ARM: stm32mp: depend on ARCH_STM32MP for SoC drivers ...

The i2c, MCI and reset controller peripherals are STM32-specific.
There is no reason to ask uses on oldconfig about it, thus make them
depend on ARCH_STM32MP || COMPILE_TEST.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: fix typo in Kconfig default ...

We don't have a config SOC_IMX7D, but have an ARCH_IMX7. Fix this.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: remove duplicate imx8mq-reset.h and use correct defines ...

The defines in the Barebox copy of imx8mq-reset.h had a typo, which has been fixed
in the upstream Linux version of this file. So depending on include ordering the
reset driver using those defines would fail to compile. Use the typo fixed versions
of the define in the driver and remove the duplicate include file, as we also have
the proper upstream version now.

Reported-by: Giorgio Dal Molin <giorgio.nicole@arcor.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: stm32: migrate restart reason and handler from stm32_iwdg ...

The watchdog driver will remain unprobed if the driver or the OF node
is disabled, but the reset reason is useful even then.

System reset and reset source determination is achieved with the RCC
peripheral for which we have a reset controller driver.
Move the code over there, so reset reason and reset are available
always.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: add reset controller driver for STM32 RCC ...

On the STM32MP, reset of the I2C, SPI and USB IPs occurs over the RCC.
This driver adds support for the controller, so it may be reused by
other drivers.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: imx7: Add support for i.MX8MQ IP block variant ...

Port of a Linux commit 34be9b4

  Add bits and pieces needed to support IP block variant found on
  i.MX8MQ SoCs.

  Cc: p.zabel@pengutronix.de
  Cc: Fabio Estevam <fabio.estevam@nxp.com>
  Cc: cphealy@gmail.com
  Cc: l.stach@pengutronix.de
  Cc: Leonard Crestez <leonard.crestez@nxp.com>
  Cc: "A.s. Dong" <aisheng.dong@nxp.com>
  Cc: Richard Zhu <hongxing.zhu@nxp.com>
  Cc: Rob Herring <robh@kernel.org>
  Cc: devicetree@vger.kernel.org
  Cc: linux-imx@nxp.com
  Cc: linux-arm-kernel@lists.infradead.org
  Cc: linux-kernel@vger.kernel.org
  Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: imx7: Add plubming to support multiple IP variants ...

Port of a Linux commit cffaab8

  In order to enable supporting i.MX8MQ with this driver, convert it to
  expect variant specific bits to be passed via driver data.

  Cc: p.zabel@pengutronix.de
  Cc: Fabio Estevam <fabio.estevam@nxp.com>
  Cc: cphealy@gmail.com
  Cc: l.stach@pengutronix.de
  Cc: Leonard Crestez <leonard.crestez@nxp.com>
  Cc: "A.s. Dong" <aisheng.dong@nxp.com>
  Cc: Richard Zhu <hongxing.zhu@nxp.com>
  Cc: Rob Herring <robh@kernel.org>
  Cc: devicetree@vger.kernel.org
  Cc: linux-imx@nxp.com
  Cc: linux-arm-kernel@lists.infradead.org
  Cc: linux-kernel@vger.kernel.org
  Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: Constify "ops" in struct reset_controller_dev ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: Mark local functions as static ...

There are no outside users of of_reset_control_get() or
gpio_reset_control_get(), so mark them as static. This allows us to
avoid "no previous prototype" warning as well.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: Add i.MX7 SRC reset driver ...

Port of a Linux commit abf9775

  Add reset controller driver exposing various reset faculties,
  implemented by System Reset Controller IP block.

  Cc: Lucas Stach <l.stach@pengutronix.de>
  Cc: Mark Rutland <mark.rutland@arm.com>
  Cc: devicetree@vger.kernel.org
  Cc: linux-kernel@vger.kernel.org
  Cc: linux-arm-kernel@lists.infradead.org
  Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
  Acked-by: Rob Herring <robh@kernel.org>
  Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Linux commit 26fce05 was squashed
here as well:

  reset: imx7: Fix always writing bits as 0

  Right now the only user of reset-imx7 is pci-imx6 and the
  reset_control_assert and deassert calls on pciephy_reset don't toggle
  the PCIEPHY_BTN and PCIEPHY_G_RST bits as expected. Fix this by writing
  1 or 0 respectively.

  The reference manual is not very clear regarding SRC_PCIEPHY_RCR but for
  other registers like MIPIPHY and HSICPHY the bits are explicitly
  documented as "1 means assert, 0 means deassert".

  The values are still reversed for IMX7_RESET_PCIE_CTRL_APPS_EN.

  Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
  Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
  Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: socfpga: add missing driver name ...

The driver_d is missing the name property. When the reset driver is used in a
non-of setup, this will result in an error during device_registration where
the dev->name is matched to the driver->name.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: reset-socfpga: sync driver with linux ...

Sync the SoCFPGA reset driver with Linux v4.14-rc1.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: import socfpga-reset driver from linux ...

Port the linux v4.8-rc1 reset-socfpga driver to barebox.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: fix non GPIO reset ...

The reset controller structure is zero initialized in the OF
reset case, but as 0 is also a valid GPIO number the current
code tries to assert/deassert the GPIO instead of calling into
the reset controller device.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: Add gpio reset support ...

If a device has the reset-gpios property we can support this through
the reset controller API, so drivers do not have to open code the
support for this property each time themselves as done a few dozen times
in the kernel.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: Allow dummy reset lines ...

Treat NULL as a dummy reset line which is returned by the reset core
when there is no reset line connected to a device (that is, no
reset is described in the device tree). With this consumers can
just use the reset functions without having to check for existence.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: add reset controller framework ...

Add stripped sown version of the reset controller
framework from the Linux kernel.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>