completion: fix device parameter completion ...

With device parameter completion the '.' separator between the device
name and the parameter was not handled correctly. For example with
a device named global a completion starting with "g." was completed to
"g.obal.". fix this.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/spd'

Merge branch 'for-next/misc'

Merge branch 'for-next/imx'

Merge branch 'for-next/exitcall'

state: fix missing newline in error message ...

Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: handle write-protection in the raw backend ...

Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PBL: console: Make independent of DEBUG_LL ...

With more stuff being done in PBL regular console support gets more and more
useful. This makes the PBL console independent of DEBUG_LL which is only
meant for early debugging but not regular output.
To use the regular PBL console a board must call pbl_set_putc() which stores
a pointer to the putc function to be used.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: use an EFI variable to save the environment ...

Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: write volatile EFI variables used by systemd ...

LoaderTimeInitUSec and LoaderTimeExecUSec are used e.g. in systemd-analyze
to calculate the time spent in the firmare and barebox.

LoaderDevicePartUUID is used to mount the EFI partition to /boot.

Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: add helper to get the GPT partition UUID for a device ...

Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drop <stddef.h> includes ...

The compilers stddef.h should not be included. We declare all types
ourselves.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

console: When deactivating a console, flush it first ...

Otherwise the last characters may not be sent before deactivating
a console.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

memsize: Compile for PBL aswell ...

Detecting the memory size is a domain for PBL, so compile it for PBL
aswell.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ddr_spd: add routine for printing DDR2 SPD contents in human-readable format ...

---=== SPD EEPROM Information ===---
EEPROM Checksum of bytes 0-62                    OK (0xDF)
Total number of bytes in EEPROM                  256
Fundamental Memory type                          DDR2 SDRAM
SPD Revision                                     1.2

---=== Memory Characteristics ===---
Maximum module speed                             800 MHz (PC2-6400)
Size                                             2048 MB
Banks x Rows x Columns x Bits                    8 x 14 x 10 x 64
Ranks                                            2
SDRAM Device Width                               8 bits
Module Height                                    30.0 mm
Module Type                                      SO-DIMM (67.6 mm)
DRAM Package                                     Planar
Voltage Interface Level                          SSTL 1.8V
Module Configuration Type                        No Parity
Refresh Rate                                     Reduced (7.8 us) - Self Refresh
Supported Burst Lengths                          4, 8
Supported CAS Latencies (tCL)                    6T
tCL-tRCD-tRP-tRAS                                6-6-6-18 as DDR2-800
Minimum Cycle Time                               2.5 ns at CAS 6
Maximum Access Time                              0.40 ns at CAS 6
Maximum Cycle Time (tCK max)                     8 ns

---=== Timing Parameters ===---
Address/Command Setup Time Before Clock (tIS)    0.17 ns
Address/Command Hold Time After Clock (tIH)      0.25 ns
Data Input Setup Time Before Strobe (tDS)        0.05 ns
Data Input Hold Time After Strobe (tDH)          0.12 ns
Minimum Row Precharge Delay (tRP)                15.00 ns
Minimum Row Active to Row Active Delay (tRRD)    7.50 ns
Minimum RAS# to CAS# Delay (tRCD)                15.00 ns
Minimum RAS# Pulse Width (tRAS)                  45.00 ns
Write Recovery Time (tWR)                        15.00 ns
Minimum Write to Read CMD Delay (tWTR)           7.50 ns
Minimum Read to Pre-charge CMD Delay (tRTP)      7.50 ns
Minimum Active to Auto-refresh Delay (tRC)       60.00 ns
Minimum Recovery Delay (tRFC)                    127 ns
Maximum DQS to DQ Skew (tDQSQ)                   0.20 ns
Maximum Read Data Hold Skew (tQHS)               0.30 ns

---=== Manufacturing Information ===---
Manufacturer JEDEC ID                            7f 98 00 00 00 00 00 00
Manufacturing Location Code                      0x05
Part Number
Manufacturing Date                               2014-W47
Assembly Serial Number                           0x43266892

Signed-off-by: Alexander Smirnov <alllecs@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

exitcall: move board_shutdown to exitcall infrastructure ...

Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

exitcall: move arch_shutdown to exitcall infrastructure ...

Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

exitcall: move device_shutdown to exitcall infrastructure ...

Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

exitcall: Add exitcall infrastructure ...

exitcall infrastructure is based on initcall infrastructure.
It allows to have and use exit call hooks on barebox shutdown.

Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: move DDR_SPD to common/Kconfig ...

This patch makes it possible to use ddr_spd-related
routines in any arch not only in ppc.

Signed-off-by: Alexander Smirnov <alllecs@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/blspec'

Merge branch 'for-next/state'

Merge branch 'for-next/mtd' ...

Conflicts:
	drivers/mtd/core.c

Merge branch 'for-next/misc'

Merge branch 'for-next/imx-bbu-nand-fcb' ...

Conflicts:
	common/Kconfig

Merge branch 'for-next/blspec'

treewide: fix 'new blank line at EOF' formatting error ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bbu: Add a standard file-to-device-copy handler ...

The most standard update handler will simply copy a file to a device.
This can be shared across several users, so add a standard handler for
this operation.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

images: Add file size check for PBLX files ...

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: fixup: only export default value during fixup if set ...

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>