LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers

2010-11-26	804e0b0 Browse files » drivers: mci: Fix compilation warning. ... Fix compilation warning: drivers/mci/mci-core.c:1002: warning: comparison of distinct pointer types lacks a cast Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marek Belisko authored on 25 Nov 2010 Sascha Hauer committed on 26 Nov 2010
2010-11-17	c22da7e Browse files » serial_s3c24x0: Add missing brackets. ... Fucntion s3c24x0_serial_flush() could behave wrong because of missing brackets. Correct condition logic. Problem found by sparse. Signed-off-by: Marek Belisko <marek.belisko@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marek Belisko authored on 15 Nov 2010 Sascha Hauer committed on 17 Nov 2010
2010-11-12	f38bfd2 Browse files » fb: set id for framebuffer device correctly ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Nov 2010
2010-10-22	d65ee96 Browse files » doc: fix parameter name in mci-core ... Silence this warning: drivers/mci/mci-core.c:1324: Warning: argument `pdata' of command @param is not found in the argument list of mci_register(struct mci_host host) drivers/mci/mci-core.c:1324: Warning: The following parameters of mci_register(struct mci_host host) are not documented: parameter host Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Schwebel authored on 22 Oct 2010 Sascha Hauer committed on 22 Oct 2010
	13c09da Browse files » mci: align data for commands ... Some mci controllers cannot transfer data with their DMA engines if the data is not sufficiently aligned. Normally this is a driver problem, but hey, we have no problem aligning the data and keep the burden from the drivers. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Juergen Beisert <jbe@pengutronix.de> Acked-by: Juergen Beisert <jbe@pengurtronix.de> Sascha Hauer committed on 22 Oct 2010
	d8eccfd Browse files » fb: i.MX IPU: fold mx3fb_set_par into its only user ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 22 Oct 2010
	5b7a74d Browse files » fb: i.MX IPU: move fb_info initialization to a single function ... The bitfield information was only added to fb_info when the framebuffer actually was enabled. That made it impossible to call 'bmp' before enabling the display. So, move all fb_info init to a single place and make it a function to better allow for multiple displays later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 22 Oct 2010
	889153e Browse files » fb: i.MX IPU: remove unnecessary printf ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 22 Oct 2010
	d339b76 Browse files » mci-core: add multiple block support ... So far only for reading blocks. This is based on the corresponding U-Boot code. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Juergen Beisert <jbe@pengutronix.de> Acked-by: Juergen Beisert <jbe@pengurtronix.de> Sascha Hauer committed on 22 Oct 2010
	fe02628 Browse files » i.MX nand: optimize nand boot code for size ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 22 Oct 2010
2010-10-21	ca5bfba Browse files » i.MX serial: sparse fixes ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 21 Oct 2010
	884273c Browse files » fec_imx: sparse fixes ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 21 Oct 2010
	fe366aa Browse files » Adapt the i.MX23 MCI driver to the v2 i.MX23 patch series ... The i.MX23 v2 architecture patch series was sligthly modified to easify the i.MX28 architecture addition later on. So, we need now an index to query the SSP clock frequency. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 11 Oct 2010 Sascha Hauer committed on 21 Oct 2010
	32fc00e Browse files » Make the clock calculation easier to read and correct ... Due to a wrong rounding while calculating the clock divider the requested clock of 25 MHz resulted into a 48 MHz clock. With this patch a clock frequency below or equal the requested one will be set. By using 'div' and 'rate' as vars, its also easier to check against the data sheet. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 14 Oct 2010 Sascha Hauer committed on 21 Oct 2010
	a9cc5d0 Browse files » fsl_udc: fix warning ... this patch fix the following warning : drivers/usb/gadget/fsl_udc.c: In function 'done': drivers/usb/gadget/fsl_udc.c:566: warning: passing argument 1 of 'dma_inv_range' makes integer from pointer without a cast arch/arm/include/asm/mmu.h:24: note: expected 'long unsigned int' but argument is of type 'void ' drivers/usb/gadget/fsl_udc.c:566: warning: passing argument 2 of 'dma_inv_range' makes integer from pointer without a cast arch/arm/include/asm/mmu.h:24: note: expected 'long unsigned int' but argument is of type 'void ' Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 20 Oct 2010 Sascha Hauer committed on 21 Oct 2010
2010-10-14	9f93d93 Browse files » epautoconf: fix compile error ... this patch fix the following error : CC drivers/usb/gadget/epautoconf.o drivers/usb/gadget/epautoconf.c:33: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'unsigned' drivers/usb/gadget/epautoconf.c: In function 'ep_matches': drivers/usb/gadget/epautoconf.c:168: error: 'epnum' undeclared (first use in this function) drivers/usb/gadget/epautoconf.c:168: error: (Each undeclared identifier is reported only once drivers/usb/gadget/epautoconf.c:168: error: for each function it appears in.) drivers/usb/gadget/epautoconf.c: In function 'usb_ep_autoconfig_reset': drivers/usb/gadget/epautoconf.c:304: error: 'epnum' undeclared (first use in this function) Signed-off-by: Eric Bénard <eric@eukrea.com> Eric Bénard committed on 14 Oct 2010
2010-10-14	7c90164 Browse files » mci-core: add more tested SD Cards ... note : - Transcend 16GiB fails (no log) - Micron 8GiB eMMC fails (hangs after : Detecting a 4.0 revision card) Signed-off-by: Eric Bénard <eric@eukrea.com> Eric Bénard committed on 14 Oct 2010
2010-10-12	23e1399 Browse files » Merge branch 'mx51' into next ... Conflicts: arch/arm/Makefile Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Oct 2010
2010-10-11	c141e5b Browse files » Add the driver for the i.MX23 debug UART ... The i.MX23 comes with a special UART dedicated for debugging purposes. This one is mostly used for the console the user can reach. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Juergen Beisert authored on 11 Oct 2010 Sascha Hauer committed on 11 Oct 2010
	869baba Browse files » mci: mark 'old Canon SD 16 MiB' as working ... This card is working since 'mci: handle SD cards < 2.0 correctly' Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Jürgen Beisert <jbe@pengutronix.de> Juergen Beisert authored on 11 Oct 2010 Sascha Hauer committed on 11 Oct 2010
	082e56d Browse files » imx_serial: Add mx51 support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Oct 2010
	be2be40 Browse files » mci: align write buffer if necessary ... Most SD controllers need some kind of alignment for writing blocks. Instead of coding this in every driver, align write blocks to a 4 byte alignment in the mci layer. For DMA accesses we may need bigger alignment, but let's solve this problem when we have it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Oct 2010
	f78e8f8 Browse files » mci: handle SD cards < 2.0 correctly ... With SD cards older than 2.0 the sd_send_if_cond() fails. Do not assume it's an MMC card in this case. Instead, assume it's a MMC card if sd_send_op_cond() fails. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Oct 2010
	c9ec81e Browse files » mfd mc13892: support reading the revision ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Oct 2010
	44f3c38 Browse files » mfd mc13892: Add spi support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Oct 2010
	17f799e Browse files » move include files for mfd drivers to include/mfd ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Oct 2010
	2ebb440 Browse files » Move mfd drivers to drivers/mfd ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Oct 2010
	8f14d06 Browse files » spi i.MX: Add i.MX51 support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Oct 2010
	a104d0e Browse files » spi i.MX: redirect functions to version specific functions ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Oct 2010
	3e2efa1 Browse files » spi i.MX: add spi version namespace to register defines ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Oct 2010