zynq Ultrascale+ MPSoC architecture (ZynqMP)
and the Xilinx ZCU104 board.

Barebox is booted as BL33 in EL-1 and expects that a BL2 (i.e. the FSBL)
already took care of initializing the RAM. Also for debug_ll, the UART
is expected to be already setup correctly. Thus, you have to add the
Barebox binary to a boot image as described in "Chapter 11: Boot and
Configuration" of "Zynq Ultrascale+ Device Technical Reference Manual".

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

liteboard is a development board which uses liteSOM as its
base. liteSOM can't exist on its own, but is used as part
of other boards - it only contains processor and memory.

Hardware specification:
 * liteSOM:
   - i.MX6UL
   - 256M or 512M DDR3 RAM
   - eMMC (uSDHC2)
 * Ethernet PHY
 * USB host (usb_otg1)
 * MicroSD slot (uSDHC1)

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The EVB-KSZ9477 is an evaluation board for the KSZ9477 ethernet switch.
This board is equipped with a atsama5d3 SoC with 256MiB of SDRAM, 256MiB
of NAND flash and a SD card slot.

For now only second stage booting is supported with AT91bootstrap as
first stage loader.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ZII RDU1 is a i.MX51 based, Babbagde board derivative supported by
upstream kernel. This commit add support for it to Barebox.

Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Some board designs copy i.MX51 Babbadge board's PMIC design and so
require exactly the same initialization. Move correspoding code into a
separate file so it can be shared.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add support for Advantech i.MX6 SOM named ROM-7421.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Based on feedback from Sascha:
http://lists.infradead.org/pipermail/barebox/2018-January/031796.html
"
Let's just remove this board
instead of ventilating it any further.
"

Remove mmccpu board - and all references to this board.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The i.MX6ull-EVK is a evaluation board for the i.MX6ull from NXP.
The upstream DTS is used, support should be fairly complete:

- 2x fec ethernet
- 1x USB Host
- 1x USB OTG
- 2x SD

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add minimal code to support NXP i.MX7 SABRESD board. Tested to have
working SD card and first Ethernet port as well as being able to boot
upstream Linux kernel (4.12+).

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

This adds preliminary support for the phyCORE i.MX7 module on a
phyBOARD-Zeta baseboard. The DTs will likely change in the future
when PHYTEC finalizes their BSP.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Up to now only 2nd stage booting is tested and boots up to a prompt.
i2c and spi are working, ethernet, usb and sata don't.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adds support for the i.MX6UL Technexion Pico Hobbit. The board
comes with different amounts of RAM. We create one image for the 256MB
and one for the 512MB variant.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
   ---
   v1 -> v2: - removed already prepared clock setup
   v2 -> v3: - added phy-reset-post-delay as the support is now available

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>