apbh: Use dma_alloc_coherent() to get DMA address ...

Avoid converting virtual address to physical by simple casting by
making use of the fact that dma_alloc_coherent() can already return
that information to us.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

apbh: Do not zero out DMA coherent memory ...

Memory returned by dma_alloc_coherent() should already be zeroed
out, so there's no need to do this explicitly.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dma: apbh: make locally used function static ...

To avoid missing prototype warning.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dma: apbh: Enable clock as a part of probing ...

Enable clock as a part of probing in order to avoid problems on SoCs
that do not have this block ungated out of reset (e.g. i.MX7).

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dma: apbh_dma: add missing array termination ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: replace dev_request_mem_region with dev_request_mem_resource ...

dev_request_mem_region doesn't work properly one some SoCs on which
PTR_ERR() values clash with valid return values from dev_request_mem_region.
Replace them with dev_request_mem_resource where possible.

This patch has been generated with the following semantic patch:

// <smpl>
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
...
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
-	ret = PTR_ERR(io);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
+	ret = PTR_ERR(iores);
...
}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
identifier func;
@@
func(...) {
<+...
struct resource *iores;
-struct resource *iores;
...+>
}
// </smpl>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: use 'const void *' for struct of_device_id.data ...

Since 2011 barebox' of_device_id struct uses unsigned long type for data field:

    struct of_device_id {
            char *compatible;
            unsigned long data;
    };

Almost always struct of_device_id.data field are used as pointer
and need 'unsigned long' casting.

E.g. see 'git grep -A 4 of_device_id drivers/' output:

    drivers/ata/sata-imx.c:static __maybe_unused struct of_device_id imx_sata_dt_ids[] = {
    drivers/ata/sata-imx.c- {
    drivers/ata/sata-imx.c-         .compatible = "fsl,imx6q-ahci",
    drivers/ata/sata-imx.c-         .data = (unsigned long)&data_imx6,
    drivers/ata/sata-imx.c- }, {

Here is of_device_id struct in linux kernel v4.0:

    struct of_device_id {
            char name[32];
            char type[32];
            char compatible[128];
            const void *data;
    };

Changing of_device_id.data type to 'const void *data' will increase
barebox' linux kernel compatibility and decrease number of 'unsigned
long' casts.

Part of the patch was done using the 'coccinelle' tool with the
following semantic patch:

    @rule1@
    identifier dev;
    identifier type;
    identifier func;
    @@
    func(...) {
    <...
    - dev_get_drvdata(dev, (unsigned long *)&type)
    + dev_get_drvdata(dev, (const void **)&type)
    ...>
    }
    @rule2@
    identifier dev;
    identifier type;
    identifier func;
    identifier data;
    @@
    func(...) {
    <...
    - dev_get_drvdata(dev, (unsigned long *)&type->data)
    + dev_get_drvdata(dev, (const void **)&type->data)
    ...>
    }

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: move DMA alloc functions to dma.h ...

This better separates the DMA from the MMU functionality.

Also move all drivers that only depends on asm/mmu.h for the alloc
functions over to the common header.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: change dma_alloc/free_coherent to match other architectures ...

As a lot drivers currently rely on the 1:1 virt->phys mapping on ARM
we define DMA_ADDRESS_BROKEN to mark them. In order to use them on
other architectures with a different mapping they need proper fixing.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let dev_request_mem_region return an error pointer ...

For all users fix or add the error check.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: mxs-nand: Add i.MX6 support ...

The i.MX6 uses the same GPMI NAND controller as i.MX23/28 do. This adds
i.MX6 support to the driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dma: apbh: cleanup includes ...

Several includes are unused, remove them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dma: apbh: add devicetree probe support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dma: apbh: Turn into a driver ...

This converts the apbh driver into a real driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dma: apbh-dma: move header file to common location ...

As the apbh dma engine is also found on i.MX6 move the header file
out of MXS specific directories.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dma: apbh: introduce private struct ...

Currently the apbh driver uses a hardcoded base (MXS_APBH_BASE).
As a first step to clean this up add a private data struct
which is initialized during startup.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: MXS: introduce stmp device support ...

MXS specific devices have some common infrastructure in the kernel
known as STMP devices. We have the same in barebox, but with a
mxs_ prefix instead of a stmp_ prefix. As some STMP devices are
also found on i.MX6 move the common infrastructure out of MXS
specific files and use the stmp_ prefix.

This is done in preparation for i.MX6 NAND support.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Cleanup Kconfig files ...

This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dma: apbh: check for errors when resetting ip core ...

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dma: add mxs-apbh-dma driver ...

Based on the U-Boot version. Changed to kernel style register layout, added
MX23 support, made MMU aware and adapted to barebox.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>