ARM: i.MX: central SOC type definition ...

Move the definition of iMX CPU types to an individual file to allow
on-purpose inclusion. Eliminate magic number CPU type encoding in the
scripts/imx subdir using the new include file.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-image: super_root_key command depends on header_version 1 ...

The Super Root Key pointer exclusively exists in flash header version 1
which is used for i.MX25, i.MX35 and i.MX51 SOC as described in freescales
AN4547 document. Simplify the code a little bit.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/imx'

scripts: imx-usb-loader: support set_bits/clear_bits ...

Now that we can use set_bits/clear_bits in the DCD tables, add support
for this in the imx-usb-loader aswell.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-usb-loader: make debug output more useful ...

- print write_memory message only in verbose mode, but in all
  cases when memory is written
- print more information about the DCD section just executed

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx: support set_bits/clear_bits ...

The i.MX SoCs support setting bits and clearing bits in their DCD table.
This adds commands for these in the imx-image tool.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-image: Fix image size in flash header for i.MX35 ...

The i.MX35 needs additional 0x1000 byte. This quirk moved to the wrong
location during refactoring of imx-image for v2016.03.0.

Fixes: adade597593442 ""scripts: imx: Allow to create signed images")
Signed-off-by: Daniel Krueger <daniel.krueger@systec-electronic.com>
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx: imx-image: Fix image size for HABv3 images ...

When the image contains CSF data we must add CSF_LEN to the image
size pointer.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-usb-loader: Do not zero out boot_data_ptr ...

This shouldn't be necessary. So far it didn't hurt either, but now
this invalidates the signature of the image, so keep the image
unmodified.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-image: Allow to create HAB signed images suitable for USB upload ...

For USB upload we must execute the DCD table manually and
invalidate the DCD table in the uploaded image afterwards
to prevent the ROM from executing the DCD data again. Doing this
changes the image and thus also invalidates the signature. To
make HAB signed images suitable for USB upload possible we add an
option to create HAB signed images suitable for USB upload. With
this option the image is created like this:

- The image is created like usual, but with already invalidated DCD
  data (DCD length is set to zero)
- This image is then signed using the CST
- After this the DCD data is made valid (Set DCD length to the real
  length)

imx-usb-loader now finds valid DCD data, executes it and by invalidating
the DCD data it restores the state the image had during signing.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-image: Factor out a read_file function ...

The same code will be used a second time in a followup patch, so
factor out a common function.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-usb-loader: Use dcd len to invalidate dcd data ...

We invalidate the dcd data in the uploaded image since we already
processed it manually. To do so we have set the dcd pointer to 0.
Doing it this way prevents the ROM from executing the HAB code in
debug mode. Use the dcd length instead to invalidate the dcd data.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx: Allow to create signed images ...

This patch allows to call CST directly from imx-image to create signed
images. CST is called whenever the config file contains the hab <str>
commands which means a CSF is generated.
Calling CST requires some quirks. First of all CST returns successfully
whenever a CSF exists, no matter is the CSF actually contains something
sensible or not. So to detect if CST has been called successfully we
have to check if it generated output, not if it returned successfully.
Then CST uses csfsig.bin as a temporary file which breaks when the tool
is called multiple times at once, something which often happens in
parallel builds. We therefore have to lock accesses to this file using
flock().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx: Create CSF files from imx config file ...

This is the first step to support creating signed images directly
with the imx-image tool. i.MX images must be signed using the Freescale
CST tool. CST needs informations already present in the imx-image tool,
so it's convenient to call CST directly from imx-image.
CST takes CSF files (Command Sequence Files) as input. This patch
supports generating CSF files from the imx-image configuration file.
This adds three new commands to the config file:

hab <str>:  All options to the hab command are directly passed through to
            the CSF.
hab_blocks: This generates the "Blocks =" line in the CSF. This is the
            place where the CSF needs information which is contained in
	    the imx-image tool: The image size, the image filename and
	    the load address.
super_root_key <file>: For HABv3 the super root key hash is needed in
                       the i.MX flash header. This command is used to
		       specify the path to the super root key. Needed
		       for HABv3 only.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-image: Support adding a Super Root Key to the image ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-image: pass config data to add_header_* ...

Now that we have a config data struct we can pass it to add_header_*
to reduce the argument count.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-image: move more variables to context data ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx: Drop double check ...

We have the same "if (*line == '\0')" check twice. Remove one of them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-usb-loader: Add -s and -i options ...

Normally imx-usb-loader interprets and executes the DCD table from
an uploaded image and invalidates the DCD before uploading the image
itself to prevent the i.MX ROM code from executing it again. With HAB
signed images this is not possible since invalidating the DCD table
modifies the image which also makes the signature invalid.
To support this usecase add two new options to imx-usb-loader:

The -i option allows to pass in an external config file which can be
used to setup SDRAM. The DCD table in the image can then be made empty
so that the ROM does not see a second SDRAM setup.

The -s option allows to skip interpreting the DCD table in the image.
This may when some setup stuff is still in the images DCD table but
shall be executed by the ROM and not by imx-usb-loader.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx: make libusb variables global ...

No need to pass the libusb context through from function to function.
Make them globally visible.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx: move config file parser to separate file ...

To make the config parser usable by imx-usb-loader also move
it to a separate file.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-image: move check to context data ...

Move the config parsers check function to context data to make
it possible to pass in a different version of this function later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-image: move write_mem to context data ...

Move the config parsers write_mem function to context data to make
it possible to pass in a different version of this function later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-image: Add context struct to config parsers ...

This adds a context struct to the config parser. This is a first
step to make the config parser usable from both imx-image and
imx-usb-loader which will be needed later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx: Consolidate flash headers in imx tools ...

Both imx-image and imx-usb-loader use their own variants of the
i.MX flash header definitions. Consolidate them to avoid code
duplication.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-usb-loader: Move load_file up ...

To avoid forward declaration in a later patch.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-usb-loader: fully read images into memory ...

imx-usb-loader tries to safe memory by reading the image in chunks.
This is unnecessarily complicated. The images are small, so fully read
them into memory and store them in a single buffer. This makes handling
them a lot easier.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-image: Allow dcd offset 0x0 ...

0 is a valid offset for the dcd, so do not use this value to detect
an unset dcd offset. Use 0xffffffff instead.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-usb-loader: Move definitions up ...

The macros are needed earlier in a later patch.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-usb-loader: Make readonly arguments const ...

The buffers passed to dump_long and dump_bytes are not (and shouldn't
be) modified. Make the arguments const.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>