/**
******************************************************************************
* @file stm32l4xx_hal_cryp.h
* @author MCD Application Team
* @version V1.5.1
* @date 31-May-2016
* @brief Header file of CRYP HAL module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L4xx_HAL_CRYP_H
#define __STM32L4xx_HAL_CRYP_H
#ifdef __cplusplus
extern "C" {
#endif
#if defined (STM32L442xx) || defined (STM32L443xx) || defined(STM32L485xx) || defined(STM32L486xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx_hal_def.h"
/** @addtogroup STM32L4xx_HAL_Driver
* @{
*/
/** @addtogroup CRYP
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup CRYP_Exported_Types CRYP Exported Types
* @{
*/
/**
* @brief CRYP Configuration Structure definition
*/
typedef struct
{
uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
This parameter can be a value of @ref CRYP_Data_Type */
uint32_t KeySize; /*!< 128 or 256-bit key length.
This parameter can be a value of @ref CRYP_Key_Size */
uint32_t OperatingMode; /*!< AES operating mode.
This parameter can be a value of @ref CRYP_AES_OperatingMode */
uint32_t ChainingMode; /*!< AES chaining mode.
This parameter can be a value of @ref CRYP_AES_ChainingMode */
uint32_t KeyWriteFlag; /*!< Allows to bypass or not key write-up before decryption.
This parameter can be a value of @ref CRYP_Key_Write */
uint32_t GCMCMACPhase; /*!< Indicates the processing phase of the Galois Counter Mode (GCM),
Galois Message Authentication Code (GMAC) or Cipher Message
Authentication Code (CMAC) mode.
This parameter can be a value of @ref CRYP_GCM_CMAC_Phase */
uint8_t* pKey; /*!< Encryption/Decryption Key */
uint8_t* pInitVect; /*!< Initialization Vector used for CTR, CBC, GCM/GMAC and CMAC modes */
uint8_t* Header; /*!< Header used in GCM/GMAC and CMAC modes */
uint64_t HeaderSize; /*!< Header size in bytes */
}CRYP_InitTypeDef;
/**
* @brief HAL CRYP State structures definition
*/
typedef enum
{
HAL_CRYP_STATE_RESET = 0x00, /*!< CRYP not yet initialized or disabled */
HAL_CRYP_STATE_READY = 0x01, /*!< CRYP initialized and ready for use */
HAL_CRYP_STATE_BUSY = 0x02, /*!< CRYP internal processing is ongoing */
HAL_CRYP_STATE_TIMEOUT = 0x03, /*!< CRYP timeout state */
HAL_CRYP_STATE_ERROR = 0x04, /*!< CRYP error state */
HAL_CRYP_STATE_SUSPENDED = 0x05 /*!< CRYP suspended */
}HAL_CRYP_STATETypeDef;
/**
* @brief HAL CRYP phase structures definition
*/
typedef enum
{
HAL_CRYP_PHASE_READY = 0x01, /*!< CRYP peripheral is ready for initialization. */
HAL_CRYP_PHASE_PROCESS = 0x02, /*!< CRYP peripheral is in processing phase */
HAL_CRYP_PHASE_START = 0x03, /*!< CRYP peripheral has been initialized but GCM/GMAC/CMAC
initialization phase has not started */
HAL_CRYP_PHASE_INIT_OVER = 0x04, /*!< GCM/GMAC/CMAC init phase has been carried out */
HAL_CRYP_PHASE_HEADER_OVER = 0x05, /*!< GCM/GMAC/CMAC header phase has been carried out */
HAL_CRYP_PHASE_PAYLOAD_OVER = 0x06, /*!< GCM/GMAC/CMAC payload phase has been carried out */
HAL_CRYP_PHASE_FINAL_OVER = 0x07, /*!< GCM/GMAC/CMAC final phase has been carried out */
HAL_CRYP_PHASE_HEADER_SUSPENDED = 0x08, /*!< GCM/GMAC/CMAC header phase has been suspended */
HAL_CRYP_PHASE_PAYLOAD_SUSPENDED = 0x09, /*!< GCM/GMAC payload phase has been suspended */
HAL_CRYP_PHASE_NOT_USED = 0x0a /*!< Phase is irrelevant to the current chaining mode */
}HAL_PhaseTypeDef;
/**
* @brief HAL CRYP mode suspend definitions
*/
typedef enum
{
HAL_CRYP_SUSPEND_NONE = 0x00, /*!< CRYP peripheral suspension not requested */
HAL_CRYP_SUSPEND = 0x01 /*!< CRYP peripheral suspension requested */
}HAL_SuspendTypeDef;
/**
* @brief HAL CRYP Error Codes definition
*/
#define HAL_CRYP_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
#define HAL_CRYP_WRITE_ERROR ((uint32_t)0x00000001) /*!< Write error */
#define HAL_CRYP_READ_ERROR ((uint32_t)0x00000002) /*!< Read error */
#define HAL_CRYP_DMA_ERROR ((uint32_t)0x00000004) /*!< DMA error */
#define HAL_CRYP_BUSY_ERROR ((uint32_t)0x00000008) /*!< Busy flag error */
/**
* @brief CRYP handle Structure definition
*/
typedef struct
{
AES_TypeDef *Instance; /*!< Register base address */
CRYP_InitTypeDef Init; /*!< CRYP initialization parameters */
uint8_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) input buffer */
uint8_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) output buffer */
uint32_t CrypInCount; /*!< Input data size in bytes or, after suspension, the remaining
number of bytes to process */
uint32_t CrypOutCount; /*!< Output data size in bytes */
HAL_PhaseTypeDef Phase; /*!< CRYP peripheral processing phase for GCM, GMAC or CMAC modes.
Indicates the last phase carried out to ease
phase transitions */
DMA_HandleTypeDef *hdmain; /*!< CRYP peripheral Input DMA handle parameters */
DMA_HandleTypeDef *hdmaout; /*!< CRYP peripheral Output DMA handle parameters */
HAL_LockTypeDef Lock; /*!< CRYP locking object */
__IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */
__IO uint32_t ErrorCode; /*!< CRYP peripheral error code */
HAL_SuspendTypeDef SuspendRequest; /*!< CRYP peripheral suspension request flag */
}CRYP_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CRYP_Exported_Constants CRYP Exported Constants
* @{
*/
/** @defgroup CRYP_Key_Size Key size selection
* @{
*/
#define CRYP_KEYSIZE_128B ((uint32_t)0x00000000) /*!< 128-bit long key */
#define CRYP_KEYSIZE_256B AES_CR_KEYSIZE /*!< 256-bit long key */
/**
* @}
*/
/** @defgroup CRYP_Data_Type AES Data Type selection
* @{
*/
#define CRYP_DATATYPE_32B ((uint32_t)0x00000000) /*!< 32-bit data type (no swapping) */
#define CRYP_DATATYPE_16B AES_CR_DATATYPE_0 /*!< 16-bit data type (half-word swapping) */
#define CRYP_DATATYPE_8B AES_CR_DATATYPE_1 /*!< 8-bit data type (byte swapping) */
#define CRYP_DATATYPE_1B AES_CR_DATATYPE /*!< 1-bit data type (bit swapping) */
/**
* @}
*/
/** @defgroup CRYP_AES_State AES Enable state
* @{
*/
#define CRYP_AES_DISABLE ((uint32_t)0x00000000) /*!< Disable AES */
#define CRYP_AES_ENABLE AES_CR_EN /*!< Enable AES */
/**
* @}
*/
/** @defgroup CRYP_AES_OperatingMode AES operating mode
* @{
*/
#define CRYP_ALGOMODE_ENCRYPT ((uint32_t)0x00000000) /*!< Encryption mode */
#define CRYP_ALGOMODE_KEYDERIVATION AES_CR_MODE_0 /*!< Key derivation mode */
#define CRYP_ALGOMODE_DECRYPT AES_CR_MODE_1 /*!< Decryption */
#define CRYP_ALGOMODE_KEYDERIVATION_DECRYPT AES_CR_MODE /*!< Key derivation and decryption */
#define CRYP_ALGOMODE_TAG_GENERATION ((uint32_t)0x00000000) /*!< GMAC or CMAC authentication tag generation */
/**
* @}
*/
/** @defgroup CRYP_AES_ChainingMode AES chaining mode
* @{
*/
#define CRYP_CHAINMODE_AES_ECB ((uint32_t)0x00000000) /*!< Electronic codebook chaining algorithm */
#define CRYP_CHAINMODE_AES_CBC AES_CR_CHMOD_0 /*!< Cipher block chaining algorithm */
#define CRYP_CHAINMODE_AES_CTR AES_CR_CHMOD_1 /*!< Counter mode chaining algorithm */
#define CRYP_CHAINMODE_AES_GCM_GMAC (AES_CR_CHMOD_0 | AES_CR_CHMOD_1) /*!< Galois counter mode - Galois message authentication code */
#define CRYP_CHAINMODE_AES_CMAC AES_CR_CHMOD_2 /*!< Cipher message authentication code */
/**
* @}
*/
/** @defgroup CRYP_Key_Write AES decryption key write-up flag
* @{
*/
#define CRYP_KEY_WRITE_ENABLE ((uint32_t)0x00000000) /*!< Enable decryption key writing */
#define CRYP_KEY_WRITE_DISABLE ((uint32_t)0x00000001) /*!< Disable decryption key writing */
/**
* @}
*/
/** @defgroup CRYP_DMAIN DMA Input phase management enable state
* @{
*/
#define CRYP_DMAIN_DISABLE ((uint32_t)0x00000000) /*!< Disable DMA Input phase management */
#define CRYP_DMAIN_ENABLE AES_CR_DMAINEN /*!< Enable DMA Input phase management */
/**
* @}
*/
/** @defgroup CRYP_DMAOUT DMA Output phase management enable state
* @{
*/
#define CRYP_DMAOUT_DISABLE ((uint32_t)0x00000000) /*!< Disable DMA Output phase management */
#define CRYP_DMAOUT_ENABLE AES_CR_DMAOUTEN /*!< Enable DMA Output phase management */
/**
* @}
*/
/** @defgroup CRYP_GCM_CMAC_Phase GCM/GMAC and CMAC processing phase selection
* @{
*/
#define CRYP_GCM_INIT_PHASE ((uint32_t)0x00000000) /*!< GCM/GMAC init phase */
#define CRYP_GCMCMAC_HEADER_PHASE AES_CR_GCMPH_0 /*!< GCM/GMAC or CMAC header phase */
#define CRYP_GCM_PAYLOAD_PHASE AES_CR_GCMPH_1 /*!< GCM payload phaset */
#define CRYP_GCMCMAC_FINAL_PHASE AES_CR_GCMPH /*!< GCM/GMAC or CMAC final phase */
/**
* @}
*/
/** @defgroup CRYP_Flags AES status flags
* @{
*/
#define CRYP_FLAG_BUSY AES_SR_BUSY /*!< GCM process suspension forbidden */
#define CRYP_FLAG_WRERR AES_SR_WRERR /*!< Write Error */
#define CRYP_FLAG_RDERR AES_SR_RDERR /*!< Read error */
#define CRYP_FLAG_CCF AES_SR_CCF /*!< Computation completed */
/**
* @}
*/
/** @defgroup CRYP_Clear_Flags AES clearing flags
* @{
*/
#define CRYP_CCF_CLEAR AES_CR_CCFC /*!< Computation Complete Flag Clear */
#define CRYP_ERR_CLEAR AES_CR_ERRC /*!< Error Flag Clear */
/**
* @}
*/
/** @defgroup AES_Interrupts_Enable AES Interrupts Enable bits
* @{
*/
#define CRYP_IT_CCFIE AES_CR_CCFIE /*!< Computation Complete interrupt enable */
#define CRYP_IT_ERRIE AES_CR_ERRIE /*!< Error interrupt enable */
/**
* @}
*/
/** @defgroup CRYP_Interrupts_Flags AES Interrupts flags
* @{
*/
#define CRYP_IT_WRERR AES_SR_WRERR /*!< Write Error */
#define CRYP_IT_RDERR AES_SR_RDERR /*!< Read Error */
#define CRYP_IT_CCF AES_SR_CCF /*!< Computation completed */
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup CRYP_Exported_Macros CRYP Exported Macros
* @{
*/
/** @brief Reset CRYP handle state.
* @param __HANDLE__: specifies the CRYP handle.
* @retval None
*/
#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET)
/**
* @brief Enable the CRYP AES peripheral.
* @retval None
*/
#define __HAL_CRYP_ENABLE() (AES->CR |= AES_CR_EN)
/**
* @brief Disable the CRYP AES peripheral.
* @retval None
*/
#define __HAL_CRYP_DISABLE() (AES->CR &= ~AES_CR_EN)
/**
* @brief Set the algorithm operating mode.
* @param __OPERATING_MODE__: specifies the operating mode
* This parameter can be one of the following values:
* @arg @ref CRYP_ALGOMODE_ENCRYPT encryption
* @arg @ref CRYP_ALGOMODE_KEYDERIVATION key derivation
* @arg @ref CRYP_ALGOMODE_DECRYPT decryption
* @arg @ref CRYP_ALGOMODE_KEYDERIVATION_DECRYPT key derivation and decryption
* @retval None
*/
#define __HAL_CRYP_SET_OPERATINGMODE(__OPERATING_MODE__) MODIFY_REG(AES->CR, AES_CR_MODE, (__OPERATING_MODE__))
/**
* @brief Set the algorithm chaining mode.
* @param __CHAINING_MODE__: specifies the chaining mode
* This parameter can be one of the following values:
* @arg @ref CRYP_CHAINMODE_AES_ECB Electronic CodeBook
* @arg @ref CRYP_CHAINMODE_AES_CBC Cipher Block Chaining
* @arg @ref CRYP_CHAINMODE_AES_CTR CounTeR mode
* @arg @ref CRYP_CHAINMODE_AES_GCM_GMAC Galois Counter Mode or Galois Message Authentication Code
* @arg @ref CRYP_CHAINMODE_AES_CMAC Cipher Message Authentication Code
* @retval None
*/
#define __HAL_CRYP_SET_CHAININGMODE(__CHAINING_MODE__) MODIFY_REG(AES->CR, AES_CR_CHMOD, (__CHAINING_MODE__))
/** @brief Check whether the specified CRYP status flag is set or not.
* @param __FLAG__: specifies the flag to check.
* This parameter can be one of the following values:
* @arg @ref CRYP_FLAG_BUSY GCM process suspension forbidden
* @arg @ref CRYP_IT_WRERR Write Error
* @arg @ref CRYP_IT_RDERR Read Error
* @arg @ref CRYP_IT_CCF Computation Complete
* @retval The state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_CRYP_GET_FLAG(__FLAG__) ((AES->SR & (__FLAG__)) == (__FLAG__))
/** @brief Clear the CRYP pending status flag.
* @param __FLAG__: specifies the flag to clear.
* This parameter can be one of the following values:
* @arg @ref CRYP_ERR_CLEAR Read (RDERR) or Write Error (WRERR) Flag Clear
* @arg @ref CRYP_CCF_CLEAR Computation Complete Flag (CCF) Clear
* @retval None
*/
#define __HAL_CRYP_CLEAR_FLAG(__FLAG__) SET_BIT(AES->CR, (__FLAG__))
/** @brief Check whether the specified CRYP interrupt source is enabled or not.
* @param __INTERRUPT__: CRYP interrupt source to check
* This parameter can be one of the following values:
* @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR)
* @arg @ref CRYP_IT_CCFIE Computation Complete interrupt
* @retval State of interruption (TRUE or FALSE).
*/
#define __HAL_CRYP_GET_IT_SOURCE(__INTERRUPT__) ((AES->CR & (__INTERRUPT__)) == (__INTERRUPT__))
/** @brief Check whether the specified CRYP interrupt is set or not.
* @param __INTERRUPT__: specifies the interrupt to check.
* This parameter can be one of the following values:
* @arg @ref CRYP_IT_WRERR Write Error
* @arg @ref CRYP_IT_RDERR Read Error
* @arg @ref CRYP_IT_CCF Computation Complete
* @retval The state of __INTERRUPT__ (TRUE or FALSE).
*/
#define __HAL_CRYP_GET_IT(__INTERRUPT__) ((AES->SR & (__INTERRUPT__)) == (__INTERRUPT__))
/** @brief Clear the CRYP pending interrupt.
* @param __INTERRUPT__: specifies the IT to clear.
* This parameter can be one of the following values:
* @arg @ref CRYP_ERR_CLEAR Read (RDERR) or Write Error (WRERR) Flag Clear
* @arg @ref CRYP_CCF_CLEAR Computation Complete Flag (CCF) Clear
* @retval None
*/
#define __HAL_CRYP_CLEAR_IT(__INTERRUPT__) SET_BIT(AES->CR, (__INTERRUPT__))
/**
* @brief Enable the CRYP interrupt.
* @param __INTERRUPT__: CRYP Interrupt.
* This parameter can be one of the following values:
* @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR)
* @arg @ref CRYP_IT_CCFIE Computation Complete interrupt
* @retval None
*/
#define __HAL_CRYP_ENABLE_IT(__INTERRUPT__) ((AES->CR) |= (__INTERRUPT__))
/**
* @brief Disable the CRYP interrupt.
* @param __INTERRUPT__: CRYP Interrupt.
* This parameter can be one of the following values:
* @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR)
* @arg @ref CRYP_IT_CCFIE Computation Complete interrupt
* @retval None
*/
#define __HAL_CRYP_DISABLE_IT(__INTERRUPT__) ((AES->CR) &= ~(__INTERRUPT__))
/**
* @}
*/
/* Private macros --------------------------------------------------------*/
/** @addtogroup CRYP_Private_Macros CRYP Private Macros
* @{
*/
/**
* @brief Verify the key size length.
* @param __KEYSIZE__: Ciphering/deciphering algorithm key size.
* @retval SET (__KEYSIZE__ is a valid value) or RESET (__KEYSIZE__ is invalid)
*/
#define IS_CRYP_KEYSIZE(__KEYSIZE__) (((__KEYSIZE__) == CRYP_KEYSIZE_128B) || \
((__KEYSIZE__) == CRYP_KEYSIZE_256B))
/**
* @brief Verify the input data type.
* @param __DATATYPE__: Ciphering/deciphering algorithm input data type.
* @retval SET (__DATATYPE__ is valid) or RESET (__DATATYPE__ is invalid)
*/
#define IS_CRYP_DATATYPE(__DATATYPE__) (((__DATATYPE__) == CRYP_DATATYPE_32B) || \
((__DATATYPE__) == CRYP_DATATYPE_16B) || \
((__DATATYPE__) == CRYP_DATATYPE_8B) || \
((__DATATYPE__) == CRYP_DATATYPE_1B))
/**
* @brief Verify the CRYP AES IP running mode.
* @param __MODE__: CRYP AES IP running mode.
* @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
*/
#define IS_CRYP_AES(__MODE__) (((__MODE__) == CRYP_AES_DISABLE) || \
((__MODE__) == CRYP_AES_ENABLE))
/**
* @brief Verify the selected CRYP algorithm.
* @param __ALGOMODE__: Selected CRYP algorithm (ciphering, deciphering, key derivation or a combination of the latter).
* @retval SET (__ALGOMODE__ is valid) or RESET (__ALGOMODE__ is invalid)
*/
#define IS_CRYP_ALGOMODE(__ALGOMODE__) (((__ALGOMODE__) == CRYP_ALGOMODE_ENCRYPT) || \
((__ALGOMODE__) == CRYP_ALGOMODE_KEYDERIVATION) || \
((__ALGOMODE__) == CRYP_ALGOMODE_DECRYPT) || \
((__ALGOMODE__) == CRYP_ALGOMODE_TAG_GENERATION) || \
((__ALGOMODE__) == CRYP_ALGOMODE_KEYDERIVATION_DECRYPT))
/**
* @brief Verify the selected CRYP chaining algorithm.
* @param __CHAINMODE__: Selected CRYP chaining algorithm.
* @retval SET (__CHAINMODE__ is valid) or RESET (__CHAINMODE__ is invalid)
*/
#define IS_CRYP_CHAINMODE(__CHAINMODE__) (((__CHAINMODE__) == CRYP_CHAINMODE_AES_ECB) || \
((__CHAINMODE__) == CRYP_CHAINMODE_AES_CBC) || \
((__CHAINMODE__) == CRYP_CHAINMODE_AES_CTR) || \
((__CHAINMODE__) == CRYP_CHAINMODE_AES_GCM_GMAC) || \
((__CHAINMODE__) == CRYP_CHAINMODE_AES_CMAC))
/**
* @brief Verify the deciphering key write option.
* @param __WRITE__: deciphering key write option.
* @retval SET (__WRITE__ is valid) or RESET (__WRITE__ is invalid)
*/
#define IS_CRYP_WRITE(__WRITE__) (((__WRITE__) == CRYP_KEY_WRITE_ENABLE) || \
((__WRITE__) == CRYP_KEY_WRITE_DISABLE))
/**
* @brief Verify the CRYP input data DMA mode.
* @param __MODE__: CRYP input data DMA mode.
* @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
*/
#define IS_CRYP_DMAIN(__MODE__) (((__MODE__) == CRYP_DMAIN_DISABLE) || \
((__MODE__) == CRYP_DMAIN_ENABLE))
/**
* @brief Verify the CRYP output data DMA mode.
* @param __MODE__: CRYP output data DMA mode.
* @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
*/
#define IS_CRYP_DMAOUT(__MODE__) (((__MODE__) == CRYP_DMAOUT_DISABLE) || \
((__MODE__) == CRYP_DMAOUT_ENABLE))
/**
* @brief Verify the CRYP AES ciphering/deciphering/authentication algorithm phase.
* @param __PHASE__: CRYP AES ciphering/deciphering/authentication algorithm phase.
* @retval SET (__PHASE__ is valid) or RESET (__PHASE__ is invalid)
*/
#define IS_CRYP_GCMCMAC_PHASE(__PHASE__) (((__PHASE__) == CRYP_GCM_INIT_PHASE) || \
((__PHASE__) == CRYP_GCMCMAC_HEADER_PHASE) || \
((__PHASE__) == CRYP_GCM_PAYLOAD_PHASE) || \
((__PHASE__) == CRYP_GCMCMAC_FINAL_PHASE))
/**
* @}
*/
/* Include CRYP HAL Extended module */
#include "stm32l4xx_hal_cryp_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup CRYP_Exported_Functions CRYP Exported Functions
* @{
*/
/** @addtogroup CRYP_Exported_Functions_Group1 Initialization and deinitialization functions
* @{
*/
/* Initialization/de-initialization functions ********************************/
HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp);
HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp);
/* MSP initialization/de-initialization functions ****************************/
void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);
void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);
/**
* @}
*/
/** @addtogroup CRYP_Exported_Functions_Group2 AES processing functions
* @{
*/
/* AES encryption/decryption processing functions ****************************/
/* AES encryption/decryption using polling ***********************************/
HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
/* AES encryption/decryption using interrupt *********************************/
HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
/* AES encryption/decryption using DMA ***************************************/
HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
/**
* @}
*/
/** @addtogroup CRYP_Exported_Functions_Group3 Callback functions
* @{
*/
/* CallBack functions ********************************************************/
void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);
void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);
void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp);
/**
* @}
*/
/** @addtogroup CRYP_Exported_Functions_Group4 CRYP IRQ handler
* @{
*/
/* AES interrupt handling function *******************************************/
void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp);
/**
* @}
*/
/** @addtogroup CRYP_Exported_Functions_Group5 Peripheral State functions
* @{
*/
/* Peripheral State functions ************************************************/
HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp);
uint32_t HAL_CRYP_GetError(CRYP_HandleTypeDef *hcryp);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined (STM32L442xx) || defined (STM32L443xx) || defined(STM32L485xx) || defined(STM32L486xx) */
#ifdef __cplusplus
}
#endif
#endif /* __STM32L4xx_HAL_CRYP_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
