Merge branch 'for-next/misc'

Documentation: i.MX: Add missing <soctype> ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: imx: Change block size for 'dd' to 1024 ...

Real image starts at offset 0x400 (1024), so we can skip copying extra
512 bytes of zeros.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

doc: boards: imx: link to mxs documentation ...

Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

doc: bcm283x: update documentation for Raspberry Pi ...

The old way does not seem to work for RPi 3, as the UART pins are
mapped differently and the NOOBS bootcode does not seem to read a
config.txt.

Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX/DCD compiler and interpreter: logic is different ...

Reading the manual more carefully discovers a different logic for the
DCD 'check' command. They use the term "until". In order to get the
manual and the software in sync, this change switches to the term
"until" as well. Changing must happen at compiler and interpreter level
to make it work.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: remove :numbered: from lower level toctrees ...

Only the highest level toctree may have :numbered:, otherwise
sphinxs complains loudly that the subtree is already numbered.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: socfpga: Fix numbered list ...

This is no code block, change to numbered list.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: Change many code blocks to no highlight ...

Several blocks cannot be sensibly highlighted, so change the highliting
to 'none'. Fixes many warnings in building the documentation.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: arm-qemu-vexpress: Fix too short underline ...

Fixes sphinx warning about too short underline.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: add qemu vexpress ...

Add a basic command line for QEMU vexpress.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: add iBASE MI991AF documentation. ...

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: efi: add example how to create EFI partition ...

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/socfpga'

efi: efi: load state from devicetree ...

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Documentation: socfpga: update sequencer documentation ...

Update the documentation in regard of the sequencer importer.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>

docs: mvebu: describe -n more accurately in the sphinx document ...

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

Merge branch 'for-next/imx'

ARM: i.MX6 Wandboard: add Documentation ...

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: move kwboot description to generic mvebu section ...

Expand the generic part about kwboot to the mvebu page and advertise the
parameter -n to make it simpler to boot some machines.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: mvebu can do 2nd stage booting ...

Since commit

	823d08e3e261 ("kwbimage_v1: add support to boot a mvebu image")

barebox can use bootm to load a 2nd barebox image. Update the
documentation accordingly.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: render DIP switches as verbatim text ...

Render images of DIP switches as <pre> html tags/verbatim text. This
fixes the sphinx errors:

    Documentation/boards/imx/Element14-WaRP7.rst:25: ERROR: Malformed table.
    Documentation/boards/imx/Element14-WaRP7.rst:36: ERROR: Malformed table.
    Documentation/boards/imx/Element14-WaRP7.rst:47: ERROR: Malformed table.

Signed-off-by: Stefan Lengfeld <contact@stefanchrist.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: add file suffix rst for inclusion in sphinx documentation ...

Signed-off-by: Stefan Lengfeld <contact@stefanchrist.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: fix hiding of chapter from imx.rst ...

The files 'mxs.rst' and 'imx.rst' used the same chapter headline:

    Freescale i.MXs

This confuses sphinx. It does not support having the same headline at
the same level twice and hides the other chapter. Just rename the
chapter heading to avoid that.

And rename the subchapter headline to 'MXS boards' for clarity.

Signed-off-by: Stefan Lengfeld <contact@stefanchrist.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: update vendor URL for Vincell-LT ...

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX50: Add support for i.MX50 based Amazon Kindle e-book readers ...

The Kindle Model No. D01100 (Kindle Wi-Fi), D01200 (Kindle Touch)
and EY21 (Kindle Paperwhite) are refered as the Kindle 4th and 5th generation.
Those models are based on an i.MX50 SoC and use LPDDR1 or LPDDR2 Memory.

The devices boot in internal boot mode from a build-in eMMC, alternatively
some devices may be set into USB-downloader mode by pressing a specific key
at startup.

Add support for the i.MX50 based Kindle device and make barebox a drop-in
replacement for the factory shipped u-boot image.

Notable features:
- Support for eMMC, USB, UART, I2C, SPI and Keys (except keyboard).
- LPDDR1 and LPDDR2 setup is done via DCD, the same imximage may be used
  for USB-startup and for installation.
- Support for vendor specific ATAGs that are required for the Kindle-System.
- usbserial barebox console access by pressing Select button at startup,
  alternatively full console support on connector J14.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: move x86 efi boot support to x86 arch ...

prepare to drop the efi arch as efi boot up is not arch sepecific

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: Add WaRP7 board support ...

Signed-off-by Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: Add i.MX7 base architecture support ...

Signed-off-by Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>