/**
******************************************************************************
* @file rtc_map.h
* @brief Real Time Clock HW register map
* @internal
* @author ON Semiconductor.
* $Rev: 3008 $
* $Date: 2014-10-16 18:42:48 +0530 (Thu, 16 Oct 2014) $
******************************************************************************
* Copyright 2016 Semiconductor Components Industries LLC (d/b/a “ON Semiconductor”).
* All rights reserved. This software and/or documentation is licensed by ON Semiconductor
* under limited terms and conditions. The terms and conditions pertaining to the software
* and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf
* (“ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software”) and
* if applicable the software license agreement. Do not use this software and/or
* documentation unless you have carefully read and you agree to the limited terms and
* conditions. By using this software and/or documentation, you agree to the limited
* terms and conditions.
*
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
* ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL,
* INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
* @endinternal
*
* @ingroup rtc
*
* @details
* <p>
* Teal Time Clock HW register map description
* </p>
*
* <h1> Reference document(s) </h1>
* <p>
* <a HOURef="../pdf/IPC7206_RTC_APB_DS_v1P0.pdf" target="_blank">
* IPC7206 APB RTC Design Specification v1.0 </a>
* </p>
*/
#ifndef RTC_MAP_H_
#define RTC_MAP_H_
#include "architecture.h"
/** Real Time Clock Control HW Structure Overlay */
typedef struct {
#ifdef REVB
/*REVD REPLACE COMPLETE MAP WITH DATA FROM DIG DESIGN SPEC */
__IO uint32_t SECOND;/**<SECOND Counter */
__IO uint32_t MINUTE;/**<DAY Counter */
__IO uint32_t HOUR;/**< HOUR Counter */
__IO uint32_t DAY;/**< DAY Counter */
__IO uint32_t MONTH;/**< MONTH Counter */
__IO uint32_t YEAR;/**< YEAR Counter */
union {
struct {
__IO uint32_t PAD1 :1;/**<Reserved; Writes have no effect. Read as 0 */
__IO uint32_t TEST_MINUTE :1;/**<0 = normal operation , 1 = Test Mode */
__IO uint32_t TEST_HOUR :1;/**<0 = normal operation , 1 = Test Mode */
__IO uint32_t TEST_DAY :1;/**<0 = normal operation , 1 = Test Mode */
__IO uint32_t TEST_MONTH :1;/**<0 = normal operation , 1 = Test Mode */
__IO uint32_t TEST_YEAR :1;/**<0 = normal operation , 1 = Test Mode */
__IO uint32_t PAD2 :1;/**<Reserved; Writes have no effect. Read as 0 */
__IO uint32_t RESET :1;/**< 0 = counters are incrementing , 1 = counters are in reset */
} BITS;
__IO uint32_t WORD;
} CONTROL;
__IO uint32_t DIVISOR;/**<Clock Divisor value */
__IO uint32_t ALARM_SECOND;/**<SECOND Alarm's BCD value */
__IO uint32_t ALARM_MINUTE;/**<MINUTE Alarm's BCD value */
__IO uint32_t ALARM_HOUR;/**<HOUR Alarm's BCD value*/
__IO uint32_t ALARM_DAY;/**<DAY Alarm's BCD value */
__IO uint32_t ALARM_MONTH;/**<MONTH Alarm's BCD value */
__IO uint32_t ALARM_YEAR;/**<YEAR Alarm's BCD value */
union {
struct {
__IO uint32_t SECOND :1;/**<SECOND Alarm interrupt : 0 = disabled, 1 = enabled */
__IO uint32_t MINUTE :1;/**<MINUTE Alarm interrupt : 0 = disabled, 1 = enabled */
__IO uint32_t HOUR :1;/**<HOUR Alarm interrupt : 0 = disabled, 1 = enabled */
__IO uint32_t DAY :1;/**<DAY Alarm interrupt : 0 = disabled, 1 = enabled */
__IO uint32_t MONTH :1;/**<MONTH Alarm interrupt : 0 = disabled, 1 = enabled */
__IO uint32_t YEAR :1;/**<YEAR Alarm interrupt : 0 = disabled, 1 = enabled */
__IO uint32_t PAD :2 ;/**<Writes have no effect; Read as 2’b00 */
} BITS;
__IO uint32_t WORD;
} INT_EN_CONTROL;
union {
struct {
__I uint32_t SECOND :1;/**<SECOND Alarm interrupt : 0= inactive , 1 = active */
__I uint32_t MINUTE :1;/**<MINUTE Alarm interrupt : 0= inactive , 1 = active */
__I uint32_t HOUR :1;/**<HOUR Alarm interrupt : 0= inactive , 1 = active */
__I uint32_t DAY :1;/**<DAY Alarm interrupt : 0= inactive , 1 = active */
__I uint32_t MONTH :1;/**<MONTH Alarm interrupt : 0= inactive , 1 = active */
__I uint32_t YEAR :1;/**<YEAR Alarm interrupt : 0= inactive , 1 = active */
__I uint32_t PAD :2; /**<Read as 00 */
} BITS;
__I uint32_t WORD;
} INT_STATUS;
union {
struct {
__O uint32_t SECOND :1;/**<Write 1 to clear the SECOND Alarm interrupt.*/
__O uint32_t MINUTE :1;/**<Write 1 to clear the MINUTE Alarm interrupt*/
__O uint32_t HOUR :1;/**<Write 1 to clear the HOUR Alarm interrupt*/
__O uint32_t DAY :1;/**< Write 1 to clear the DAY Alarm interrupt*/
__O uint32_t MONTH :1;/**<Write 1 to clear the MONTH Alarm interrupt */
__O uint32_t YEAR :1;/**< Write 1 to clear the YEAR Alarm interrupt*/
__O uint32_t PAD :2 ;/**< Writes have no effect. */
} BITS;
__O uint32_t WORD;
} INT_CLEAR;
#endif /* REVB */
#ifdef REVD
__IO uint32_t SUB_SECOND_COUNTER; /**<SUB SECOND Counter */ /* 0x4000F000 */
__IO uint32_t SECOND_COUNTER; /**<SECOND Counter */ /* 0x4000F004 */
__IO uint32_t SUB_SECOND_ALARM; /**< SUB SECOND alarm */ /* 0x4000F008 */
__IO uint32_t SECOND_ALARM; /**< SECOND alarm */ /* 0x4000F00c */
union {
struct {
__IO uint32_t SUB_SEC_COUNTER_EN :1; /**<Sub-second counter enable. (1=count is enabled, 0=retain count value) */
__IO uint32_t SEC_COUNTER_EN :1; /**<Second counter enable. (1=count is enabled, 0=retain count value) */
__IO uint32_t SUB_SECOND_INT_EN :1; /**<Sub-second interrupt enable (1=interrupt enabled, 0=interrupt disabled) */
__IO uint32_t SECOND_INT_EN :1; /**<Second interrupt enable (1=interrupt enabled, 0=interrupt disabled) */
} BITS;
__IO uint32_t WORD;
} CONTROL; /* 0x4000F010 */
union {
struct {
/**<Any write to the status register will clear the error bit. */
__IO uint32_t SUB_SECOND_INT:1; /**<Sub-second interrupt status. (1=interrupt active, 0=no interrupt)*/
__IO uint32_t SECOND_INT :1; /**<Second interrupt status. (1=interrupt active, 0=no interrupt)*/
__IO uint32_t WRITE_ERROR :1; /**<Reads error bit which is set when a write occurs before a previous write to the same register has completed. */
__IO uint32_t BSY_ANY_WRT :1; /**<Busy with any write.*/
__IO uint32_t BSY_SUB_SEC_CNTR_REG_WRT :1; /**<Busy with a sub-second counter register write.*/
__IO uint32_t BSY_SEC_CNTR_REG_WRT :1; /**<Busy with a second counter register write.*/
__IO uint32_t BSY_SUB_SEC_ALRM_REG_WRT :1; /**<Busy with a sub-second alarm register write.*/
__IO uint32_t BSY_SEC_ALRM_REG_WRT:1; /**<Busy with a second alarm register write.*/
__IO uint32_t BSY_CTRL_REG_WRT :1; /**<Busy with a control register write.*/
__IO uint32_t BSY_SUB_SEC_INT_CLR_WRT :1; /**<Busy with a sub-second interrupt clear write.*/
__IO uint32_t BSY_SEC_INT_CLR_WRT :1; /**<Busy with a second interrupt clear write.*/
} BITS;
__IO uint32_t WORD;
} STATUS; /* 0x4000F014 */
union {
struct {
__O uint32_t SUB_SECOND :1; /**<Write 1 to this register to clear the sub-second interrupt.*/
__O uint32_t SECOND :1; /**<Write 1 to this register to clear the second interrupt.*/
} BITS;
__O uint32_t WORD;
} INT_CLEAR; /* 0x4000F018 */
#endif /* REVD */
} RtcReg_t, *RtcReg_pt;
#endif /* RTC_MAP_H_ */
