Merge branch 'for-next/spd'

Merge branch 'for-next/rpi'

Merge branch 'for-next/misc'

ARM: rpi: Clarify debug uart names ...

Now that we support the miniuart as lowlevel debug UART clarify that
the other UARTs are PL011.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: Kconfig: improve help text for DEBUG_LL ...

This adopts the help text used in Linux for the same setting. It
clarifies that a build with DEBUG_LL enabled will only work on the
system you chose the debug UART for.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fixup! ARM: rpi: Add mini UART debug_ll support

fixup! ARM: rpi: move debug UART Kconfig settings

images: pbl: verify CONFIG_BAREBOX_MAX_IMAGE_SIZE is not exceeded ...

For platforms such as the at91, the boot ROM imposes an upper limit
on barebox file size.  Prior to 5a1a5ed253 ("ARM: images: use piggydata"),
BAREBOX_MAX_PBLX_SIZE seems to have been the way to go for limiting
the size of the final barebox binary when using the PBL.
With pblx removed, this variable is of no use, so have the existing
BAREBOX_MAX_IMAGE_SIZE replace its functionality.

Currently BAREBOX_MAX_IMAGE_SIZE is only checked against in the non-PBL
case, so add a check in the PBL case as well.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: rpi: Add mini UART debug_ll support ...

The raspberry pi 3 comes up with the mini UART as default, so allow to
use it for debug_ll output.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: rpi: move debug UART Kconfig settings ...

In contrast to other architectures, R.Pi debug UART config was placed
under the "System Type" menu, not under the "Debugging -> low-level
debugging port". This made this setting easy to miss when enabling low
level debug mesages.

While at it use the existing base address defines rather than defining
them again in Kconfig.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ddr_spd: Enable in PBL ...

SPD EEPROMs are typically needed in PBL when the SDRAM is not yet
initialized. Enable compilation of the SPD support in PBL.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ddr_spd: Add function to read eeprom ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ddr_spd: Update from U-Boot ...

This updates the ddr_spd.h header file from U-Boot-2019.01 with some
small changes:

- typedefs are removed
- "_s" suffix from struct types removed
- remove unnecessary "extern" from function declarations

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

crc: import crc_itu_t() from kernel ...

Our cyc_crc16() function is the same function as crc_itu_t() in the
Linux kernel. Import and use crc_itu_t() from the Kernel for
consistency.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: console_common: do not store color additions to the log buffer ...

it is needed for raw dmesg output

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: dmesg: add -l option to restrict output level ...

Same as linux dmesg, barebox dmesg will be able to restrict output level
by using -l option. For example "dmesg -l err,warn"
This functionality can be used for test automation.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: dmesg: add print raw parameter ...

Add -r option to mimic functionality of linux dmesg.
It will prefix log level and timestamp to each buffer:
<6>[       460us] barebox 2019.02.0-00266-g6aea757067-dirty #355 Thu Feb 21 11:51:43 CET 2019
<6>[      6279us] Board: DPTechnics DPT-Module
<6>[    209281us] mdio_bus: miibus0: probed
<6>[    210184us] ag71xx-gmac 18070000.mac@19000000.of: network device registered
<6>[    216051us] m25p80 w25q128@00: w25q128 (16384 Kbytes)
<6>[    219913us] netconsole: registered as netconsole-1
<6>[    223312us] malloc space: 0x80c00000 -> 0x80ffffff (size 4 MiB)
<6>[    228255us] eth0: got preset MAC address: c4:93:00:00:ae:89
<6>[    246363us] running /env/bin/init...

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

watchdog: add (U)EFI driver ...

This driver is using SetWatchdogTimer() UEFI interface and was
tested on iBASE MI991AF Mini-ITX motherboard.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: cleanups ...

make local functions static and remove unused code

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

Merge branch 'for-next/lseek'

memory: of_fixup: adapt to new memory layout ...

Since kernel 4.16 the memory nodes got a @<reg> suffix so the fixup
won't work correctly anymore, because instead of adapting the extisting
one the fixup creates a new node and keeps the old (maybe incorrect)
node.

To be compatible with the old and new layout delete the found memory
node and create a new one. The new node follows the new @<reg> style.

The patch also renames the node parameter to make it clearer.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: state: harmonize code with dt-utils ...

Insert a helpful size check that is an outcome of the following dt-utils
commits:

| commit a6eb535
| Author: Markus Pargmann <mpa@pengutronix.de>
| Date:   Fri May 27 13:53:40 2016 +0200
|
|     barebox-state: Import updated state code
|
|     Signed-off-by: Markus Pargmann <mpa@pengutronix.de>

| commit 583acea
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date:   Thu Mar 23 11:29:50 2017 +0100
|
|     state: backend-direct: Fix max_size
|
|     The max_size in the direct backend includes the meta data, so
|     substract its size when determing the max data size we can store.
|
|     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

| commit dcf781f
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date:   Thu Mar 23 12:59:48 2017 +0100
|
|     state: backend_bucket_direct: max_size is always given
|
|     max_size is always != 0, so if(direct->max_size) can be skipped.
|
|     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: state: harmonize code with dt-utils ...

Linux userspace with recent glibc versions lets barebox-state suffer from
linux/stat.h redefining 'struct statx' and because of that switched to the
inclusion of sys/stat.h instead, see dt-utils commit 1c80e31872ae ("src: fix
compilation for glibc version 2.27.9000-36.fc29 and newer").

We can follow this switch in barebox without any problems, too, as in barebox
sys/stat.h includes linux/stat.h (and adds some more definitions on top that
don't hurt us here).

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: state: harmonize code with dt-utils ...

Linux userspace needs sys/param.h to have the definition of roundup().

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: state: harmonize code with dt-utils ...

Other than in barebox the offset and size of a state's backend device do not
necessarily equal zero in Linux userspace (EEPROMs & block devices), so barebox'
and dt-utils' state code differ here.

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: state: fix formatting of "uint32_t" variables ...

To harmonize the common codebase this ports the following dt-utils commit:

| commit 5588a6c
| Author: Ulrich Ölmann <u.oelmann@pengutronix.de>
| Date:   Sun Feb 3 22:48:07 2019 +0100
|
|     state: fix formatting of "uint32_t" variables
|
|     The format specifier "%zd" is for "size_t" typed variables and produces a
|     warning with gcc, so use "%u" instead.
|
|     Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
|     Signed-off-by: Roland Hieber <rhi@pengutronix.de>

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: state: fix formatting of "off_t" variables ...

To harmonize the common codebase this ports the following dt-utils commit:

| commit 89d0332
| Author: Ulrich Ölmann <u.oelmann@pengutronix.de>
| Date:   Sun Feb 3 22:48:06 2019 +0100
|
|     state: fix formatting of "off_t" variables
|
|     Explicitely casting an "off_t" variable to "long long" and formatting it via
|     "%lld" or "%llx" respectively makes 32- as well as 64-bit compilers
|     happy (tested with gcc-8.2.1 and clang-7.0.1).
|
|     Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
|     Signed-off-by: Roland Hieber <rhi@pengutronix.de>

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: state: fix compiler warnings about wrong type conversion in messages ...

To harmonize the common codebase this ports the remaining hunks of the following
dt-utils commit, as the residual hunks have independently already been done
before in barebox commit 1afbf6b5680e ("state: fix compile warnings for dev_err
expansion"):

| commit 9f1db73
| Author: Philipp Rosenberger <p.rosenberger@linutronix.de>
| Date:   Thu Oct 18 09:17:23 2018 +0200
|
|     Fix compiler warnings about wrong type conversion in messages.
|
|     These warning were observed with gcc-6.3 on x86-64.
|
|     Signed-off-by: Philipp Rosenberger <p.rosenberger@linutronix.de>
|     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: state: fix typo ...

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>