LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers

2013-05-23	9c56cbb Browse files » fdt: Fix dt memreserve entry ... The fdt reserve map needs address/size values, not address/end values like accidently done for generating the reserve entry for the dt. Reported-by: Jürgen Beisert <j.beisert@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 May 2013
2013-05-06	f0f890a Browse files » clkdev: fix typo ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 5 May 2013 Sascha Hauer committed on 6 May 2013
2013-04-26	57c6458 Browse files » MXS/MCI: don't touch variables in the host structure ... MMC_BUS_WIDTH_* macros do not correspond with the real bus width. After setting a bus width larger than 1 bit the next call to change the frequency ends in the default handler and the host interface stays silently at the previous frequency. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 26 Apr 2013 Sascha Hauer committed on 26 Apr 2013
	9b22b92 Browse files » of: fix typos ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 25 Apr 2013 Sascha Hauer committed on 26 Apr 2013
	97c6363 Browse files » of: fix how an initrd is passed to Linux ... Linux expects linux,initrd-end to contain the first unused address. As this doesn't match the end semantic used by barebox (i.e. end contains the last used address) adding one is necessary. Without this change Linux fails for me to correctly extract a gzipped cpio archive provided as initrd. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 25 Apr 2013 Sascha Hauer committed on 26 Apr 2013
2013-04-12	59dbb4f Browse files » mtdraw: fix oob read and write ... actually ops.ooboffs is not defaulted so when its value gets added to chip->oob_poi in nand_fill_oob or nand_transfer_oob the respective memcpy is using a wrong address. With this patch, both md -s /dev/nandraw0 and cp xyz /dev/nandraw0.sb are working fine on an i.MX28 target (instead of crashing the board). Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 11 Apr 2013 Sascha Hauer committed on 12 Apr 2013
2013-04-09	be78f86 Browse files » mci: Fix bug if probe parameter is omitted ... barebox@Phytec phyCORE-i.MX27:/ mci0.probe= unable to handle NULL pointer dereference at address 0x00000000 pc : [<a7f24700>] lr : [<a7f193f4>] sp : a7fff8e0 ip : 00000000 fp : 00000001 r10: 00000000 r9 : a6ffba8c r8 : 00000000 r7 : a7fffad0 r6 : a6ffbb04 r5 : a6fdd5cc r4 : a6fdd658 r3 : a7f18760 r2 : 00000000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs off FIQs off Mode SVC_32 [<a7f24700>] (simple_strtoul+0xc/0xc0) from [<a7f193f4>] (mci_set_probe+0xc94/0xd64) [<a7f193f4>] (mci_set_probe+0xc94/0xd64) from [<a7f252cc>] (dev_set_param+0x74/0x8c) [<a7f252cc>] (dev_set_param+0x74/0x8c) from [<a7f0606c>] (setenv+0x60/0xd8) [<a7f0606c>] (setenv+0x60/0xd8) from [<a7f00820>] (set_local_var.isra.3+0x5c/0x7c) [<a7f00820>] (set_local_var.isra.3+0x5c/0x7c) from [<a7f01a6c>] (run_list_real+0x494/0x934) [<a7f01a6c>] (run_list_real+0x494/0x934) from [<a7f01400>] (parse_stream_outer+0x198/0x270) [<a7f01400>] (parse_stream_outer+0x198/0x270) from [<a7f0209c>] (run_shell+0x3c/0x7c) [<a7f0209c>] (run_shell+0x3c/0x7c) from [<a7f05494>] (execute_command+0x38/0x78) [<a7f05494>] (execute_command+0x38/0x78) from [<a7f01db8>] (run_list_real+0x7e0/0x934) [<a7f01db8>] (run_list_real+0x7e0/0x934) from [<a7f019ec>] (run_list_real+0x414/0x934) [<a7f39578>] (unwind_backtrace+0x0/0xa8) from [<a7f24ed4>] (panic+0x28/0x3c) [<a7f24ed4>] (panic+0x28/0x3c) from [<a7f39a3c>] (do_exception+0x10/0x14) [<a7f39a3c>] (do_exception+0x10/0x14) from [<a7f39ac8>] (do_data_abort+0x2c/0x38) [<a7f39ac8>] (do_data_abort+0x2c/0x38) from [<a7f39788>] (data_abort+0x48/0x60) Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 7 Apr 2013 Sascha Hauer committed on 9 Apr 2013
2013-04-04	9b1d226 Browse files » net: fec: probe phy_mode from devicetree ... This allows to parse the phy mode from the devicetree. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 Apr 2013
	f72a4fd Browse files » of/net: Add net related of helpers ... of_get_phy_mode to parse the phy mode from the devicetree and of_get_mac_address to parse a MAC address from the devicetree. Directly taken from the Kernel. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 Apr 2013
	0a637bc Browse files » Merge branch 'for-next/zynq' ... Conflicts: arch/arm/Makefile Sascha Hauer committed on 4 Apr 2013
	dd9f6d0 Browse files » Merge branch 'for-next/relocate' ... Conflicts: arch/arm/lib/barebox.lds.S Sascha Hauer committed on 4 Apr 2013
	2143dfd Browse files » Merge branch 'for-next/pr_print' Sascha Hauer committed on 4 Apr 2013
	eebe92e Browse files » Merge branch 'for-next/omap' Sascha Hauer committed on 4 Apr 2013
	c4da776 Browse files » Merge branch 'for-next/oftree' Sascha Hauer committed on 4 Apr 2013
	7086791 Browse files » Merge branch 'for-next/mtd' Sascha Hauer committed on 4 Apr 2013
	45b8792 Browse files » Merge branch 'for-next/misc-arm' Sascha Hauer committed on 4 Apr 2013
	8f2c6a3 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 4 Apr 2013
	4856aee Browse files » Merge branch 'for-next/malloc-all-initcalls' Sascha Hauer committed on 4 Apr 2013
	602a8a6 Browse files » Merge branch 'for-next/fec' Sascha Hauer committed on 4 Apr 2013
	0e291a8 Browse files » Merge branch 'for-next/device-driver-macros' Sascha Hauer committed on 4 Apr 2013
	7845fd7 Browse files » Merge branch 'for-next/clps711x' Sascha Hauer committed on 4 Apr 2013
	7efe415 Browse files » Merge branch 'for-next/clk' Sascha Hauer committed on 4 Apr 2013
	0f38ea3 Browse files » Merge branch 'for-next/ata' Sascha Hauer committed on 4 Apr 2013
2013-04-03	a17aee8 Browse files » mci-core: fix coding style ... Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Hubert Feurstein authored on 2 Apr 2013 Sascha Hauer committed on 3 Apr 2013
	c833347 Browse files » mci-core: use dev_* for messages ... Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Hubert Feurstein authored on 2 Apr 2013 Sascha Hauer committed on 3 Apr 2013
	eb84709 Browse files » clk: remove unused __clk_[get\|put] ... This is some unused code resulting from copying stuff from the kernel. Remove it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Apr 2013
	33552e7 Browse files » net: macb: turn off endian_swp_pkt_en ... The core has a bit for swapping packet data endianism. Reset default from Cadence is off. Xilinx however, that uses this core on the Zynq SoCs, opted for on. Turn it off for all devices. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 3 Apr 2013 Sascha Hauer committed on 3 Apr 2013
	28acd83 Browse files » macb: rename platform data ... The macb/gem core is used by the Zynq SoC. In preparation of sharing the macb driver between at91 and Zynq, rename the platform data to 'struct macb_platform_data', and move the definition to a common location. Signed-off-by: Josh Cartwright <joshc@eso.teric.us> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Josh Cartwright authored on 15 Mar 2013 Sascha Hauer committed on 3 Apr 2013
2013-04-02	977625a Browse files » fb: calculate resource end ... commit 5f03074 changed storing struct resource end insted of size. Fix calculation of end in fb Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Weitzel authored on 28 Mar 2013 Sascha Hauer committed on 2 Apr 2013
2013-03-27	a89e378 Browse files » serial: Add driver for Cadence UART ... Support for Cadence UART core. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 26 Mar 2013 Sascha Hauer committed on 27 Mar 2013