video: ipuv3: use closest fractional divider ...

Currently the divider is always rounded down, which may lead to a
rather big overshoot of the display clock. Try to match the clock
better by rounding to closest.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bus: omap-gpmc: make locally used function static ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: omap: make locally used functions static ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: musb: Add missing includes ...

phy-am335x.c and phy-am335x-control.c both implement functions that they
do not include the header file providing the prototype for. Add the
missing include and remove the duplicate definition of struct
phy_control.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: Make locally used function static ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: omap: Add header file for bch decoder ...

omap_gpmc_decode_bch() is defined in its user rather than properly in a
header file. Add a header file to be included by both its user and the
file implementing it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net/e1000: Mark e1000_register_invm() static ...

Mark e1000_register_invm() static because it is not used outside the
source file.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net/e1000: Mark e1000_igb_get_flash_size() static ...

Mark e1000_igb_get_flash_size() static because it is not used outside
the source file.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

aiodev: mc13xxx: Mark mc13xxx_adc_do_conversion() static ...

Mark mc13xxx_adc_do_conversion() static because it is not used outside
the source file.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: imx: cpu: avoid use after free on error ...

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

video/ssd1307fb: fix potential memory leak on error ...

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: partition: set ret for error cases ...

looks like it was forgotten.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rtc: ds1307: Set DS1341_BIT_DOSF in the right register ...

DS1341_BIT_DOSF is located in DS1337_REG_STATUS, not
DS1337_REG_CONTROL. Fix the code to reflect that.

Also fix "additionale" -> "additional" typo while at it.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

nand: denali: remove undefined GFP_DMA flag ...

This was a remnant from porting kernel code to barebox.
While being uncritical so far, this will now cause a compiler error
since kzalloc is not a define but a static inline function.

As the kzalloc() 'mode' argument was ignored before and still will be,
it is safe to remove the parameter.

Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX5 clock: add clock provider support ...

Currently it is impossible to get clks with clk_get(&clk, "name");
on the mx5 platform. Change that by adding clk-imx5 as clk_provider.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: When SRSR shows wdog then lookup reset source in wdog ...

On i.MX6 when the watchdog has resetted the system then the SRSR
register correctly shows that the watchdog has resetted the system.
This is not the desired result though, a "reset" in barebox or "reboot"
in Linux should result in "RST" as reset source. So instead of making
the SRSR register value overwrite the reset source read from the
watchdog registers, interpret the SRSR value corresponding to watchdog
reset as "lookup details in the watchdog registers".

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>

mtd: nand: fix nand_lock/unlock() function ...

Do nand reset before write protect check.

If we want to check the WP# low or high through STATUS READ and check bit 7,
we must reset the device, other operation (eg.erase/program a locked block) can
also clear the bit 7 of status register.

As we know the status register can be refreshed, if we do some operation to trigger it,
for example if we do erase/program operation to one block that is locked, then READ STATUS,
the bit 7 of READ STATUS will be 0 indicate the device in write protect, then if we do
erase/program operation to another block that is unlocked, the bit 7 of READ STATUS will
be 1 indicate the device is not write protect.
Suppose we checked the bit 7 of READ STATUS is 0 then judge the WP# is low (write protect),
but in this case the WP# maybe high if we do erase/program operation to a locked block,
so we must reset the device if we want to check the WP# low or high through STATUS READ and
check bit 7.

Signed-off-by: White Ding <bpqw@micron.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
[Cherry-picked from linux: 57d3a9a89a06 mtd: nand: fix nand_lock/unlock() function]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: Print message with pr_err ...

print "already registered" message with pr_err() rather than printf() to
make sure it also appears in the logs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

e1000/flash: Increased erase timeout ...

Serial flash Adesto AT25DF321A specifies the maximal chip erase time as
40 seconds. Extend timeout accordingly.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

video: vpl: make locally used function static ...

of_find_vpl() is only used locally, so make it static.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pinctrl: at91: Add missing include ...

mach/iomux.h provides prototypes for functions that the pinctrl driver
implements, so include it. With this we have a duplicate definition of
enum at91_mux so remove it from the pinctrl driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dma: apbh: make locally used function static ...

To avoid missing prototype warning.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: imx: Avoid missing prototype warnings ...

clk_gate2_free() is unused, so remove it. clk_gate2_alloc() is only
used locally, so make it static.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/usb'

Merge branch 'for-next/state'

Merge branch 'for-next/net-switch-mv88e6xxx'

Merge branch 'for-next/net'

Merge branch 'for-next/mtd'

Merge branch 'for-next/missing-prototypes'

Merge branch 'for-next/misc'