/* 
 * Copyright (c) 2015 Nordic Semiconductor ASA
 * All rights reserved.
 * 
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 * 
 *   1. Redistributions of source code must retain the above copyright notice, this list 
 *      of conditions and the following disclaimer.
 *
 *   2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA 
 *      integrated circuit in a product or a software update for such product, must reproduce 
 *      the above copyright notice, this list of conditions and the following disclaimer in 
 *      the documentation and/or other materials provided with the distribution.
 *
 *   3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be 
 *      used to endorse or promote products derived from this software without specific prior 
 *      written permission.
 *
 *   4. This software, with or without modification, must only be used with a 
 *      Nordic Semiconductor ASA integrated circuit.
 *
 *   5. Any software provided in binary or object form under this license must not be reverse 
 *      engineered, decompiled, modified and/or disassembled. 
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * 
 */


/**
 *
 * @defgroup nrf_twi Two-wire interface (TWI)
 * @ingroup nrf_drivers
 * @brief Two-wire interface (TWI) APIs.
 *
 * @defgroup nrf_twi_master TWI master HAL and driver
 * @ingroup nrf_twi
 * @brief TWI master APIs.
 * @details The TWI and TWIM HALs provide basic APIs for accessing the registers of the TWI and TWIM peripherals, respectively. 
 *
 * The TWI master driver provides APIs on a higher level.
 *
 */

#ifndef NRF_DRV_TWI_H__
#define NRF_DRV_TWI_H__

#include "nordic_common.h"
#include "nrf_drv_config.h"

// This set of macros makes it possible to exclude parts of code when one type
// of supported peripherals is not used.
#if ((TWI0_ENABLED == 1 && TWI0_USE_EASY_DMA == 1) || \
     (TWI1_ENABLED == 1 && TWI1_USE_EASY_DMA == 1))
    #define TWIM_IN_USE
#endif
#if ((TWI0_ENABLED == 1 && TWI0_USE_EASY_DMA != 1) || \
     (TWI1_ENABLED == 1 && TWI1_USE_EASY_DMA != 1))
    #define TWI_IN_USE
#endif

#include "nrf_twi.h"
#ifdef TWIM_IN_USE
    #include "nrf_twim.h"
#endif
#include "sdk_errors.h"

#if defined(NRF52)
    #define NRF_DRV_TWI_PERIPHERAL(id)           \
        (CONCAT_3(TWI, id, _USE_EASY_DMA) == 1 ? \
            (void *)CONCAT_2(NRF_TWIM, id)       \
          : (void *)CONCAT_2(NRF_TWI, id))
#else
    #define NRF_DRV_TWI_PERIPHERAL(id)  (void *)CONCAT_2(NRF_TWI, id)
#endif

/**
 * @defgroup nrf_drv_twi TWI master driver
 * @{
 * @ingroup nrf_twi_master
 * @brief   Multi-instance TWI master driver.
 */

/**
 * @brief Structure for the TWI master driver instance.
 */
typedef struct
{
    union
    {
#ifdef TWIM_IN_USE
        NRF_TWIM_Type * p_twim; ///< Pointer to a structure with TWIM registers.
#endif
        NRF_TWI_Type  * p_twi;  ///< Pointer to a structure with TWI registers.
    } reg;
    uint8_t drv_inst_idx; ///< Driver instance index.
    bool    use_easy_dma; ///< True if the peripheral with EasyDMA (TWIM) shall be used.
} nrf_drv_twi_t;

/**
 * @brief Macro for creating a TWI master driver instance.
 */
#define NRF_DRV_TWI_INSTANCE(id)                        \
{                                                       \
    .reg          = {NRF_DRV_TWI_PERIPHERAL(id)},       \
    .drv_inst_idx = CONCAT_3(TWI, id, _INSTANCE_INDEX), \
    .use_easy_dma = CONCAT_3(TWI, id, _USE_EASY_DMA)    \
}

/**
 * @brief Structure for the TWI master driver instance configuration.
 */
typedef struct
{
    uint32_t            scl;                ///< SCL pin number.
    uint32_t            sda;                ///< SDA pin number.
    nrf_twi_frequency_t frequency;          ///< TWI frequency.
    uint8_t             interrupt_priority; ///< Interrupt priority.
} nrf_drv_twi_config_t;

/**
 * @brief TWI master driver instance default configuration.
 */
#define NRF_DRV_TWI_DEFAULT_CONFIG(id)                            \
{                                                                 \
    .frequency          = CONCAT_3(TWI, id, _CONFIG_FREQUENCY),   \
    .scl                = CONCAT_3(TWI, id, _CONFIG_SCL),         \
    .sda                = CONCAT_3(TWI, id, _CONFIG_SDA),         \
    .interrupt_priority = CONCAT_3(TWI, id, _CONFIG_IRQ_PRIORITY) \
}

#define NRF_DRV_TWI_FLAG_TX_POSTINC          (1UL << 0) /**< TX buffer address incremented after transfer. */
#define NRF_DRV_TWI_FLAG_RX_POSTINC          (1UL << 1) /**< RX buffer address incremented after transfer. */
#define NRF_DRV_TWI_FLAG_NO_XFER_EVT_HANDLER (1UL << 2) /**< Interrupt after each transfer is suppressed, and the event handler is not called. */
#define NRF_DRV_TWI_FLAG_HOLD_XFER           (1UL << 3) /**< Set up the transfer but do not start it. */
#define NRF_DRV_TWI_FLAG_REPEATED_XFER       (1UL << 4) /**< Flag indicating that the transfer will be executed multiple times. */
#define NRF_DRV_TWI_FLAG_TX_NO_STOP          (1UL << 5) /**< Flag indicating that the TX transfer will not end with a stop condition. */

/**
 * @brief TWI master driver event types.
 */
typedef enum
{
    NRF_DRV_TWI_EVT_DONE,         ///< Transfer completed event.
    NRF_DRV_TWI_EVT_ADDRESS_NACK, ///< Error event: NACK received after sending the address.
    NRF_DRV_TWI_EVT_DATA_NACK     ///< Error event: NACK received after sending a data byte.
} nrf_drv_twi_evt_type_t;

/**
 * @brief TWI master driver transfer types.
 */
typedef enum
{
    NRF_DRV_TWI_XFER_TX,          ///< TX transfer.
    NRF_DRV_TWI_XFER_RX,          ///< RX transfer.
    NRF_DRV_TWI_XFER_TXRX,        ///< TX transfer followed by RX transfer with repeated start.
    NRF_DRV_TWI_XFER_TXTX         ///< TX transfer followed by TX transfer with repeated start.
} nrf_drv_twi_xfer_type_t;

/**
 * @brief Structure for a TWI transfer descriptor.
 */
typedef struct
{
    nrf_drv_twi_xfer_type_t type;             ///< Type of transfer.
    uint8_t                 address;          ///< Slave address.
    uint8_t                 primary_length;   ///< Number of bytes transferred.
    uint8_t                 secondary_length; ///< Number of bytes transferred.
    uint8_t *               p_primary_buf;    ///< Pointer to transferred data.
    uint8_t *               p_secondary_buf;  ///< Pointer to transferred data.
} nrf_drv_twi_xfer_desc_t;


/**@brief Macro for setting the TX transfer descriptor. */
#define NRF_DRV_TWI_XFER_DESC_TX(addr, p_data, length)                 \
    {                                                                  \
        .type = NRF_DRV_TWI_XFER_TX,                                   \
        .address = addr,                                               \
        .primary_length = length,                                      \
        .p_primary_buf  = p_data,                                      \
    }

/**@brief Macro for setting the RX transfer descriptor. */
#define NRF_DRV_TWI_XFER_DESC_RX(addr, p_data, length)                 \
    {                                                                  \
        .type = NRF_DRV_TWI_XFER_RX,                                   \
        .address = addr,                                               \
        .primary_length = length,                                      \
        .p_primary_buf  = p_data,                                      \
    }

/**@brief Macro for setting the TXRX transfer descriptor. */
#define NRF_DRV_TWI_XFER_DESC_TXRX(addr, p_tx, tx_len, p_rx, rx_len)   \
    {                                                                  \
        .type = NRF_DRV_TWI_XFER_TXRX,                                 \
        .address = addr,                                               \
        .primary_length   = tx_len,                                    \
        .secondary_length = rx_len,                                    \
        .p_primary_buf    = p_tx,                                      \
        .p_secondary_buf  = p_rx,                                      \
    }

/**@brief Macro for setting the TXTX transfer descriptor. */
#define NRF_DRV_TWI_XFER_DESC_TXTX(addr, p_tx, tx_len, p_tx2, tx_len2) \
    {                                                                  \
        .type = NRF_DRV_TWI_XFER_TXTX,                                 \
        .address = addr,                                               \
        .primary_length   = tx_len,                                    \
        .secondary_length = tx_len2,                                   \
        .p_primary_buf    = p_tx,                                      \
        .p_secondary_buf  = p_tx2,                                     \
    }

/**
 * @brief Structure for a TWI event.
 */
typedef struct
{
    nrf_drv_twi_evt_type_t  type;      ///< Event type.
    nrf_drv_twi_xfer_desc_t xfer_desc; ///< Transfer details.
} nrf_drv_twi_evt_t;

/**
 * @brief TWI event handler prototype.
 */
typedef void (* nrf_drv_twi_evt_handler_t)(nrf_drv_twi_evt_t const * p_event,
                                           void *                    p_context);

/**
 * @brief Function for initializing the TWI instance.
 *
 * @param[in] p_instance      TWI instance.
 * @param[in] p_config        Initial configuration. If NULL, the default configuration is used.
 * @param[in] event_handler   Event handler provided by the user. If NULL, blocking mode is enabled.
 * @param[in] p_context       Context passed to event handler.
 *
 * @retval NRF_SUCCESS             If initialization was successful.
 * @retval NRF_ERROR_INVALID_STATE If the driver is in invalid state.
 * @retval NRF_ERROR_BUSY          If some other peripheral with the same
 *                                 instance ID is already in use. This is 
 *                                 possible only if PERIPHERAL_RESOURCE_SHARING_ENABLED 
 *                                 is set to a value other than zero.
 */
ret_code_t nrf_drv_twi_init(nrf_drv_twi_t const *        p_instance,
                            nrf_drv_twi_config_t const * p_config,
                            nrf_drv_twi_evt_handler_t    event_handler,
                            void *                       p_context);

/**
 * @brief Function for uninitializing the TWI instance.
 *
 * @param[in] p_instance  TWI instance.
 */
void nrf_drv_twi_uninit(nrf_drv_twi_t const * p_instance);

/**
 * @brief Function for enabling the TWI instance.
 *
 * @param[in] p_instance  TWI instance.
 */
void nrf_drv_twi_enable(nrf_drv_twi_t const * p_instance);

/**
 * @brief Function for disabling the TWI instance.
 *
 * @param[in] p_instance  TWI instance.
 */
void nrf_drv_twi_disable(nrf_drv_twi_t const * p_instance);

/**
 * @brief Function for sending data to a TWI slave.
 *
 * The transmission will be stopped when an error occurs. If a transfer is ongoing,
 * the function returns the error code @ref NRF_ERROR_BUSY.
 *
 * @param[in] p_instance TWI instance.
 * @param[in] address    Address of a specific slave device (only 7 LSB).
 * @param[in] p_data     Pointer to a transmit buffer.
 * @param[in] length     Number of bytes to send.
 * @param[in] no_stop    If set, the stop condition is not generated on the bus
 *                       after the transfer has completed successfully (allowing
 *                       for a repeated start in the next transfer).
 *
 * @retval NRF_SUCCESS        If the procedure was successful.
 * @retval NRF_ERROR_BUSY     If the driver is not ready for a new transfer.
 * @retval NRF_ERROR_INTERNAL If an error was detected by hardware.
 */
ret_code_t nrf_drv_twi_tx(nrf_drv_twi_t const * p_instance,
                          uint8_t               address,
                          uint8_t const *       p_data,
                          uint8_t               length,
                          bool                  no_stop);

/**
 * @brief Function for reading data from a TWI slave.
 *
 * The transmission will be stopped when an error occurs. If a transfer is ongoing,
 * the function returns the error code @ref NRF_ERROR_BUSY. 
 *
 * @param[in] p_instance TWI instance.
 * @param[in] address    Address of a specific slave device (only 7 LSB).
 * @param[in] p_data     Pointer to a receive buffer.
 * @param[in] length     Number of bytes to be received.
 *
 * @retval NRF_SUCCESS             If the procedure was successful.
 * @retval NRF_ERROR_BUSY          If the driver is not ready for a new transfer.
 * @retval NRF_ERROR_INTERNAL      If an error was detected by hardware.
 */
ret_code_t nrf_drv_twi_rx(nrf_drv_twi_t const * p_instance,
                          uint8_t               address,
                          uint8_t *             p_data,
                          uint8_t               length);

/**
 * @brief Function for preparing a TWI transfer.
 *
 * The following transfer types can be configured (@ref nrf_drv_twi_xfer_desc_t::type):
 * - @ref NRF_DRV_TWI_XFER_TXRX<span></span>: Write operation followed by a read operation (without STOP condition in between).
 * - @ref NRF_DRV_TWI_XFER_TXTX<span></span>: Write operation followed by a write operation (without STOP condition in between).
 * - @ref NRF_DRV_TWI_XFER_TX<span></span>:   Write operation (with or without STOP condition).
 * - @ref NRF_DRV_TWI_XFER_RX<span></span>:   Read operation  (with STOP condition).
 *
 * Additional options are provided using the flags parameter:
 * - @ref NRF_DRV_TWI_FLAG_TX_POSTINC and @ref NRF_DRV_TWI_FLAG_RX_POSTINC<span></span>: Post-incrementation of buffer addresses. Supported only by TWIM.
 * - @ref NRF_DRV_TWI_FLAG_NO_XFER_EVT_HANDLER<span></span>: No user event handler after transfer completion. In most cases, this also means no interrupt at the end of the transfer.
 * - @ref NRF_DRV_TWI_FLAG_HOLD_XFER<span></span>: Driver is not starting the transfer. Use this flag if the transfer is triggered externally by PPI. Supported only by TWIM.
 *   Use @ref nrf_drv_twi_start_task_get to get the address of the start task.
 * - @ref NRF_DRV_TWI_FLAG_REPEATED_XFER<span></span>: Prepare for repeated transfers. You can set up a number of transfers that will be triggered externally (for example by PPI).
 *   An example is a TXRX transfer with the options @ref NRF_DRV_TWI_FLAG_RX_POSTINC, @ref NRF_DRV_TWI_FLAG_NO_XFER_EVT_HANDLER, and @ref NRF_DRV_TWI_FLAG_REPEATED_XFER.
 *   After the transfer is set up, a set of transfers can be triggered by PPI that will read, for example, the same register of an
 *   external component and put it into a RAM buffer without any interrupts. @ref nrf_drv_twi_stopped_event_get can be used to get the
 *   address of the STOPPED event, which can be used to count the number of transfers. If @ref NRF_DRV_TWI_FLAG_REPEATED_XFER is used,
 *   the driver does not set the instance into busy state, so you must ensure that the next transfers are set up
 *   when TWIM is not active. Supported only by TWIM.
 * - @ref NRF_DRV_TWI_FLAG_TX_NO_STOP<span></span>: No stop condition after TX transfer.
 *
 * @note
 * Some flag combinations are invalid:
 * - @ref NRF_DRV_TWI_FLAG_TX_NO_STOP with @ref nrf_drv_twi_xfer_desc_t::type different than @ref NRF_DRV_TWI_XFER_TX
 * - @ref NRF_DRV_TWI_FLAG_REPEATED_XFER with @ref nrf_drv_twi_xfer_desc_t::type set to @ref NRF_DRV_TWI_XFER_TXTX
 *
 * If @ref nrf_drv_twi_xfer_desc_t::type is set to @ref NRF_DRV_TWI_XFER_TX and the @ref NRF_DRV_TWI_FLAG_TX_NO_STOP and @ref NRF_DRV_TWI_FLAG_REPEATED_XFER
 * flags are set, two tasks must be used to trigger a transfer: TASKS_RESUME followed by TASKS_STARTTX. If no stop condition is generated,
 * TWIM is in SUSPENDED state. Therefore, it must be resumed before the transfer can be started.
 *
 * @note
 * This function should be used only if the instance is configured to work in non-blocking mode. If the function is used in blocking mode, the driver asserts.
 * @note If you are using this function with TWI, the only supported flag is @ref NRF_DRV_TWI_FLAG_TX_NO_STOP. All other flags require TWIM.
  *
 * @param[in] p_instance        TWI instance.
 * @param[in] p_xfer_desc       Pointer to the transfer descriptor.
 * @param[in] flags             Transfer options (0 for default settings).
 *
 * @retval NRF_SUCCESS             If the procedure was successful.
 * @retval NRF_ERROR_BUSY          If the driver is not ready for a new transfer.
 * @retval NRF_ERROR_NOT_SUPPORTED If the provided parameters are not supported.
 */
ret_code_t nrf_drv_twi_xfer(nrf_drv_twi_t           const * p_instance,
                            nrf_drv_twi_xfer_desc_t const * p_xfer_desc,
                            uint32_t                        flags);

/**
 * @brief Function for checking the TWI driver state.
 *
 * @param[in] p_instance TWI instance.
 *
 * @retval true  If the TWI driver is currently busy performing a transfer.
 * @retval false If the TWI driver is ready for a new transfer.
 */
bool nrf_drv_twi_is_busy(nrf_drv_twi_t const * p_instance);

/**
 * @brief Function for getting the transferred data count.
 *
 * This function provides valid results only in legacy mode.
 *
 * @param[in] p_instance TWI instance.
 *
 * @return     Data count.
 */
uint32_t nrf_drv_twi_data_count_get(nrf_drv_twi_t const * const p_instance);

/**
 * @brief Function for returning the address of a TWI/TWIM start task.
 *
 * This function should be used if @ref nrf_drv_twi_xfer was called with the flag @ref NRF_DRV_TWI_FLAG_HOLD_XFER.
 * In that case, the transfer is not started by the driver, but it must be started externally by PPI.
 *
 * @param[in]  p_instance TWI instance.
 * @param[in]  xfer_type  Transfer type used in the last call of the @ref nrf_drv_twi_xfer function.
 *
 * @return     Start task address (TX or RX) depending on the value of xfer_type.
 */
uint32_t nrf_drv_twi_start_task_get(nrf_drv_twi_t const * p_instance, nrf_drv_twi_xfer_type_t xfer_type);

/**
 * @brief Function for returning the address of a STOPPED TWI/TWIM event.
 *
 * A STOPPED event can be used to detect the end of a transfer if the @ref NRF_DRV_TWI_FLAG_NO_XFER_EVT_HANDLER
 * option is used.
 *
 * @param[in]  p_instance  TWI instance.
 *
 * @return     STOPPED event address.
 */
uint32_t nrf_drv_twi_stopped_event_get(nrf_drv_twi_t const * p_instance);
/**
 *@}
 **/

#endif // NRF_DRV_TWI_H__