Correct Kconfig comment for MCI_OMAP_HSMMC to include OMAP3. ...

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'next'

drivers/mtd: fix docg3 write support ...

Fix typo error in MTD_WRITE defines.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers/mtd: fix mtdraw write support ...

When unaligned writes are used, typically doing a cp file /dev/mtdraw0.foo,
the alignement correction code was incorrectly handling such cases, and
didn't return the expected number of written bytes.

This was tested on a 528 block size.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'pu/debug' into next

net: fec_imx: configure FEC for 10Mbit when necessary ...

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: miidev: factor out miidev_get_status() ...

Currently, we can only print the phy_status. Factor out the routine to
get the status, so we can query it from fec drivers and configure
accordingly. Needed because mx28 needs a special bit set for 10Mbit.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: fec_imx: enable payload length check and pause frames ...

Q: "the linux driver add these bits, why not we?"
A: Because nobody activated the bits?

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: fec_imx: refactor R_CNTRL setup ...

Introduce a variable which gets updated when needed and only written
once. Will make further additions easier.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: fec_imx: small cleanups ...

remove double include, remove unused (and double in case of RCNTRL)
defines, sort the includes at least somewhat.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb/gadget: fix poller NPE in early polling ...

The timings of the poller calling have changed, digging out
a latent bug in pxa27x udc controller.
The polling routine is called before the probe function is
called, and the driver internal are not initialized at that
time. This triggers a NULL pointer exception.

Fix it by moving poller registration after driver probe.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx-ipu-fb: Add overlay support ...

Adding overlay support for i.MX3 sdc.

Foreground channel only works when background is also enabled.
The foreground video mode is always the same as the background.

Also added alpha command to set the alpha value of the foreground.

Tested on a phyCORE-i.MX35.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx-ipu-fb: Fix offset for IPU Clock. ...

The offset for the IPU Clock in the CGR1 register is 18 not 22.
See MCIMX35RM table 14-17.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx-ipu-fb: Add support for multiple video modes ...

Make support of multiple video modes possible for i.MX3 boards.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ns16550: fix ier selection ...

The document "PC16550D Universal Asynchronous
Receiver Transmitter with FIFOs" (vers. June 1995,
http://www.national.com/ds/PC/PC16550D.pdf) states
that IER (Interrupt Enable Register) is accessible
if the bit DLAB = 0 (DLAB is bit 7 in LCR; in barebox
DLAB known as LCR_BKSE).

So before IER access we need set DLAB to 0.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ns16550: write zero to ier only once ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ns16550: make ns16550_serial_init_port() shorter ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ns16550: support for UART with broken FIFO ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Revert "mtd omap nand: fix driver without CONFIG_PARAMETER" ...

This reverts commit 7762f96.

already applied by d002818

    fix gpmc_nand_probe without param support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor ...

cherry-picked from U-Boot.

commit 69716c1
Author: Jason Kridner <jkridner@beagleboard.org>
Date:   Wed Apr 20 08:54:16 2011 -0500

    USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor

    Remove __attribute__ ((packed)) to prevent byte access to soc
    registers in some gcc versions.

    Having patches to enable ehci for the BeagleBoard lying around for
    several months, this one was the show-stopper.

    Switched to align(4), rather than remove the attribute, per suggestion
    from Alexander.

    Credits have to go to Laine Walker-Avina <lwalkera@ieee.org> for
    finding the problem.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd omap nand: fix driver without CONFIG_PARAMETER ...

With CONFIG_PARAMETER unset the driver never calls omap_gpmc_eccmode.
Fix it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_nand: disable hardware ecc if not enable ...

allow to save 1360 bytes

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fix gpmc_nand_probe without param support ...

commit 30de24d param: add config to disable it
removes param support for xloader configurations. Set param eccmode calls
omap_gpmc_eccmode and so nand_scan_tail. So nand fails without param support

Call omap_gpmc_eccmode directly if CONFIG_PARAMETER is not enabled
to fix that.

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel/mci: fix slot_b support ...

in commit commit f60f6c58e
atmel_mci: check for device id we use to address the right slot

the driver use the dev_id to detect the slot which is wrong on 9263 as we have
2 devices with 2 slots

use slot_b paramter to specify the slot as done in linux

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'pu/jean-codesize' into next

Merge branch 'master' into next

param: add config to disable it ...

this will allow to save 992 Bytes for TI xlaoder or AT91 bootstrap

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

ioctl: add support for ECCGETSTATS and MEMGETREGIONINFO ...

Support added for ioctl of ECCGETSTATS and MEMGETREGIONINFO.

Fix default handling in core.c to return -EINVAL, if request
was unknown.

Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci_spi: specify hw_dev ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: drop non used at91rm9200 driver ...

we use atmel driver now

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>