On 32-bit hosts, UBSan reports:

====================================================================
UBSAN: Undefined behaviour in ./arch/sandbox/board/hostfile.c:135:12
shift exponent 32 is too large for 32-bit type 'long unsigned int'
====================================================================

Fix this by using a unsigned long long for base. The upper 32-bit
won't be set, but device tree fixups can now read them.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

/dev/random can block long after boot time. It seems there's a consensus
that /dev/urandom is safe to use except for very early boot, which isn't
when barebox sandbox is usually run. To make the HWRNG more useful,
always use /dev/urandom.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Linux as well as other operating systems can provide /dev/random and
/dev/urandom device to service userspace need for randomness.
Add a driver to use /dev/random for blocking and /dev/urandom for
non-blocking barebox random numbers.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

When testing things like barebox state in sandbox, it's nice to be able
to refer to a partition on a hostfile by phandle. Support this by
checking for reading the barebox,filename property.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Tap network interface initialization in sandbox
barebox leads to segfault under Debian Buster/Sid.

The problem is that strcpy(dev, ifr.ifr_name) inside
tap_alloc() tries to alter read-only data passed
by tap_probe() and barebox receives SIGSEGV.

Nobody uses network interface name returned
by tap_alloc() so we can drop this strcpy().

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Consoles need to be registered with the "console" device name so that
they are probed by the correct driver. The barebox_register_console()
was already forcing this as it was overwriting the name that was being
passed as argument, but it was failing to provide a unique id for
each new console, so the underlying register_device() would just
return an error when wanting to re-register a device with device name
"console" and id 0.

We remove the unused name parameter from barebox_register_console() as
it is really nowhere used, and also specify DEVICE_ID_DYNAMIC as id,
so that a new unique device id is given to each newly registered
console device.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This replaces the reset_cpu() function which every SoC or board must
provide with registered handlers. This makes it possible to have multiple
reset functions for boards which have multiple ways to reset the machine.
Also boards which have no way at all to reset the machine no longer
have to provide a dummy reset_cpu() function.

The problem this solves is that some machines have external PMICs or
similar to reset the system which have to be preferred over the
internal SoC reset, because the PMIC can reset not only the SoC but also
the external devices.

To pick the right way to reset a machine each handler has a priority. The
default priority is 100 and all currently existing restart handlers are
registered with this priority. of_get_restart_priority() allows to retrieve
the priority from the device tree which makes it possible for boards to
give certain restart handlers a higher priority in order to use this one
instead of the default one.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Use "filename" for the name of the file in the host system, while "devname" for
the device in the sandbox.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

None of the driver make the difference between STDOUT and STDERR.
So we just need to check if putc or getc are filled in the console_device

save 32 bytes on versatilepb

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Conflicts:
	arch/sandbox/mach-sandbox/include/mach/linux.h

This will allow speed up the dev on framebuffer.

By default the resolution is VGA but this can be changed via cmdline.

We use a pthread to Flip the screen every 100ms as we can not detect when
barebox update it as barebox simpliy write in a buffer.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This will crash when use registered bus with device registered to it.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

this will allow to execute a program of the host from barebox

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This has been done with the following script:

find -path ./.git -prune -o -type f -print0 | xargs -0 -r sed -i \
	-e 's/u2boot/barebox/g' \
	-e 's/U2Boot/barebox/g' \
	-e 's/U-boot V2/barebox/g' \
	-e 's/u-boot v2/barebox/g' \
	-e 's/U-Boot V2/barebox/g' \
	-e 's/U-Boot-v2/barebox/g' \
	-e 's/U_BOOT/BAREBOX/g' \
	-e 's/UBOOT/BAREBOX/g' \
	-e 's/uboot/barebox/g' \
	-e 's/u-boot/barebox/g' \
	-e 's/u_boot/barebox/g' \
	-e 's/U-Boot/barebox/g' \
	-e 's/U-boot/barebox/g' \
	-e 's/U-BOOT/barebox/g'

find -path ./.git -prune -o \( -name "*u-boot*" -o -name "*uboot*" -o -name "*u_boot*" \) -print0 | \
	xargs -0 -r rename 's/u[-_]?boot/barebox/'

It needs some manual fixup following in the next patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>