LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch / arm

2020-04-27	cd24f63 Browse files » treewide: remove references to CREDITS ... The CREDITS file was removed from barebox in 2015 by commit 6570288f2d97 ("Remove the CREDITS file"). Remove references to it from several files. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 23 Apr 2020 Sascha Hauer committed on 27 Apr 2020
2020-04-20	4be9911 Browse files » ARM: dts. i.MX7: add stopgap solution for barebox UART clock breakage ... Commit 8b2104d740 ("driver: Call of_clk_set_defaults for each probed device") made barebox act on the assigned-clock-parents property everywhere, not only for clock provider nodes. This breaks at least the serial console on the i.MX7 SabreSD board; only garbage is output if the patch is not reverted. As stopgap measure, override these properties for all enabled uart nodes in the barebox i.MX7 device tree. This reverts the behavior to what it was like before the offending commit. This is of course no real solution, as obviously Linux was fine dealing with these properties before. But this hack should at least fix the serial console for the boards that were broken in v2020.03.0. When a proper fix follows, this patch can be reverted. Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 15 Apr 2020 Sascha Hauer committed on 20 Apr 2020
2020-04-16	4b91983 Browse files » Merge branch 'for-next/zynq' Sascha Hauer committed on 16 Apr 2020
	711bc44 Browse files » Merge branch 'for-next/zii' Sascha Hauer committed on 16 Apr 2020
	32a4833 Browse files » Merge branch 'for-next/pwm' Sascha Hauer committed on 16 Apr 2020
	049a141 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 16 Apr 2020
	a142fa6 Browse files » Merge branch 'for-next/layerscape' Sascha Hauer committed on 16 Apr 2020
	00a2093 Browse files » Merge branch 'for-next/at91-clk' Sascha Hauer committed on 16 Apr 2020
	5d99f08 Browse files » Merge branch 'for-next/arm' Sascha Hauer committed on 16 Apr 2020
2020-04-15	18afc26 Browse files » clk: at91: port Linux v5.6 SAM9X60 (new ARM926EJ-S) clock support ... During a bug hunt that ultimately turned out unrelated to the state of the barebox at91 clk driver, I synchronized its state with Linux v5.6. Bug fixes and clean up to minimize the diff were split out in separate prior commits. This last commit imports the rest, which is basically support for Microchip's new ARM926EJ-S SoC, the SAM9x60. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 13 Apr 2020 Sascha Hauer committed on 15 Apr 2020
	47475fa Browse files » clk: at91: add sama5d2 audio PLL support ... Commit 7310b976 ("clk: at91: fix compilation errors in sama5d2.c") and follow-up commit ca3077068c ("clk: at91: delete dead i2s/audio code") had deleted the i2s/audio clock related parts of the upstream driver. This was mostly due to unwillingness on my part to understand the code enough for porting them and because I deemed them unnecessary to support in barebox. The former has changed and the latter is not totally true as audio PLL derived clocks may be muxed as inputs for programmable and generated clocks. Port them over and mimize the diff to upstream. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 13 Apr 2020 Sascha Hauer committed on 15 Apr 2020
	b2e6ed0 Browse files » treewide: use cpu_relax() where appropriate ... Instead of doing /* cpu_relax(); */ barrier(); on upstream uses of cpu_relax(), just use the new cpu_relax() #define directly. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 13 Apr 2020 Sascha Hauer committed on 15 Apr 2020
	473a81a Browse files » ARM: include: remove unused <asm/processor.h> ... File has been in source tree for 17 years and is unused. Drop it. The only definition we might want out of the file is cpu_relax(), which we already open code as barrier() with a comment in a couple of places. Move the definition to <linux/barebox-wrapper.h> and drop the file altogether. No functional change. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 13 Apr 2020 Sascha Hauer committed on 15 Apr 2020
2020-04-14	754f35f Browse files » ARM: sm.c: add the attribute 'volatile' to some asm() statements. ... Prevent the compiler to eventually cache register values read/written to/from CP15. Signed-off-by: Giorgio Dal Molin <giorgio.nicole@arcor.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Giorgio Dal Molin authored on 7 Apr 2020 Sascha Hauer committed on 14 Apr 2020
	b1d3023 Browse files » ARM: i.MX: fixed enabling the MMU after switching in non secure mode. ... The Domain Access Control Register (DACR) in CP15 is banked between secure and non secure mode: there a copy of the reg. in secure mode and a second copy in non secure mode. As barebox boots on the imx7 SOC it runs in secure mode and initializes the secure-mode copy of DACR (with 0x00000001). After switching to non secure mode, for example with the command 'smc -n' or while booting a kernel image with global.bootm.secure_state=nonsecure, the active value of DACR is the copy in non-secure mode and that copy was still uninitialized and in an UNKNOWN state. This caused the cpu to hang as soon as the MMU was enabled in non-secure mode. We fix this by reading the DACR value in secure mode just before switching to non secure and then initializing it again with the same value. Signed-off-by: Giorgio Dal Molin <giorgio.nicole@arcor.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Giorgio Dal Molin authored on 7 Apr 2020 Sascha Hauer committed on 14 Apr 2020
	50405ad Browse files » ARM: i.MX: phytec-som-imx6: Fix paths to SPI-NOR partition ... Due to a previously change of the partition namings, the kernel- and oftree-paths in the SPI-bootscript have to be adapted to the changes. The previous change can be found here: commit `72ba815` Signed-off-by: Yunus Bas <y.bas@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Yunus Bas authored on 7 Apr 2020 Sascha Hauer committed on 14 Apr 2020
	fd3728a Browse files » arm: avnet zedboard: turn on mio7 led on startup ... Turns on the LED on MIO7 on the Zedboard to have a signal Signed-off-by: Michael Graichen <michael.graichen@hotmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Graichen authored on 9 Apr 2020 Sascha Hauer committed on 14 Apr 2020
	a959620 Browse files » arm: avnet zedboard: add fpga and pcap clock control ... Added the configuration for FPGA an PCAP clock control Signed-off-by: Michael Graichen <michael.graichen@hotmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Graichen authored on 9 Apr 2020 Sascha Hauer committed on 14 Apr 2020
	a418b8b Browse files » arm: avnet zedboard: fix gem0 mio settings ... fixed GEM0 MIO Settings according to what Vivado says Signed-off-by: Michael Graichen <michael.graichen@hotmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Graichen authored on 9 Apr 2020 Sascha Hauer committed on 14 Apr 2020
2020-04-03	409df4c Browse files » ARM: zii-common: Gate rdu_i210_invm() call with CONFIG_PCI_IMX6 ... There's no reason to have rdu_i210_invm() initcall if CONFIG_PCI_IMX6 is not selected. Add appropriate ifdef to handle that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 31 Mar 2020 Sascha Hauer committed on 3 Apr 2020
	b6adc2e Browse files » ARM: zii-imx7d-rmu2: Add boot source info ... Add boot source info so that RAVE SP driver could query it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 31 Mar 2020 Sascha Hauer committed on 3 Apr 2020
	75abcc0 Browse files » ARM: zii-imx7d-rmu2: Add SPI NOR partition info ... Add SPI NOR partition info necessary for SPI BBU target to work. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 31 Mar 2020 Sascha Hauer committed on 3 Apr 2020
	e703c4f Browse files » ARM: zii-imx7d-dev: Drop redundant RMU2 .dtsi ... The file has made it upstream so we can drop our local copy. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 31 Mar 2020 Sascha Hauer committed on 3 Apr 2020
	d6f2e3e Browse files » ARM: zii-imx8mq-dev: Drop redundant "stdout-path" ... Drop redundant "stdout-path" since it already present in upstream DT. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 31 Mar 2020 Sascha Hauer committed on 3 Apr 2020
	00ffaf8 Browse files » ARM: zii-imx8mq-dev: Add boot source info ... Add boot source info so that RAVE SP driver can properly query it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 31 Mar 2020 Sascha Hauer committed on 3 Apr 2020
	fa70e47 Browse files » ARM: imx8mq: Drop redundant DT nodes ... Drop all of the aliases and themrmal-zone nodes in imx8mq.dtsi since those nodes are now present in upstream DT file. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 31 Mar 2020 Sascha Hauer committed on 3 Apr 2020
	eb76dd3 Browse files » ARM: imx8mq: Drop trailing whitespace ... Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 31 Mar 2020 Sascha Hauer committed on 3 Apr 2020
	8143b4d Browse files » ARM: rdu2: Drop redundant USB GPIO hog nodes ... All of those nodes are already present in upstream DT. Drop them. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 31 Mar 2020 Sascha Hauer committed on 3 Apr 2020
	6edc35a Browse files » ARM: zii-vf610-dev: Add newline to end of board.c ... Add newline to end of board.c so that git doesn't complain. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 31 Mar 2020 Sascha Hauer committed on 3 Apr 2020
	04402b7 Browse files » ARM: zii-imx8mq-dev: Register SD card slot with BBU ... Register SD card slot with BBU. This is really useful for development since this allows to update the bootloader on SD card without having to take it out of the device. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 31 Mar 2020 Sascha Hauer committed on 3 Apr 2020