ARM: imx6qp: fix NoC QoS passthrough for new cpu type functions. ...

On i.MX6QP/DP cpu_mx6_is_mx6q/d do not return true anymore.
Use the new cpu_mx6_is_mx6qp/dp to reenable NoC regulator bypass.

Fixes: d4c05d29d484 ("ARM: i.MX6: Add cpu type for 'plus' variants")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: VFxxx: Record cpu boot source as a part of startup ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: esdctl: Add support for i.MX6SoloX's memory controller ...

Add code needed to dynamically detect the offset and amount of RAM.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/mvebu'

Merge branch 'for-next/misc'

Merge branch 'for-next/mips'

Merge branch 'for-next/imx-ocotp'

Merge branch 'for-next/imx'

Merge branch 'for-next/arm-mmu'

scripts: create a separate section for host tools ...

This allows to enable host tools even if they are not needed for the
current configuration to improve compile coverage and simplify packaging
these tools. The conversion doesn't cover all tools available but can be
extended later.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX8: Add DDRC PHY and DDR CTL base addresses ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: lib64: Make string functions aware of MMU configuration ...

Optimized version of memset() in memset.S if called as:

    memset(foo, 0, size)

will try to explicitly zero out data cache with:

    dc	zva, dst

which will result in Alignement Exception (DABT) if MMU is not
enabled.

For more info see:

    - C4.4.8 "DC ZVA, Data Cache Zero by VA"
    - D5.2.8 "The effects of disabling a stage of address translation"

in "ARM Architecture Reference Manual. ARMv8, for ARMv8-A architecture
profile"

In similar vein, using optimized version of memcpy() could lead to a
unaligned 16-byte write (using 'stp'), which is not allowed for
Device-nGnRnE type of memory (see D5.2.8) and would liead to
Alignement Exception.

To fix both problems expose non-optimized and optimzied versions of
the function and created a wrapper to dispatch the call to either one
based on if MMU is enabled or not.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pinctrl: i.MX: Add support for i.MX8 ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: xload-esdhc: Add support for i.MX8 ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: xload-esdhc: Allow custom buffer address, device offset ...

Add code to support specifying different buffer address and SD/MMC
device offset to read it from in esdhc_start_image(). This change is
needed to support i.MX8.

NOTE: We intentionnaly "emulate" reading at arbitrary offset in
esdhc_start_image() as opposed to implementing it in
esdhc_read_blocks() in order to avoid having to detect if units of
blocks or bytes should be used to specify offset to CMD18.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: xload-esdhc: Rework to make code be less i.MX6-specific ...

Convert imx6_esdhc_start_image() into a generic esdhc_start_image() by
making accept already filled "struct esdhc" as well as use
esdhc_read_blocks().

With that change, create new imx6_esdhc_start_image() whose sole task
is to properly fill a struct esdhc with appropriate offset and to pass
it on to esdhc_start_image().

Both changes are made with a goal of simplifying adding support of new
SoC in mind (see following commits adding support for i.MX8 as example).

NOTE: This commit does not re-implement imx6_esdhc_load_image(),
instead opting for dropping it, due to lack of any users in the
codebase.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: boot: Add trivial i.MX8 support ...

It appears that boot sources for i.MX8 are just a subset of those of
i.MX7 and both can be handled by the same code.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: boot: Fix address casting on 64-bit platforms ...

Add an intermediary casting step in order to avoid casting 32-bit
integer to 64-bit pointer on 64-bit platforms.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX8: Initialize system counter ...

Add code to properly initialize system counter, so it would be posible
to get accurate time delays.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clocksource: armv8-timer: Convert explicit assembly into helpers ...

Move inline assembly related to querying and counter value as well as
getting and setting counter frequency register into asm/system.h as
well as converting it inot helper functions. This is done to make the
code availible to other parts of the system.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: Add constants and helpers for system counter interface ...

Add constants and helpers for system counter interface as can be found
in section "I1.3 Generic Timer registers" of "ARM Architecture
Reference Manual ARMv8, for ARMv8-A architecture"

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: Add basic CCM constants for i.MX8 ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: Add IOMUX pad constants for i.MX8 ...

Ported from U-Boot

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: Split shared CCM code into a separate file ...

Both i.MX8 and i.MX7 have similar CCMs, so move any code that can be
share into a separate file.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

aarch64: Add i.MX8 debug UART support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[andrew.smirnov@gmail.com: Added imx8_uart_setup_ll()]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: include: dma: Add missing no-MMU stubs ...

Add stubs for dma_map_single() and dma_unmap_single() that were needed
for no-MMU build for ARM64 to succeed.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Include our own include/dt-bindings ...

Allow to use dt-bindings files that are not yet upstreamed. They can
be put into include/dt-bindings.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

omap/am33xx_bbu: use file_write_flash() instead of its own variant ...

There are two differences between file_write_flash() and write_image()
(which is removed in this patch):

 - file_write_flash() uses write_full() vs. write() in write_image()
 - file_write_flash() doesn't erase the whole device but only the needed
   space

So the new code should be more robust and maybe even faster.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add builtin firmware support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[andrew.smirnov@gmail.com: Add dummy.o in case directory is empty]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: cache: Remove unused cache ops struct ...

Remove what appears to be a leftover from moving ARMv8 cache function
into a separate file that happened in 4b57aae26 ("ARM: Create own
cache.c file for aarch64")

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>