usb: imx: Only use clock when it exists ...

Fixes: bbe0df9

I assumed all chipidea devices actually have a clock. This is true
when looking at the device tree, but in barebox not all i.MX SoCs
use the clocks provided by the device tree. Most instead use
clkdev_add_physbase() to attach a clocks to devices. For these the
chipidea device does not have a clock.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: of_find_node_by_devpath: Fix offset in mtd devices ...

When a cdev is a mtd device the partition offset must be used from
there, not from the cdev.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

HAB: don't reference unused HAB ops ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand_omap_gpmc: fix BCH error correction ...

BCH error detection and correction was only looking at the first
of four syndrome polynomials, which meant it was failing to detect
and correct bitflips in the last 3/4 of the data. In effect, only
the first 512 bytes of a 2048 byte page were being protected by ECC.

The syndrome polynomials (BCH error codes) are stored in the NAND's
OOB, each of which protects 512 bytes of data. The driver used
eccsteps = 1 which effectively made it only use the first polynomial,
and therefore was only protecting the first 512 bytes of the page.

The fix is to pull over a bit of code from the kernel's
omap_correct_data() that sets eccsteps = 4 when the page size is 2048
bytes and hardware ECC is being used.

Signed-off-by: Matt Reimer <mreimer@sdgsystems.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: of: only add partition layout param when GLOBAL support is enabled ...

Fixes: a2fa18f9f483 (mtd: of: Make used partition binding configurable)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/tegra'

Merge branch 'for-next/state'

Merge branch 'for-next/ofpart'

Merge branch 'for-next/nvmem'

Merge branch 'for-next/net'

Merge branch 'for-next/mtd'

Merge branch 'for-next/misc'

Merge branch 'for-next/mips'

Merge branch 'for-next/led'

Merge branch 'for-next/imx'

Merge branch 'for-next/hwrng'

Merge branch 'for-next/efi'

usb: gadget: set otg to peripheral mode on autostart ...

we won't be able to start if otg is not properly configured.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX: hab: Add HAB fusebox related convenience functions / command ...

Secure boot with HAB requires handling of the super root key hash
and actually locking down the device. The related information is
stored in the i.MX fusebox device (IIM on older SoCs, OCOTP on newer
SoCs). This patch adds several convenience functions to store and
read the super root key hash and to lock down a SoC. Also we add
a command to do this from the command line.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

video: ipu: register framebuffer, even when no modes are found ...

When no monitor is connected it might be normal that no modes are found.
Do not bail out with an error in this case, which gives an ugly error
message, but instead still register the framebuffer. This gives the
user a chance to examine it and see that the framebuffer has no modes.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

video: ipu: convert "failed to get modes" message to dev_dbg ...

When no monitor is connected the it's normal for some outputs
that no modes can be found. Convert dev_err to dev_dbg to decrease
the visibility of this message.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: Do not load state during state_new_from_node ...

The caller of state_new_from_node() may have it's own ideas what to
do when loading the state fails, so do not load it in the initialization
function, but instead let the caller do it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: of_path: add of_find_node_by_devpath() ...

We already have of_find_path_by_node() which finds a device path
for a given device node. This is used by the state framework to
find its backend path. This path has to be translated back to
a device node when Linux is started. The current approach turned
out to be too simple: We assumed that the node path is the same
in the tree Linux is started with. This is not true in several
cases:
- partition nodes should have the name "partition@<offset>", but
  in several trees they have "partition@<num>"
- There are two different partition bindings: The legacy binding
  and the new one with an additional partitions subnode which has
  a compatible = "fixed-partitions" property.
The node path only stays the same when the internal tree uses the
same bindings and node names as the tree Linux is started with.

To overcome this limitation we create of_find_node_by_devpath()
which converts the device path back to a device node. It does
so by finding the device node of the hardware device rather than
the partition node. It then parses over the partitions in this
device node with the known bindings looking for a partition which
matches in offset and size to the barebox partition.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: partition: Register the of partition fixup for of partition users ...

at24, at25 and mci core are using of_parse_partitions(). Register the
fixup for them aswell.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: partitions: flag partitions from a partition table ...

We are going to call the of_partition_fixup for regular block
devices like MMC/SD aswell. Add a flag to partitions indicating
they are instanciated from a on-disk partition table so that they
won't be added as device tree partitions during fixup.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: partition: only create partition node when partitions exist ...

With the legacy partition binding we did not modify the device
node when no partition exist, but with the new binding we would
create the "partitions" node with compatible = "fixed-partitions".
Prevent that by catching the absence of partitions early.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: devfs-core: replace DEVFS_IS_PARTITION flag with pointer to the master cdev ...

Instead of having a flag indicating a cdev is a partition on
some master cdev, just add a master pointer to the cdev, so
that we can also find out who the master is.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: partition: Make partition fixup independent from mtd devices ...

The of partition parser is not only used for mtd device, but also
for regular block devices, so make the of_mtd_fixup code independent
of mtd devices also, so that other devices can be fixed up, too.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

watchdog: new driver for Armada XP ...

This SoC uses a variant of the IP that is also used on most other
Marvell SoCs. For now it only supports Armada XP but the naming is
already chosen such that adding support for further SoCs doesn't result
in much renaming.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clocksource: mvebu: don't request the used iomem resource ...

The register ranges of the device nodes timer@20300 and watchdog@20300
overlap, so it is impossible that both devices properly use
request_iomem_region (e.g. by using dev_request_mem_resource). In Linux
only the watchdog driver is registered in /proc/iomem, do the same for
barebox.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>