net: ethernet: cpsw: cpsw-phy-sel: Use phandle for phy sel ...

With the usage of the interconnect target module hierarchy in device tree the
cpsw-phy-sel node moved to the system control module. An phandle has
been added instead to the device tree include.

Try to use the cpsw-phy-sel phandle first then fall back looking for the
cpsw-phy-sel child.

This patch is based on the upstream kernel patch:
18eb8aea7fb2 ("net: ethernet: cpsw-phy-sel: prefer phandle for phy sel")

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: of: Add function to enable and register a device by alias ...

In some cases node names are not unique and passing the full path is really long.
So make add a new device by passing the alias string possible.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: bus: Add ti-sysc bus driver ...

Adds minimal support for the sysc interconnect target module found
on many TI SoCs. With this device tree includes have been rearagned.
We need the driver to probe the child devices of the bus.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: designware: fix TX descriptor length corruption ...

dwc_ether_send() sets the SIZE1 field of the TX descriptor incorrectly.
It sets the SIZE1 field to a bit-wise OR of the old value and the new
value.  If the old value differs from the new value, the transmitted
Ethernet frame will be longer than it should be and is likely to have an
incorrect frame check sequence.  As more and more Ethernet frames of
different lengths are sent, more and more of the TX descriptors are
affected (up to a maximum number of CONFIG_TX_DESCR_NUM, defined as 16
in "designware.h").  Fix it by setting the SIZE1 field of the TX
descriptor to just the new value.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Revert "mtd: nand: Kill the chip->scan_bbt() hook" ...

This reverts commit 95ce697.

Merge branch 'for-next/ultrascale'

Merge branch 'for-next/risc-V'

Merge branch 'for-next/pci'

Merge branch 'for-next/net'

Merge branch 'for-next/mtd'

Merge branch 'for-next/mmc'

Merge branch 'for-next/missing-prototypes'

Merge branch 'for-next/misc'

Merge branch 'for-next/kconfig'

Merge branch 'for-next/imx'

Merge branch 'for-next/fastboot'

Merge branch 'for-next/e1000'

Merge branch 'for-next/clps711x'

pinctrl: imx-v3: imx8mq does use the old binding ...

The upstream discussion concluded on using the same binding as
on previous i.MX SoCs.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: imx: sync imx8mq clock driver with upstream kernel ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: imx: add imx8mq composite clock ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: add divider_recalc_rate helper ...

Closer to Linux kernel implementation and needed for imx8mq
composite clock.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: move struct clk_mux into header ...

To make it reusable in a composite clock.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: move struct clk_gate into header ...

To make it reusable in a composite clock.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: core: Fix erase area alignment for non power of 2 erasesize ...

On Thu, Jan 10, 2019 at 09:32:07AM +0100, Sascha Hauer wrote:
> On Wed, Jan 09, 2019 at 12:28:14PM +0100, Ladislav Michl wrote:
> > Devices as AT45DB161 DataFlash uses non power of two page size (528)
> > while present alignment algorithm relies on erasesize being power
> > of 2.
> > Fix that by introducing helper functions rounding to any multiply.
> > Note that logic is sligthly changed to be consistent as ending
> > address is moved forward to include also last byte meant to be
> > erased while previous implementation moved it backward.
> >
> > Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
> > ---
> >  drivers/mtd/core.c     | 28 ++++++++++++++++++++++------
> >  include/linux/kernel.h |  5 +++++
> >  2 files changed, 27 insertions(+), 6 deletions(-)
>
> Applied, thanks

Hi Sascha,

I was searching for paper bag, but was unable to find anything thick
enouh to cover behind :-/ This version is buggy and I noticed right
now when testing on another board. Corrected version follows, which
is also 192 bytes shorter for my ARM target. It seems next branch
at https://git.pengutronix.de/ is not yet updated, so perhaps my fault
won't affect anyone.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: core: Fix erase area alignment for non power of 2 erasesize ...

Devices as AT45DB161 DataFlash uses non power of two page size (528)
while present alignment algorithm relies on erasesize being power
of 2.
Fix that by introducing helper functions rounding to any multiply.
Note that logic is sligthly changed to be consistent as ending
address is moved forward to include also last byte meant to be
erased while previous implementation moved it backward.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: ks8851_mll: fix "no previous prototype for 'ks_enable_qmu'" warning ...

The patch fixes the following compiler's warning:

drivers/net/ks8851_mll.c:438:6: warning: no previous prototype for ‘ks_enable_qmu’ [-Wmissing-prototypes]
 void ks_enable_qmu(struct ks_net *ks)
      ^~~~~~~~~~~~~

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: amba-pl011: fix "no previous prototype for 'pl011_init_port'" warning ...

The patch fixes the following compiler's warning:

drivers/serial/amba-pl011.c:151:5: warning: no previous prototype for ‘pl011_init_port’ [-Wmissing-prototypes]
 int pl011_init_port (struct console_device *cdev)
     ^~~~~~~~~~~~~~~

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

w1: fix "no previous prototype for 'w1_found'" warning ...

The patch fixes the following compiler's warning:

drivers/w1/w1.c:459:6: warning: no previous prototype for ‘w1_found’ [-Wmissing-prototypes]
 void w1_found(struct w1_bus *bus, u64 rn)
      ^~~~~~~~

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usbgadget: dfu: remove useless break in the switch statement ...

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>