Board consists of SoM with stm32mp157c with 4G eMMC and 512M DDR3 RAM.
Carrier board features USB and ETH interfaces and SD card connector.

USB and ETH interfaces not yet operational.

Boot from eMMC requires boot ack bit set.

Device Tree taken from v5 of kernel device tree off mailing list[1].

[1]: https://lore.kernel.org/linux-arm-kernel/20200724145107.35772-3-marcin.sloniewski@gmail.com/

Tested-by: Jookia <contact@jookia.org>
Tested-by: Xogium <contact@xogium.me>
Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adds support for the NXP i.MX8MP-EVK board.

The SDRAM timings are taken from U-Boot-2020.07-rc4, other information
how to initialize the board are form U-Boot as well.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add initial support for 15 i.MX6 based Protonic boards.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adds support for the Linux Automation GmbH MC-1 board built around
the Octavo Systems OSD32MP157C-512M SiP.

The device tree is based on the one in linux-stm32/stm32-next, which
will probably be merged for Linux v5.8-rc1. Instead of waiting that
long, we import it here with some stuff removed/changed, so it's usable
for both barebox and Linux, without the prerequisite patches.

The non-barebox specific parts have been moved into separate DTSIs
(arch/arm/dts/stm32mp{157c-lxa-mc1,15xx-osd32}.dtsi), so both can be
dropped after the v5.8-rc1 sync with only include path change necessary
in arch/arm/dts/stm32mp157c-lxa-mc1.dts.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The Groboards Giant Board is a ATSAMA5D27C-D1G SiP-based SBC.
The board features a 500MHz ARM Cortex-A5 and 128MB DDR2 SDRAM in the
SiP as well as a MicroSD slot on the PCB.

barebox doesn't yet support the sama5d2 SDHCI-variant, so board support
is limited to toggling the LED and interfacing with the UART, but add
this now till the rest may follow. Device tree is based on the vendor's
device-tree available at https://github.com/Groboards/giantboard-tools

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The ATSAMA5D27-SOM1-EK1 is Microchip's evaluation kit for the SAMA5D2
System in Packages (SiPs). The ATSAMA5D27C-D1G-CU SIP embeds 128 MB
of DDR2 DRAM and the SoM has a PMIC, QSPI flash and a 100Mbps PHY.

barebox already supports the sama5d2 clocks, GPIO/Pinctrl, QSPI
controller and Ethernet MAC. Most notable omission is the sama5d2
variant of the SDHCI, which differs from the MCI used by previous AT91
boards, but we kernel boot over the network works, so lets add the board
now and have the SDHCI follow later.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

NETX support has been removed from the Kernel, so there's no point in
supporting it in barebox any longer. Remove the architecture.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This board is produced by Embest/Element 14 and is based on i.MX6 Dual.

For more informations on this board :
http://www.embest-tech.com/shop/star/marsboard.html

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Tested-by: Stefan Lengfeld <contact@stefanchrist.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

To prepare for addition of another ZII i.MX7D based board, i.MX7D
RMU2, rename zii-imx7d-rpu2 to zii-imx7d-dev to avoid any image naming
confusion.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add support for the Digi CCIMX6UL SBC Pro.
It is based on the Digi CCIMX6UL SOM with 256MB RAM and 256MB NAND
flash.

v2:
- fix includes
- rename folder to som
- switch to compressed dtb
- remove the unnecessary get_runtime_offset
all from Ahmad Fatoum

Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The Zii boards share some functionality across different boards. Add
a common directory, so we can implement this once and use across
different boards.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adds support for the TQ TQMLS1046a board. Currently supported:

- UART
- SD/MMC
- Network on eth3, eth2 currently not working for unknown reasons

First stage support exists but is currently untested. Serdes ports are
not yet supported.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The RDB is the Freescale LS1046a reference board. This patch adds
support for it. Currently supported:

- DDR4 RAM as read from SPD EEPROM
- UART
- SD/MMC
- RGMII network ports

The Serdes ports are currently not supported.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adds initial STMicroelectronics MP1 support along with support
for the DK2 devel board. Only very basic support:

- UART
- SDRAM memory base/size
- No 1st stage support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The phyCORE-i.MX8M aka PCL-066 is a SoM containing a i.MX8M SoC.

phyCORE-i.MX8M:
 - 1GB LPDDR4 RAM
 - eMMC
 - microSD
 - Ethernet

Signed-off-by: Christian Hemp <christian.hemp@posteo.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add support for the following ZII i.MX8MQ based boards:

   - ZII i.MX8MQ RMB3
   - ZII i.MX8MQ Zest

Most of the basic peripherals are supported by this patch. More
advanced features such as PCIe, display support, etc, are planned to
be added later.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Original patch from Uwe Kleine-König, I fixed the
review comments and the imxcfg file to use the udoo neo values.

I also tested the support on the udoo neo full board.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adds support for the AM3517 based WAGO pfc200 SPS.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add support for the Xilinx Zynq Ultrascale+ MPSoC architecture (ZynqMP)
and the Xilinx ZCU104 board.

Barebox is booted as BL33 in EL-1 and expects that a BL2 (i.e. the FSBL)
already took care of initializing the RAM. Also for debug_ll, the UART
is expected to be already setup correctly. Thus, you have to add the
Barebox binary to a boot image as described in "Chapter 11: Boot and
Configuration" of "Zynq Ultrascale+ Device Technical Reference Manual".

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

liteboard is a development board which uses liteSOM as its
base. liteSOM can't exist on its own, but is used as part
of other boards - it only contains processor and memory.

Hardware specification:
 * liteSOM:
   - i.MX6UL
   - 256M or 512M DDR3 RAM
   - eMMC (uSDHC2)
 * Ethernet PHY
 * USB host (usb_otg1)
 * MicroSD slot (uSDHC1)

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The EVB-KSZ9477 is an evaluation board for the KSZ9477 ethernet switch.
This board is equipped with a atsama5d3 SoC with 256MiB of SDRAM, 256MiB
of NAND flash and a SD card slot.

For now only second stage booting is supported with AT91bootstrap as
first stage loader.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>