lds: Add and use RO_DATA_SECTION macro ...

We have many different pointer arrays which we put into linker sections
and each time there's one added we have to adjust all linker scripts.
This adds a common RO_DATA_SECTION define and uses it for all
architectures. This makes it easier to add a new linker array.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

X86: lds: remove unnecessary alignments ...

We do not seem to need all these alignments in the rodata sections, so
remove them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

lds: Move start/end address variables into defines ...

For the older section defines we specify the start and end addresses
outside the macro which means we have to repeat them in each linker
script. Make the start/end addresses part of the define to simplify
things. While at it, add a BAREBOX_ prefix to the INITCALLS and EXITCALLS
macros for consistency to the other defines.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

Merge branch 'for-next/sandbox'

hwrng: add sandbox driver interface to host /dev/random ...

Linux as well as other operating systems can provide /dev/random and
/dev/urandom device to service userspace need for randomness.
Add a driver to use /dev/random for blocking and /dev/urandom for
non-blocking barebox random numbers.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: dts: add example for barebox, hostfile backed state ...

Previous commit now allows probing barebox,hostfile to be probed from
device tree. Add a barebox state node that shows how to use it. It's not
included by default, same as barebox-libftdi-example.dtsi in the same
directory.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: hostfile: allow probing from device tree ...

When testing things like barebox state in sandbox, it's nice to be able
to refer to a partition on a hostfile by phandle. Support this by
checking for reading the barebox,filename property.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: support Address and UndefinedBehavior sanitizers ...

For the hosted implementation, we just need to pass the appropriate
options at compile and link time. No further arch-specific
code needed.

Because we define our own handlers in lib/ubsan.c, linking against
libubsan isn't strictly required. We do it anyway on sandbox, so we can
use the backtrace functionality within.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: use sanitizer unwind for dump_stack if available ...

The sanitize unwind looks pretty and is just a function call away if we
are compiling with KASAN or UBSAN. Use it if available.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Kconfig: retire empty <asm/barebox.h> ...

With the latest changes, this file is empty on all archs. Drop it.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: compile with symbol -fvisibility=hidden ...

barebox defines many symbols that are reserved for the C implementation.
This collides with the libc, when building barebox for ARCH=sandbox.

Specify -fvsibility-hidden, so libraries barebox is linked against don't
inadvertently use barebox' functions.

This fixes a heap corruption occurring when issuing fb0.enable=1 on my
system, because X11 used strdup out of barebox, but free out of glibc[1]:

     binding file /lib/x86_64-linux-gnu/libX11.so.6 [0] to
     ./barebox [0]: normal symbol l `strdup' [GLIBC_2.2.5]
     [...]
     binding file /lib/x86_64-linux-gnu/libc.so.6 [0] to
     /lib/x86_64-linux-gnu/libc.so.6 [0]: normal symbol `free' [GLIBC_2.2.5]

[1]: cf. CFLAGS +=-Dfree=barebox_free in arch/sandbox/Makefile

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: redefine optarg and optind to avoid collisions ...

If we don't do this, the barebox main may fail to parse arguments.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: remove unused ARCH_LINUX Kconfig symbol ...

It's not referenced anywhere anymore, so drop it.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: include header to provide missing prototype ...

sandbox_add_device lacks a prototype. Include the appropriate header to
fix this.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/sandbox'

sandbox: drop blank lines at EOF ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: eliminale no previous prototype for ‘sandbox_add_device’ warning ...

The patch fixes the following gcc-8.3.0 warning:

arch/sandbox/board/devices.c:13:5: warning: no previous prototype for ‘sandbox_add_device’ [-Wmissing-prototypes]
 int sandbox_add_device(struct device_d *dev)
     ^~~~~~~~~~~~~~~~~~

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: prevent segfault in tap_alloc() ...

Tap network interface initialization in sandbox
barebox leads to segfault under Debian Buster/Sid.

The problem is that strcpy(dev, ifr.ifr_name) inside
tap_alloc() tries to alter read-only data passed
by tap_probe() and barebox receives SIGSEGV.

Nobody uses network interface name returned
by tap_alloc() so we can drop this strcpy().

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Regenerate defconfig files ...

Update defconfig files with the following script.

for a in arch/*; do
	arch=$(basename $a)
	for c in $a/configs/*; do
		config=$(basename $c)

	export ARCH=$arch
	make $config && make savedefconfig && mv defconfig $c
	done
done

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Shell: Handle aborting loops better ...

It's easy to get stuck in an infinite loop in the hush shell:

while true; do sleep 1; done

The 'sleep' command will check for ctrl-c with the ctrlc() function. This
will abort the sleep command. Hush then checks for ctrl-c again in the
loop. The ctrl-c in the buffer has already been eaten by the sleep
command, so the loop will continue.

With this patch we remember the presence of a ctrl-c character in a
variable instead of checking for a new character each time. The
variable must be resetted explicitly by calling ctrlc_handled() which
will be called by the shell in the outer loop.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

devfs: Drop dev_lseek_default() ...

Only the following cdevs do not declare an .lseek() operation:

  - Console devices in common/console.c
  - Firmware framework in common/firmware.c
  - JTAG driver in drivers/misc/jtag.c
  - UBI in drivers/mtd/ubi/barebox.c

Of those four, first two are marked DEVFS_IS_CHARACTER_DEV and
implement only .write() operation and the last two don't implement
anything but .ioctl(). While there's probably no meaningful way to use
lseek() against any of those devices, there doesn't seem to be any
harm in allowing it either.

Change devfs_lseek() to ignore absense of .lseek() callback and drop
dev_lseek_default() and all references to it in the codebase.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

move umode_t typedef from asm/types.h to linux/types.h ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

kconfig: include common Kconfig files from top-level Kconfig ...

Based on this linux kernel commit:

> commit 1572497
> Author: Christoph Hellwig <hch@lst.de>
> Date:   Tue Jul 31 13:39:30 2018 +0200
>
>     kconfig: include common Kconfig files from top-level Kconfig

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: Introduce dev_set_name() ...

Introduce dev_set_name() in order to hide implementation details of
setting device's name so it'd be easier to change it.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rename file_operations -> cdev_operations ...

Linux also has struct file_operations which are something different.
Rename our file_operations to cdev_operations which better matches
what we have.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: implement generic command support ...

The RATP implementation now allows executing generic commands with a
binary interface: binary requests are received and binary responses
are returned.

Each command can define its own RATP request contents (e.g. to specify
command-specific options) as well as its own RATP response contents
(if any data is to be returned).

Each command is associated with a pair of numeric unique request and
response IDs, and for easy reference these IDs are maintained in the
common ratp_bb header. Modules may override generic implemented
commands or include their own new ones (as long as the numeric IDs
introduced are unique).

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/sandbox-libftdi'

sandbox: add i2c and spi libftdi1 bit-bang example ...

Make necessary changes in sandbox_defconfig:
enable gpio, spi, i2c and led stuff.

Usage:

  barebox$ make sandbox_defconfig
  barebox$ sed -i "s/# CONFIG_GPIO_LIBFTDI1.*$/CONFIG_GPIO_LIBFTDI1=y/" .config

  # edit arch/sandbox/dts/sandbox-libftdi-example.dtsi

  barebox$ echo '#include "sandbox-libftdi-example.dtsi"' >> arch/sandbox/dts/sandbox.dts
  barebox$ make
  barebox$ sudo ./barebox -d arch/sandbox/dts/sandbox.dtb

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: add gpio support with libftdi1 ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>