LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / board

2010-05-25	f93bf4f Browse files » pcm043: Fix check for being inside NFC space ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 May 2010
2010-05-18	7b41698 Browse files » eukrea_cpuimx27: allow compilation without LP3972 selected ... Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 17 May 2010 Sascha Hauer committed on 18 May 2010
2010-05-17	33d0633 Browse files » freescale-mx*5-3-stack : fix __flash_header_start ... _start is now exception_vectors since it was rewritten in C (not tested on these boards but compile should fail without this patch) Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Benard authored on 13 May 2010 Sascha Hauer committed on 17 May 2010
	f8541b9 Browse files » imx35pdk: Detect and set silicon and board revision for boot params. ... The kernel for the imx35 pdk doesn't do any detection for board and chip revision. This patch passes the info to the kernel so that v2 boards/chips boot properly. imx35pdk: make COMPARE pad a GPIO1_5 output This pad is an interrupt source, active low for one of the external ICs. fix up/remove unnecessary white space. Signed-off-by: Marc Reilly <marc@cpdesign.com.au> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Reilly authored on 13 May 2010 Sascha Hauer committed on 17 May 2010
	9edb35d Browse files » imx35pdk: correct mode for display contrast pin ... Signed-off-by: Marc Reilly <marc@cpdesign.com.au> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Reilly authored on 13 May 2010 Sascha Hauer committed on 17 May 2010
2010-05-03	9c0c26a Browse files » pcm038: reimplement lowlevel code in C ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 May 2010
	6087daa Browse files » pcm043: reimplement lowlevel code in C ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 May 2010
	e314896 Browse files » fix _update scripts ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 May 2010
	6b17b6d Browse files » i.MX35 stack: Fix mc9sdz60 reset register offset ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 May 2010
	7eb1a15 Browse files » MX25PDK: Add support for 64MiB DDR2 SDRAM ... Newer Freescale 3-Stack development systems are equipped with 64MiB of DDR2 SDRAM, instead of the 128MiB of mDDR SDRAM with which earlier versions were shipped. Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ivo Clarysse authored on 22 Apr 2010 Sascha Hauer committed on 3 May 2010
2010-04-22	94e69bc Browse files » board/pcm038: document value written to ESDCFG0 ... Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 19 Apr 2010 Sascha Hauer committed on 22 Apr 2010
2010-04-12	460904f Browse files » Freescale i.MX35 3stack: Remove comment about LCD power enable. ... Signed-off-by: Marc Reilly <marc@cpdesign.com.au> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> marc authored on 8 Apr 2010 Sascha Hauer committed on 12 Apr 2010
2010-04-12	3aa5197 Browse files » Freescale i.MX35 3stack: Enable power to LCD. ... Changed register names in f3s_pmic_init_all so that they have the same effect with the corrected address values. Signed-off-by: Marc Reilly <marc@cpdesign.com.au> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> marc authored on 8 Apr 2010 Sascha Hauer committed on 12 Apr 2010
2010-04-06	52784a2 Browse files » i.MX35 3stack: fix typo in comment ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Apr 2010
	eed2556 Browse files » Merge branch 'next' Sascha Hauer committed on 6 Apr 2010
	86d1c12 Browse files » i.MX35 3stack: Add a comment about the nonworking display ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Apr 2010
2010-04-02	f5ad084 Browse files » MX21ADS: Support LCD panel ... This patch enabled support for the Sharp QVGA LCD panel of the MX21ADS board. Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ivo Clarysse authored on 1 Apr 2010 Sascha Hauer committed on 2 Apr 2010
2010-03-31	d15dd50 Browse files » MX21ADS: Support booting from NAND ... Support booting an MX21ADS system from NAND. Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ivo Clarysse authored on 22 Mar 2010 Sascha Hauer committed on 31 Mar 2010
2010-03-30	844ca16 Browse files » pcm043: enable l2x0 cache ... Also, initialize the MMU in a postcore_initcall to enable it earlier. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 Mar 2010
2010-03-22	ce24114 Browse files » i.MX25 : fix define name for clock frequency ... CONFIG_MX35_HCLK_FREQ -> CONFIG_MX25_HCLK_FREQ Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Benard authored on 19 Mar 2010 Sascha Hauer committed on 22 Mar 2010
2010-03-11	d1e8284 Browse files » Barebox does not boot on iMX21ADS board ... Barebox crashes during startup, because the SDRAM controller has not been initialized. Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jaccon Bastiaansen authored on 10 Mar 2010 Sascha Hauer committed on 11 Mar 2010
2010-03-03	9569fc3 Browse files » Merge branch 'next' Sascha Hauer committed on 3 Mar 2010
2010-03-03	3b9f0a6 Browse files » pcm038: initialize PLLs from internal RAM ... The PLL setup occasionally fails when the setup code runs from SDRAM, so copy a little assembler helper function to SRAM and execute it there. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Mar 2010
2010-02-26	53eaaf0 Browse files » edb93xx: Fix SDRAM precharge ... edb93xx SDRAM initialization: Issue a precharge all command before forcing the precharge of all SDRAM banks. Write to the SDRAM in order to force a precharge, reading causes the edb93xx boards to hang Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 24 Feb 2010 Sascha Hauer committed on 26 Feb 2010
2010-02-18	7736782 Browse files » Merge branch 'nor' into next Sascha Hauer committed on 18 Feb 2010
2010-02-12	fbff755 Browse files » edb9302(a): Tweak PLL settings ... Previous code ran the edb9302(a) boards with the PLL same settings as the edb9301, at 166MHz core and 66MHz system bus clock. In difference to the edb9301 board the edb9302(a) is equipped with an EP9302 processor, which can be clocked at higher rates than the EP9301. Therefore we can configure the edb9302(a) with the same PLL settings as the other non-edb9301 boards, namely at 200MHz for the core and 100MHz for the system bus clock. Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 11 Feb 2010 Sascha Hauer committed on 12 Feb 2010
2010-02-12	c5b99bc Browse files » edb93xx: Fix SDRAM initialization ... Before programming the SDRAM mode registers, mode register update mode must be selected by setting the MRS bit and clearing INIT in GlConfig Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 10 Feb 2010 Sascha Hauer committed on 12 Feb 2010
2010-02-08	63c194a Browse files » edb93xx: Avoid stack usage in early_udelay() ... edb93xx: The purpose of early_udelay() is to provide delay functionality in the early board setup, when the stack isn't set up yet. With some compiler versions the current implementation makes use of the stack and ends up crashing. Fix this by removing an explicit division from early_udelay() Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 6 Feb 2010 Sascha Hauer committed on 8 Feb 2010
	796bb21 Browse files » edb93xx: Enable UART1 ... edb93xx: according to the datasheet UART1 needs to be enabled explicitly Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 6 Feb 2010 Sascha Hauer committed on 8 Feb 2010
	e6b8bdc Browse files » cfi_flash: move include/cfi_flash.c next to driver ... This file has no useful things for others than the driver, so move it next to the driver and remove the corresponding include from other files. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Feb 2010