GitBucket
Newer
/**
******************************************************************************
* @file stm32f3xx_hal_dac.h
* @author MCD Application Team
* @brief Header file of DAC HAL module.
******************************************************************************
* @attention
*
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32F3xx_HAL_DAC_H
#define STM32F3xx_HAL_DAC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f3xx_hal_def.h"
/** @addtogroup STM32F3xx_HAL_Driver
* @{
*/
/** @addtogroup DAC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup DAC_Exported_Types DAC Exported Types
* @{
*/
/**
* @brief HAL State structures definition
*/
typedef enum
{
HAL_DAC_STATE_RESET = 0x00U, /*!< DAC not yet initialized or disabled */
HAL_DAC_STATE_READY = 0x01U, /*!< DAC initialized and ready for use */
HAL_DAC_STATE_BUSY = 0x02U, /*!< DAC internal processing is ongoing */
HAL_DAC_STATE_TIMEOUT = 0x03U, /*!< DAC timeout state */
HAL_DAC_STATE_ERROR = 0x04U /*!< DAC error state */
}HAL_DAC_StateTypeDef;
/**
* @brief DAC Configuration regular Channel structure definition
*/
typedef struct
{
uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
This parameter can be a value of @ref DACEx_trigger_selection */
uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
This parameter can be a value of @ref DAC_output_buffer
For a given DAC channel, is this paramater applies then DAC_OutputSwitch
does not apply */
uint32_t DAC_OutputSwitch; /*!< Specifies whether the DAC channel output switch is enabled or disabled.
This parameter can be a value of @ref DAC_OutputSwitch
For a given DAC channel, is this paramater applies then DAC_OutputBuffer
does not apply */
}DAC_ChannelConfTypeDef;
/**
* @brief DAC handle Structure definition
*/
typedef struct __DAC_HandleTypeDef
{
DAC_TypeDef *Instance; /*!< Register base address */
__IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */
HAL_LockTypeDef Lock; /*!< DAC locking object */
DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1U */
DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2U */
__IO uint32_t ErrorCode; /*!< DAC Error code */
#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
void (* ConvCpltCallbackCh1) (struct __DAC_HandleTypeDef *hdac);
void (* ConvHalfCpltCallbackCh1) (struct __DAC_HandleTypeDef *hdac);
void (* ErrorCallbackCh1) (struct __DAC_HandleTypeDef *hdac);
void (* DMAUnderrunCallbackCh1) (struct __DAC_HandleTypeDef *hdac);
void (* ConvCpltCallbackCh2) (struct __DAC_HandleTypeDef* hdac);
void (* ConvHalfCpltCallbackCh2) (struct __DAC_HandleTypeDef* hdac);
void (* ErrorCallbackCh2) (struct __DAC_HandleTypeDef* hdac);
void (* DMAUnderrunCallbackCh2) (struct __DAC_HandleTypeDef* hdac);
void (* MspInitCallback) (struct __DAC_HandleTypeDef *hdac);
void (* MspDeInitCallback ) (struct __DAC_HandleTypeDef *hdac);
#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
}DAC_HandleTypeDef;
#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
/**
* @brief HAL DAC Callback ID enumeration definition
*/
typedef enum
{
HAL_DAC_CH1_COMPLETE_CB_ID = 0x00U, /*!< DAC CH1 Complete Callback ID */
HAL_DAC_CH1_HALF_COMPLETE_CB_ID = 0x01U, /*!< DAC CH1 half Complete Callback ID */
HAL_DAC_CH1_ERROR_ID = 0x02U, /*!< DAC CH1 error Callback ID */
HAL_DAC_CH1_UNDERRUN_CB_ID = 0x03U, /*!< DAC CH1 underrun Callback ID */
HAL_DAC_CH2_COMPLETE_CB_ID = 0x04U, /*!< DAC CH2 Complete Callback ID */
HAL_DAC_CH2_HALF_COMPLETE_CB_ID = 0x05U, /*!< DAC CH2 half Complete Callback ID */
HAL_DAC_CH2_ERROR_ID = 0x06U, /*!< DAC CH2 error Callback ID */
HAL_DAC_CH2_UNDERRUN_CB_ID = 0x07U, /*!< DAC CH2 underrun Callback ID */
HAL_DAC_MSP_INIT_CB_ID = 0x08U, /*!< DAC MspInit Callback ID */
HAL_DAC_MSP_DEINIT_CB_ID = 0x09U, /*!< DAC MspDeInit Callback ID */
HAL_DAC_ALL_CB_ID = 0x0AU /*!< DAC All ID */
}HAL_DAC_CallbackIDTypeDef;
/**
* @brief HAL DAC Callback pointer definition
*/
typedef void (*pDAC_CallbackTypeDef)(DAC_HandleTypeDef *hdac);
#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup DAC_Exported_Constants DAC Exported Constants
* @{
*/
/** @defgroup DAC_Error_Code DAC Error Code
* @{
*/
#define HAL_DAC_ERROR_NONE 0x00U /*!< No error */
#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01U /*!< DAC channel1 DMA underrun error */
#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02U /*!< DAC channel2 DMA underrun error */
#define HAL_DAC_ERROR_DMA 0x04U /*!< DMA error */
#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
#define HAL_DAC_ERROR_INVALID_CALLBACK 0x10U /*!< Invalid callback error */
#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
/**
* @}
*/
/** @defgroup DAC_lfsrunmask_triangleamplitude DAC lfsrunmask triangleamplitude
* @{
*/
#define DAC_LFSRUNMASK_BIT0 (0x00000000U) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
#define DAC_LFSRUNMASK_BITS1_0 ((uint32_t)DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS2_0 ((uint32_t)DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS3_0 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0)/*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS4_0 ((uint32_t)DAC_CR_MAMP1_2) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS5_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS6_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS7_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS8_0 ((uint32_t)DAC_CR_MAMP1_3) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS9_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS10_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS11_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
#define DAC_TRIANGLEAMPLITUDE_1 (0x00000000U) /*!< Select max triangle amplitude of 1U */
#define DAC_TRIANGLEAMPLITUDE_3 ((uint32_t)DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3U */
#define DAC_TRIANGLEAMPLITUDE_7 ((uint32_t)DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 7U */
#define DAC_TRIANGLEAMPLITUDE_15 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15U */
#define DAC_TRIANGLEAMPLITUDE_31 ((uint32_t)DAC_CR_MAMP1_2) /*!< Select max triangle amplitude of 31U */
#define DAC_TRIANGLEAMPLITUDE_63 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63U */
#define DAC_TRIANGLEAMPLITUDE_127 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 127U */
#define DAC_TRIANGLEAMPLITUDE_255 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255U */
#define DAC_TRIANGLEAMPLITUDE_511 ((uint32_t)DAC_CR_MAMP1_3) /*!< Select max triangle amplitude of 511U */
#define DAC_TRIANGLEAMPLITUDE_1023 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023U */
#define DAC_TRIANGLEAMPLITUDE_2047 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 2047U */
#define DAC_TRIANGLEAMPLITUDE_4095 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095U */
/**
* @}
*/
/** @defgroup DAC_output_buffer DAC output buffer
* @{
*/
#define DAC_OUTPUTBUFFER_ENABLE (0x00000000U)
#define DAC_OUTPUTBUFFER_DISABLE ((uint32_t)DAC_CR_BOFF1)
/**
* @}
*/
#if defined(DAC_CR_OUTEN1)
/** @defgroup DAC_output_switch DAC output switch
* @{
*/
#define DAC_OUTPUTSWITCH_DISABLE (0x00000000U)
#define DAC_OUTPUTSWITCH_ENABLE ((uint32_t)DAC_CR_OUTEN1)
/**
* @}
*/
#endif /* DAC_CR_OUTEN1 */
/** @defgroup DAC_data_alignement DAC data alignement
* @{
*/
#define DAC_ALIGN_12B_R (0x00000000U)
#define DAC_ALIGN_12B_L (0x00000004U)
#define DAC_ALIGN_8B_R (0x00000008U)
/**
* @}
*/
/** @defgroup DAC_flags_definition DAC flags definition
* @{
*/
#define DAC_FLAG_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
#define DAC_FLAG_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
/**
* @}
*/
/** @defgroup DAC_interrupts_definition DAC interrupts definition
* @{
*/
#define DAC_IT_DMAUDR1 ((uint32_t)DAC_CR_DMAUDRIE1)
#define DAC_IT_DMAUDR2 ((uint32_t)DAC_CR_DMAUDRIE2)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup DAC_Exported_Macros DAC Exported Macros
* @{
*/
/** @brief Reset DAC handle state
* @param __HANDLE__ specifies the DAC handle.
* @retval None
*/
#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) do { \
(__HANDLE__)->State = HAL_DAC_STATE_RESET; \
(__HANDLE__)->MspInitCallback = NULL; \
(__HANDLE__)->MspDeInitCallback = NULL; \
} while(0)
#else
#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET)
#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
/** @brief Enable the DAC channel
* @param __HANDLE__ specifies the DAC handle.
* @param __DAC_Channel__ specifies the DAC channel
* @retval None
*/
#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) \
((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << (__DAC_Channel__)))
/** @brief Disable the DAC channel
* @param __HANDLE__ specifies the DAC handle
* @param __DAC_Channel__ specifies the DAC channel.
* @retval None
*/
#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) \
((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << (__DAC_Channel__)))
/** @brief Set DHR12R1 alignment
* @param __ALIGNMENT__ specifies the DAC alignment
* @retval None
*/
#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) ((0x00000008U) + (__ALIGNMENT__))
/** @brief Set DHR12R2 alignment
* @param __ALIGNMENT__ specifies the DAC alignment
* @retval None
*/
#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) ((0x00000014U) + (__ALIGNMENT__))
/** @brief Set DHR12RD alignment
* @param __ALIGNMENT__ specifies the DAC alignment
* @retval None
*/
#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) ((0x00000020U) + (__ALIGNMENT__))
/** @brief Enable the DAC interrupt
* @param __HANDLE__ specifies the DAC handle
* @param __INTERRUPT__ specifies the DAC interrupt.
* This parameter can be any combination of the following values:
* @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt
* @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt
* @retval None
*/
#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
/** @brief Disable the DAC interrupt
* @param __HANDLE__ specifies the DAC handle
* @param __INTERRUPT__ specifies the DAC interrupt.
* This parameter can be any combination of the following values:
* @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt
* @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt
* @retval None
*/
#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
/** @brief Check whether the specified DAC interrupt source is enabled or not
* @param __HANDLE__ DAC handle
* @param __INTERRUPT__ DAC interrupt source to check
* This parameter can be any combination of the following values:
* @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt
* @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt
* @retval State of interruption (SET or RESET)
*/
#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__))
/** @brief Get the selected DAC's flag status
* @param __HANDLE__ specifies the DAC handle.
* @param __FLAG__ specifies the DAC flag to get.
* This parameter can be any combination of the following values:
* @arg DAC_FLAG_DMAUDR1: DAC channel 1 DMA underrun flag
* @arg DAC_FLAG_DMAUDR2: DAC channel 2 DMA underrun flag
* @retval None
*/
#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
/** @brief Clear the DAC's flag
* @param __HANDLE__ specifies the DAC handle.
* @param __FLAG__ specifies the DAC flag to clear.
* This parameter can be any combination of the following values:
* @arg DAC_FLAG_DMAUDR1: DAC channel 1 DMA underrun flag
* @arg DAC_FLAG_DMAUDR2: DAC channel 2 DMA underrun flag
* @retval None
*/
#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__))
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/** @addtogroup DAC_Private_Macros
* @{
*/
#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \
((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_4095))
#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \
((STATE) == DAC_OUTPUTBUFFER_DISABLE))
#if defined(DAC_CR_OUTEN1)
#define IS_DAC_OUTPUT_SWITCH_STATE(STATE) (((STATE) == DAC_OUTPUTSWITCH_DISABLE) || \
((STATE) == DAC_OUTPUTSWITCH_ENABLE))
#endif /* DAC_CR_OUTEN1 */
#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \
((ALIGN) == DAC_ALIGN_12B_L) || \
((ALIGN) == DAC_ALIGN_8B_R))
#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0U)
/**
* @}
*/
/* Include DAC HAL Extended module */
#include "stm32f3xx_hal_dac_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup DAC_Exported_Functions
* @{
*/
/** @addtogroup DAC_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions *****************************/
HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac);
HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac);
void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac);
void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac);
/**
* @}
*/
/** @addtogroup DAC_Exported_Functions_Group2
* @{
*/
/* IO operation functions *****************************************************/
HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel);
HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel);
HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment);
HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel);
uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel);
HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel);
void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac);
void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac);
void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac);
void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac);
void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac);
#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
/* DAC callback registering/unregistering */
HAL_StatusTypeDef HAL_DAC_RegisterCallback (DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackId, pDAC_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_DAC_UnRegisterCallback (DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackId);
#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
/**
* @}
*/
/** @addtogroup DAC_Exported_Functions_Group3
* @{
*/
/* Peripheral Control functions ***********************************************/
HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data);
/**
* @}
*/
/** @addtogroup DAC_Exported_Functions_Group4
* @{
*/
/* Peripheral State and Error functions ***************************************/
HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac);
uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32F3xx_HAL_DAC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/