LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch / arm / dts / imx6qdl-phytec-pfla02.dtsi

2018-04-16	c5f5d17 Browse files » ARM: i.MX: phytec-som-imx: Remove kernel and oftree partiton in NAND ... We store kernel and oftree in static UBI volumes now. No need for separate partitions any more. Signed-off-by: Christian Hemp <christian.hemp@gmail.com> Acked-by: Stefan Lengfeld <s.lengfeld@phytec.de> Christian Hemp authored on 3 Dec 2016 Sascha Hauer committed on 16 Apr 2018
2016-05-09	216f412 Browse files » Merge branch 'for-next/imx6-phytec' Sascha Hauer committed on 9 May 2016
2016-05-02	52fdd51 Browse files » ARM: dts: pfla02: use long enough reset for ethernet phy ... Use a longer reset time for ethernet phy Micrel KSZ9031RNX. Otherwise a small percentage of modules have 'transmission timeouts' errors like barebox@Phytec phyFLEX-i.MX6 Quad Carrier-Board:/ ifup eth0 warning: No MAC address set. Using random address 7e:94:4d:02:f8:f3 eth0: 1000Mbps full duplex link detected eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
2016-05-02	6444998 Browse files » imx6qdl-phytec-pfla02.dtsi: add i2c eeprom ... add atmel,24c32 mounted on module Signed-off-by: Jan Remmet <j.remmet@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Remmet authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
2016-04-27	3fb70de Browse files » ARM: i.MX: increase barebox partition sizes ... After doing a 'saveenv' command, it is no longer possible to boot. The reason for this behaviour is that the 'barebox' partition has currently a size of 0x80000 (512 kB), which is not sufficient to store the barebox binary. This causes the 'barebox' and 'barebox-environment' partitions to overlap. Fix this problem by increasing the size of the 'barebox' partition and by placing the 'barebox-environment' right after it. This patch increases the barebox partition for all i.MX boards to 0xe0000 Reported-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Apr 2016
2016-04-27	339ea9f Browse files » ARM: dts: Fix partition names ... Partition names shouldn't be continuously numbered, instead the part behind the '@' should match the reg property. Fix this for all ARM device trees. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Sascha Hauer committed on 27 Apr 2016
2015-08-26	d9f08b0 Browse files » ARM: pfla02: Add module revison detection ... The pin SD4_DAT4 until SD4_DAT7 are used as revison control. The pins will be internally pulled up so we read a 1111 for revison 1. For revison two the first pin (bit) is pulled down (see schematic pfla-02 page 4 "SDIO, NAND-Flash". On Module rev 1 the pins are connected to the NAND but we have only 8bit NAND also the i.MX6 only can handle 8bit NAND flashs. Revisions: Rev 1: 0xF Rev 2: 0xE . . . Rev 15: 0x1 Rev 16: 0x0 Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 4 Oct 2013 Sascha Hauer committed on 26 Aug 2015
2015-08-19	32a07fa Browse files » ARM: pfla02: align with and include mainline DT ... Align with the mainline device tree, include it, and remove all unchanged nodes and properties. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Philipp Zabel authored on 18 Aug 2015 Sascha Hauer committed on 19 Aug 2015
2015-01-28	41e3d1c Browse files » imx6: add partitions on SPI NOR for PFLA02 ... Add partitions oftree and kernel on SPI NOR and increase size of barebox and barebox-environment partition. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 28 Jan 2015 Sascha Hauer committed on 28 Jan 2015
2015-01-28	51eb7dd Browse files » dts:imx6:pfla02: Align nand partitions by 512k ... NAND chip used on phyFLEX-i.MX6 with 4GB NAND (MT29F32G08AFACAWP) has 512k eraseblock size. Align NAND partitions by 512k to fix erase fails. Also increase barebox-environment and oftree partitions to be two eraseblocks. This will ensure safety in case of bad block. Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Dmitry Lavnikevich authored on 27 Jan 2015 Sascha Hauer committed on 28 Jan 2015
2015-01-16	74f042c Browse files » i.MX6: phytec: Allow multiple MMC devices to contain boot environment ... Add code so that when booting from different SDHCI controllers barebox would correctly set up where to look for bootloader environment. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 15 Jan 2015 Sascha Hauer committed on 16 Jan 2015
2014-11-12	96f77e4 Browse files » ARM:pfla02: Move ethernet phy timings to dts ... Move the ethernet phy timinigs to phyFLEX-i.MX6 devicetree. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 11 Nov 2014 Sascha Hauer committed on 12 Nov 2014
2014-09-15	c2a61d7 Browse files » dts:imx6:pfla02: Add env node for SPI-NOR and NAND ... Add environment node for NAND and SPI-NOR Move the environment property to the module file. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 12 Sep 2014 Sascha Hauer committed on 15 Sep 2014
	2d4bbed Browse files » dts:imx6:pfla02:Move spi partitions imx6qdl-phytec-pfla02 ... Move the spi partition definition to imx6qdl-phytec-pfla02.dtsi Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 12 Sep 2014 Sascha Hauer committed on 15 Sep 2014
	bd26cf0 Browse files » dts:imx6:pfla02: move mac read to module ... Move mac read to module. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 12 Sep 2014 Sascha Hauer committed on 15 Sep 2014
	86b4d5e Browse files » dts:imx6:pfla02: Add nand partitions ... Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 12 Sep 2014 Sascha Hauer committed on 15 Sep 2014
2014-09-08	3546ffe Browse files » dts:imx6:pfla02: Fix SPI NOR for phyFLEX-i.MX6 ... Add chip-select property to pfla02 devicetree. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 5 Sep 2014 Sascha Hauer committed on 8 Sep 2014
2014-07-04	d44edfe Browse files » ARM: i.MX6 Phytec phyFLEX: Add watchdog reset workaround ... phyFLEX boards beginning with 1362.2 have a workaround for this i.MX6 bug: ERR006282 ROM code uses nonreset PFDs to generate clocks, which may lead to random boot failures On these boards the SD4_DAT3 pin os connected to the CMIC. The CMIC will reset the board after 10s when the pin isn't toggled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 Jul 2014
2014-03-26	2863149 Browse files » ARM: pfla02: Add support for DualLite and Solo core ... Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Christian Hemp authored on 12 Mar 2014 Sascha Hauer committed on 26 Mar 2014