LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch / mips

2017-10-06	26b4af6 Browse files » MIPS: dts: ar9344: add pll node ... Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 29 Sep 2017 Sascha Hauer committed on 6 Oct 2017
2017-09-20	f5098c4 Browse files » MIPS: dts: ar9344: add APB bus ... and move nodes which belong to APB. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 14 Sep 2017 Sascha Hauer committed on 20 Sep 2017
	d7fdf95 Browse files » MIPS: tplink-wdr4300_defconfig: add network support ... Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 14 Sep 2017 Sascha Hauer committed on 20 Sep 2017
	a93762e Browse files » MIPS: dts: tl_wdr4300: rename it to tl_wdr4300 v1.7 ... The minor version of TP-Link are usually big enough that it need extra vendor partition on the flash with additional configurations like PLL, CPU and RAM freqs. Visually I was able to confirm at least different SPI Flash and RAM chips. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 14 Sep 2017 Sascha Hauer committed on 20 Sep 2017
2017-09-18	130fc67 Browse files » MIPS: dts: tl_wdr4300: remove RO flag from barebox partition ... we need it RW for barebox updates. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 14 Sep 2017 Sascha Hauer committed on 18 Sep 2017
	6f618cd Browse files » MIPS: dts: tl_wdr4300: add alias for spiflash ... to unify the naming with TP-Link TL-MR3020. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 14 Sep 2017 Sascha Hauer committed on 18 Sep 2017
	2cc166f Browse files » MIPS: dts: tl_wdr4300: enable mac0 ... Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 14 Sep 2017 Sascha Hauer committed on 18 Sep 2017
	6877d4f Browse files » MIPS: dts: ar9344: add mac0 node ... this node is supported by ag71xx driver Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 14 Sep 2017 Sascha Hauer committed on 18 Sep 2017
	4864aa9 Browse files » add ar9331.dtsi and enable mac0 ... Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 14 Sep 2017 Sascha Hauer committed on 18 Sep 2017
	266141c Browse files » net: ath79: add ag71xx Ethernet driver ... Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Yegor Yefremov authored on 14 Sep 2017 Sascha Hauer committed on 18 Sep 2017
2017-08-15	62cfa30 Browse files » MIPS: tplink-mr3020.dts: add partition table ... We need partition table for barebox update handler and for barebox environment Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Oleksij Rempel authored on 9 Aug 2017 Lucas Stach committed on 15 Aug 2017
	c688e56 Browse files » MIPS: tplink-mr3020_defconfig: enable more options ... Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Oleksij Rempel authored on 9 Aug 2017 Lucas Stach committed on 15 Aug 2017
	ae3db6e Browse files » MIPS: tplink-mr3020: pbl: move hornet_mips24k_cp0_setup after flash addr test ... this is needed to start zbarebox.bin from running barebox. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Oleksij Rempel authored on 9 Aug 2017 Lucas Stach committed on 15 Aug 2017
	788f16d Browse files » MIPS: tplink-mr3020: pbl: move WMAC init after flash addr test ... if this function is called in the RAM, we won't be able to continue start sequence. It brakes boot over JTAG use case. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Cc: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Oleksij Rempel authored on 9 Aug 2017 Lucas Stach committed on 15 Aug 2017
	91435aa Browse files » MIPS: ath79: add TP-Link WDR4300 board support ... This provides low level initialization of pll and ddr2. Resulting binary should work from SRAM, DDR2 and SPI flash. If started from DDR2 RAM level initialization will skipped. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Oleksij Rempel authored on 9 Aug 2017 Lucas Stach committed on 15 Aug 2017
	196aa5c Browse files » MIPS: ath79: add initial QCA AR9344 SoC support ... According to the documentation: "The AR9344 is a highly integrated and feature-rich IEEE 802.11n 2x2 2.4/5 GHz System-on-a-Chip (SoC) for advanced WLAN platforms. It includes a MIPS 74Kc processor, PCI Express 1.1 Root Complex and Endpoint interfaces, five port IEEE 802.3 Fast Ethernet Switch with MAC/PHY, one MII/RMII/RGMII interface, one USB 2.0 MAC/PHY, and external memory interface for serial Flash, SDRAM, DDR1 or DDR2, I2S/SPDIF-Out audio interface, SLIC VOIP/PCM interface, two UARTs, and GPIOs that can be used for LED controls or other general purpose interface configurations. The AR9344 supports 802.11n operations up to 144 Mbps for 20 MHz and 300 Mbps for 40 MHz respectively, and 802.11a/b/g data rates. Additional features include Maximal Likelihood (ML) decoding, Low-Density Parity Check (LDPC), Maximal Ratio Combining (MRC), Tx Beamforming (TxBF), and On-Chip One-Time Programmable (OTP) memory." Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Oleksij Rempel authored on 9 Aug 2017 Lucas Stach committed on 15 Aug 2017
	1205276 Browse files » MIPS: ath79: provide CONFIG_SOC_QCA_AR9331 option ... QCA AR9331 and QCA AR9344 have some similar part but different uart engines. We need this flag to provide common debug_ll support. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Oleksij Rempel authored on 9 Aug 2017 Lucas Stach committed on 15 Aug 2017
	745aff2 Browse files » MIPS: add virt_to_phys() and phys_to_virt() ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Peter Mamonov <pmamonov@gmail.com> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Antony Pavlov authored on 11 Aug 2017 Lucas Stach committed on 15 Aug 2017
	cdc65ec Browse files » MIPS: ath79: add barebox update handler ... Most of ar93xx SoCs seem to work only with spi. spifash handler should be enough for now. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Oleksij Rempel authored on 9 Aug 2017 Lucas Stach committed on 15 Aug 2017
2017-07-31	6feacdd Browse files » MIPS: add 74Kc info ... This patch is preparation for SoC QCA AR9344 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Oleksij Rempel authored on 27 Jul 2017 Lucas Stach committed on 31 Jul 2017
2017-05-08	8aa6600 Browse files » MIPS: start.S: put entry code into the ".text_entry" section ... The ".text_bare_init" section is not intended to be used for storing entry code. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 5 May 2017 Sascha Hauer committed on 8 May 2017
	1714d54 Browse files » MIPS: barebox.lds.S: put .text_entry contents after _stext and _text ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 5 May 2017 Sascha Hauer committed on 8 May 2017
	a275dba Browse files » MIPS: barebox.lds.S: remove unused got ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 5 May 2017 Sascha Hauer committed on 8 May 2017
	3b77f11 Browse files » MIPS: barebox.lds.S: drop unneeded '_start = .' ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 5 May 2017 Sascha Hauer committed on 8 May 2017
	32ef011 Browse files » MIPS: start*.S: drop redundant .text ... `.text' is equivalent to the `.section .text' directive. The `.text' directive just before `.section ".text_bare_init"' or just before `.section ".text_head_entry"' is redundant so drop it. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 5 May 2017 Sascha Hauer committed on 8 May 2017
2017-03-30	dc24747 Browse files » poweroff: Allow to register poweroff handlers ... Allow to register handlers for poweroff. This allows to have multiple poweroff implementations in a single binary. The implementation is close to the restart handlers. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 Mar 2017
2017-01-11	9172252 Browse files » Merge branch 'for-next/mvebu' Sascha Hauer committed on 11 Jan 2017
2017-01-10	583d99c Browse files » MIPS: qemu-malta_defconfig: set MAX_IMAGE_SIZE = 4 MiB ... If barebox binary image size exceeds the 4 MiB then qemu exits with the 'Could not load MIPS bios' message. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 5 Dec 2016 Sascha Hauer committed on 10 Jan 2017
2017-01-10	9563a02 Browse files » MIPS: drop redundant debug_ll_outhexw macro defines ... The debug_ll_outhexw macro has no dependency on UART model so we can remove it from UART-dependent header files (debug_ll_ns16550.h and mach-ath79/.../debug_ll.h). On the other hand the only debug_ll_outhexw user is MIPS nmon monitor so we can move the debug_ll_outhexw macro to pbl_nmon.h. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 9 Jan 2017 Sascha Hauer committed on 10 Jan 2017
2016-11-14	7e33e8c Browse files » Merge branch 'for-next/mips' Sascha Hauer committed on 14 Nov 2016