environment: Use accessor functions for default environment path ...

default_environment_path only exists when CONFIG_ENV_HANDLING is enabled.
Boards would have to #ifdef this if they wanted to use
default_environment_path. Use accessor functions instead which can
be ifdeffed on a single place.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: find also nodes by mixture of alias and path ...

Let of_find_node_by_path_or_alias also find a node starting with an alias
followed by a path like "i2c0/tps@24"

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: platform: Fix possible crash ...

"dev" may uninitialized or points to incorrect device. While at
it make the message more informative.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: gpio: Fix Kconfig variables to depend on ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/tegra'

Merge branch 'for-next/imx'

gpio: reduce noise when parsing DT ...

Some GPIOs are optional, so it might not be an error if we can not find
a DT property. Do the same thing as the Linux kernel and only print a
debug message not an error.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: gpio: Add Kconfig variable to depend on ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

OF: parse OF clock providers after populate ...

This adds a call to of_clk_init right after platform devices have been
populated.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: fdt: reorder fdt_header initialization ...

No functional change, just reorder the initialization of
the different offset/size members of fdt_header in increasing
order to make it easier to read.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: fdt: Fix fdt size_dt_struct ...

size_dt_struct was calculated too big, we have to substract ofs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: simplify phandle lookup ...

Instead of populating an extra list containing all phandles just iterate
over the whole tree. This is done as preparation for more dynamic devicetrees
where parts are loaded at runtime. Here we don't want to keep the list of
phandles in sync.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: partition: Check for valid partition name ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add missing dependency ENV_HANDLING for OF_BAREBOX_DRIVER option ...

This patch fixes linker error:
  barebox.c:(.text.environment_probe+0x48): undefined reference to `default_environment_path`

Which appears when compiling env-less boards with enabled devicetree.

Signed-off-by: Dmitry Smagin <dmitry.s.smagin@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/boardinfo' ...

Conflicts:
	arch/mips/boards/qemu-malta/init.c
	commands/bootm.c
	drivers/of/base.c

Merge branch 'for-next/of'

of: base: import of_find_node_by_type ...

Import of_find_node_by_type from Linux drivers/of/base.c -
commit id d8dfad3.
This function retrieves a node pointer based on the "device_type"
property of the node.

This is used by device tree update functions in PPC support.

Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

introduce barebox_set_model ...

Instead of calling of_get_model() in barebox_get_model() add a
barebox_set_model() and use it to set the boardinfo once it's
available from the devicetree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: base.c: Use correct device-tree in of_add_initrd() ...

Otherwise only the internal DT is modified, not necessarily the one passed
to the kernel.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: introduce some new helpers ...

of_get_tree_max_phandle - get the maximum phandle of a tree. Needed for
                          creating new phandles without conflicts.
of_node_create_phandle - create a phandle for a node which doesn't have one.
of_find_node_by_alias - find a node by alias name
of_find_node_by_path_or_alias - find a node by full path or alias name
of_find_root_node - find the root node for a given device node

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: default to internal tree in of_find_node_by_path_from ...

So that of_find_node_by_path_from can be used easier.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: parse phandles during unflatten ...

With this node->phandle becomes valid after unflattening a tree
and not during of_probe later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: fix merge mode in of_unflatten_dtb ...

In merge mode a property may be overwritte with new values. When
this happens the length has to be adjusted.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Fix endless loop in of_add_memory ...

of_add_memory is stuck in an endless loop when a memory bank with zero
size is passed. Fix this.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/of' ...

Conflicts:
	arch/arm/boards/freescale-mx53-loco/board.c
	drivers/of/Makefile

Merge branch 'for-next/mtd'

Merge branch 'for-next/marvell' ...

Conflicts:
	arch/arm/boards/Makefile
	arch/arm/dts/Makefile

of: Use dts syntax when printing devicetrees ...

Our devicetree printing is close to correct dts syntax, so fix
some remaining differences:

- Use an equal sign instead of a colon to separate a poperty name and
  a value
- Add a semicolon at the end of properties
- Make sure we do not print a separator for empty properties

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add configurability via devicetree ...

This adds the possibility to configure the place for the environment
from the devicetree and to partition devices from the devicetree.

Configuration has the general form of devices with a regular compatible
property. This allows to later add additional drivers or drivers with
different behaviour (for example to add support for redundant environment).

The configuration is all in the /chosen/barebox/ hierarchy of the
devicetree. This separates the configuration from the hardware
description. Also it makes it possible to store the configuration
in a completely separate devicetree (or devicetree overlay). For
the same reason all configuration is done using nodepathes rather
than phandles.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Add convenience functions to en/disable devicenodes ...

These functions allow to manipulate the "status" property of
devicenodes effectively enabling/disabling devices.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>